Oilfield Decanter Centrifuge Working Principle:
Decanter Centrifuge is driven by two motors. The main motor drives the drum and the outer casing of differential through belts while the auxiliary motor, after the differential shifting speed, drives the spiral propeller. This will make the drum and the spiral propeller rotate in the same direction with a certain differential speed.
Decanter Centrifuge Features and Benefits: 1. Innovative design includes longer bowl, allowing drilling fluids to thread through more slowly, thus resulting in drier solids and finer separation point; 2. Big bowl offers big volume. It also generates high-G force; 3. Stainless steel bowl, scroll, compartment are available and covered with corrosion-proof coating so as to have longer lifespan; 4. Tungsten carbide scroll points with wide spacing flights at tapered end create a finer layer of conveyed solids for consistent, uniform separation and maximum solids control efficiency. 5. German FAG or Swedish SKF brand bearings are available; 6. Electrical Components complies with SIEMENS/Schneider ATEX or IEC Ex. 7. Screw pump and submersible slurry pump are provided to meet liquid feeding requirements of centrifuge of various customers
LW means horizontal spiral type which is a normal model of decanting centrifuge Solids. Decanter Centrifuge is the last stage equipment in drilling mud system for solids control and mud cleaning. The superiority of Decanting Centrifuge is embodied in the solids processing size. Decanter Centrifuge could remove the solid particles with size 2-7 microns using the principle of centrifugal action, it is an ideal choice for separating particles in drilling mud. Always there is a screw pump or submersible pump to feed the mud to Decanter Centrifuge. After the drilling fluids being fed into the centrifuge drum, under the function of centrifugal force, solid phase particles are pushed to the internal wall of the drum, then to the solid discharge export of the small end of the drum and excreted. While the fluids is excreted from the overflow hole of the large end. Such cycle is to achieve the purpose of continuous separation. High speed decanting centrifuge are more effective for separation of fine solids.
The feed product is pumped into the decanter centrifuge through an inlet. Feed into a horizontal bowl and then rotate. The bowl consists of a cylindrical portion and a conical portion. The separation takes place in the cylindrical part of the bowl. Fast rotation produces centrifugal forces of up to 4000 x g. Under these forces, solid particles with a higher density are collected and compacted on the wall of the bowl. The scroll (also a screw conveyor or screw conveyor) rotates inside the bowl at slightly different speeds. This speed difference is called a differential speed. In this way, the scroll conveys the precipitated particles along the cylindrical portion of the bowl to the conical end of the bowl. At the smallest end of the conical portion of the filter bowl, dehydrated solids leave the filter bowl through the discharge port. The clarified liquid exits through the mating disc (internal centrifugal pump).
Decanter centrifuges process characteristics The separation process in a decanter centrifuge relies on a few process characteristics such as centrifugal force or force, sedimentation rate and separating factor, differential speed between the conveyor and bowl, and clarity of the liquid discharge. Decanter centrifuges require a centrifugal force for the separation of the solids from the liquid. This characteristic is dependent on the radius of the centrifuge and its angular rotational speed. A decanter centrifuge applies a force equivalent to several thousand , which reduces the settling time of the particles. It is also favored to maintain a large force, which will result in an improved separation. The rate at which sedimentation occurs is an important characteristic of the decanter centrifuge separation process. The sedimentation rate is influenced by the particle size, the shapes of the particles, their differential densities and the viscosity between the particles and the liquid. This process characteristic can be improved by utilizing flocculating agents. The sedimentation rate is also dependent on the separating factor of the decanter centrifuge, which is related to the centrifugal force. The exterior bowl and the scroll conveyor rotate at different high speeds. This differential speed between the two is accountable for the sedimentation throughout the decanter centrifuge cylinder. A high differential speed results in a smaller residence time of the cake settlement, so it is necessary to keep the cake thickness to a minimum to avoid impairing the discharge quality. Keeping the cake thickness to a minimum also aids in the improvement of the cake dewatering process. For this reason, it is necessary to obtain an optimal differential speed to balance the cake thickness and quality. The characteristic above all affects the clarity of the liquid output which is dependent on the volumetric throughout rate, where a higher flow rate will result in a poor liquid clarity. Another characteristic that influences the clarity of the liquid output is the differential speed. A low differential speed results in a better clarity, therefore, aiding in the separation process. The Force also plays a role in the clarity of the liquid discharge. Higher force results in an increase in the separation of the solid particles from the liquid and yields a better clarity.
By separating the water and solids from the sewage, nightsoil, and livestock wastewater sludge as well as the sludge from a concentration and from the dewatering process, this centrfuge maintains a constant cake moisture content and recovery rate.
The Centrifuge can be used in various fields where various types and shapes of contrifuges are needed, such as in the sludge from civil engineering works and in the chemical, food processing, and steel industries.
It is used when the solids are in a poor condition because of extra sedimentation and the mixed sludge from livestock, nightsoil, andsewage treatment plants.
Our company is the largest producer of the decanter centrifuge in China! Sludge Decanter Centrifuges Features: 1. Designed with compact structure and pleasant appearance 2. With large processing volume and above 98% solid capture rate 3. Automatic control, which enables low operation intensity and reliable operation 4. With small space occupation, consecutive work and low noise level LW Horizontal Decanter Centrifuges feature continuous feeding and discharge . This chemical separation equipment has been applied two-phase(solid-liquid) and three-phase(solid-liquid-liquid) slurries separation industry of chemicals, pharmaceutical, environment protection, as well as mining and food, etc.
Description : LW Sedimentation Centrifuge is a horizontal, continuously working and continuously spiral discharging sedimentation centrifuge. It is used in a variety or industries for separating all kinds of solid liquid suspension, defecating liquid phase with graded grains, and dehydrating sludge.
