Cast Iron Sewage Submersible Pumps

High Head Large Capacity Centrifugal Vertical Cast Iron Submersible Sewage Pump Usage: farm irrigation, mining and so on.

Supplier: En590 10 , d6 , naphtha , jetfuel, nigerian crude, petcoke, and iron ore ( mexico origin )
Buyer: Used/second hand equipment, machinery, plants, granular sulphur

Flow: 20m3/h Head: 30m Power: 3kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage.

Supplier: Pump pv22, used korean hyundai & kia engine with gearbox, organic fertilizer, used volvo and scania engine with gearbox, arnold palmer golf shoes

Pump range: Capacity: 8 8980 m3/h Head: 3 60 m Speed: 495 / 590 / 730 /980 /1470 / 2940 rpm Power: 11kW 580kW Voltage: 380V, 6kV or 10kV Discharge Dia.: DN65 DN 1000 Medium Temp.: â?¤ 40 Degree Pump Weight: 128 10000 kg Description: The submersible sewage pumps can meet the needs in the aspects of municipal engineering such as flood control pumping station and integrated pumping station, building construction, industrial sewage, waste water treatment, environmental protection, irrigation etc. They can be used to convey sewage, wastewater and urban sewage which contain solid particles and various long fibers. Our submersible sewage pump can be installed by auto-coupling device (QDC), hard pipe and soft pipe, fixed and movable installation, and dry type installation with cooling jacket.

Detailed product description Model: qwb, qzb Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:

QW/WQ Submersible Sewage Pump Application: Municipal works, Industrial buildings Hotels, Hospitals, Civil air defence Drain off the sewage, waste water, rainwater and living water containing solid grains and various long fabrics QW/WQ Submersible Sewage Pump Feather: 1. ) Impeller: With single-channel or double-channel impeller, which is similar to an elbow of the same section, the pump is particularly suitable for the medium containing solid particles( particle size: 50% pump flange size). 2. ) Mechanical seal: Double-channel mechanical seal in series(doule seal type), with durable wear and corrosion resisting seal material. Motor side: Ceramic/Ceramic Pump side: Silicon carbide/Hard Alloy 3. ) Bearing. Three sets. One at the motor side and two at the pump side. SKF and NTN type bearing available if request. 4. ) Oil and water probe: Once the mechanical seal damages and water comes insides, the probe will send out signal to make the protection action. 5. ) Float switch: If request, with pump control cabinet, the float switch can automatically control the pump stop/start according to the water level 6). Movable and fixed installation optional, and double guide automatic rail available. 7. ) Motor: Insulation class: Class F, and protection class 58 Capacity range(m3/h) 5---3000 Head range(m3/h) 7---60 Outlet size(mm) 25---500 Power(kw) 0.75---250 Material: Cast iron, SS302,SS304,SS316 Shaft seal(mechanicalseal) SIC,TC, ceramic,graphite... Temp up to 120 degree PH 3-11 Installation Movalbe or auto coupling type Water leakage probe float switch.