Aluminum Plate/sheet

What Is 2024 Aluminum Sheet 2024 aluminum plate, a typical hard aluminum, belongs to the aluminum-copper-magnesium aluminum alloy. It is of well-matched composition and excellent comprehensive performance. It is widely used in aircraft structures, rivets, truck hubs, propeller components and other structural components. 7075 aluminum plate is another choice. Properties of 2024 Aluminum Sheet/Plate The tensile strength of the alloy plate is 400-500MPa, and the heat resistance and fatigue resistance of the alloy are better than that of the alloy. It is of high strength and good hear resistance, which can be used as working parts below 150â??. The strength of 2024 aluminum alloy is better than 7075 plate when the temperature is over 125. Its properties are all better in the hot state, annealing and quenching conditions. Heat treatment strengthening effect is obvious. It is of poor corrosion resistance, but it can be effectively protected by coating with pure aluminum It is easy to crack when welding, but it can be welded by special process or riveted.

5052 aluminum plate is an AL-Mg alloy aluminum plate, which combines the advantages of 3 series anti-rust aluminum and the excellent formability of 5 series. It has moderate strength, especially fatigue resistance: high plasticity and corrosion resistance, cannot be strengthened by heat treatment, and is durable. Good corrosion, good weldability, poor machinability, can be polished. Application areas: transportation vehicles, ship sheet metal parts, aircraft fuel tanks, etc. 5083 aluminum plate belongs to the Al-Mg series alloy and is widely used. Especially in the construction industry, this alloy is inseparable and it is a promising alloy. It has good corrosion resistance, excellent weldability, good cold workability, and medium strength. Application fields: ships, automobiles, aircraft welding parts, subway and light rail, etc. 5754 aluminum coil is a typical aluminum plate among Al-Mg alloys. It has the characteristics of medium strength, good corrosion resistance, weldability and easy processing and forming. Application areas: automobile manufacturing industry, doors, bodies, seals, etc. 5182 aluminum plate has good corrosion resistance, excellent weldability, good cold workability, and medium strength. Application areas: automobile body panels, control panels, reinforcements, automobile fuel tanks, electrical appliance casings, etc. Status: O, H32, H34, H36, H38, H111, H112 Surface treatment: smooth aluminum, mirror, patterned aluminum plate Packaging and transportation: simple packaging, refined packaging, logistics packaging, foreign trade shipping packaging (fumigated wooden pallet optional) Please contact us for specific parameters and we will give you a detailed quotation.

Sino Unicorn International Co., Limited is specialized in the marketing and distribution of  aluminum plate, sheet and other flat rolled products, aluminum extruded products and forged products., with close cooperation with Chinese leading aluminum product manufacturers. We supply to a variety of industries such as aerospace, automotive, commercial transportation, consumer electronics, building and construction, printing and packaging industry etc.. The advantage properties of aluminum alloy are light weight, excellent electrical and thermal conductivity, high corrosion resistance and ductility. Aluminum alloy is soft and usually alloyed with copper, zinc, magnesium, silicon, manganese and lithium to increase strength. When aluminum alloy is exposed to air, an anti-oxidant coating will be formed instantly to protect products. Aluminum alloy is one of the lightest metals.When aluminum ingot is passed between rolls under pressure, it becomes thinner and longer in the direction in which it is moving. This simple process is the basis for producing aluminum plate, sheet and foil. Sheet, the most widely used form of industrial aluminum, is used in applications including aerospace (the skins of planes), transportation (auto body sheet), packaging (can bodies and ends) and construction (building facades).  Standard Specification: GB/T 3880, ASTM B209, EN485 Alloy Temper 1xxx:1050,1051A, 1060, 1100 O, H12, H14, H16, H18, H22, H24, H26, H112 3xxx:3003, 3004, 3005, 3105 O, H12, H14, H16, H18, H22, H24, H26, H112 5xxx:5005, 5052, 5754, 5083 O, H22, H24, H26, H28, H32, H34, H36, H38, H111, H112 6xxx:6061, 6082 T4, T6, T451, T651 2xxx:2014, 2017,2024 T351, T451 7xxx:7075 T651  Size Range Dimension Range Thickness 0.5 ~ 6.0mm for sheet 6.0 ~ 150mm for plate Width 900 ~ 4000mm Length 2000 ~ 10000mm - Standard Width and Length: 1000x2000mm, 1250x2500mm, 1500x3000mm, 1219x2438mm, 1524x3048mm - Surface Finish: Mill finish, unless otherwise specified - Surface Protection: Paper interleaved, PE/PVC filming (if required)

Aluminium Sheet/Plate always used in oil tank, mould, instruments, lamps, rivet, refrigeration equipment , cryogenic equipment, drilling equipment, deck, marine dacilities, etc.......Aluminum Sheet/Plate Main Applications: Mainly used for signs, billboards, building exterior decoration, bus body, high-rise building and factory wall decoration, kitchen sink, lamps, fan blades, electronic parts, chemical equipment, sheet metal processing parts, deep drawing or spinning hollow parts, Welding parts, heat ex-changers, clock faces and discs, plates, kitchen utensils, decorations, reflective devices, etc. Aluminum Sheet/Plate Introduction Normal widths of aluminum sheets/Plate are 1000mm, 1250mm and 1500mm. Normal lengths are 2000mm, 2500mm and 3000mm. Aluminum sheets can be cut from the coils according to customer requirements. And the thickness ranges from 0.1 mm to 5.0 mm.

Aluminum tread plate-sheet International standard packing

ALLOY: 1100 1050 1060 3003 3105 5052 5754 5454 8011 5005 etc. TEMPER: HO H1* H2* H3* TXXX THICKNESS: 0.2mm-400mm WIDTH: 915mm-2200mm Specification: DC material, like 5052/5005/5083/5A05/5754/5182/6061/6082, belong to high -MG alloys Advantage: low density, high tensile strength and yield strength and so on Application: mostly used in aviation industry, mound, Construction, decoration, transportation machinery, machinery manufacturing, power machinery and so on.

Pure aluminum plate 1XXX series commonly used code 1050, 1060, 1100. in all aluminum plate series of pure aluminum plate series belongs to a series with more aluminum content. The purity can reach more than 99.00%. Because it does not contain other technical elements, so the production process is relatively single, the price is relatively cheap, is currently a series commonly used in the conventional industry. 1XXX aluminum plate characteristics 1. Small density: the density of pure aluminum is close to 2700kg/m3, about 35% of the density of iron. 2. Can be strengthened: pure aluminum through cold working can make its strength more than double. And can be alloyed by adding magnesium, zinc, copper, manganese, silicon, lithium, scandium and other elements, and then further strengthened by heat treatment, its specific strength can be comparable with the alloy steel. 3. Easy to process: aluminum with any kind of casting method casting. Aluminum plasticity is good, can be rolled into thin plates and foils; pulled into tubes and filaments; extruded into a variety of civil profiles; can be most of the machine tools can achieve a large speed for turning, milling, boring, planing and other machining. 4. Corrosion resistance: the surface of aluminum and its alloys, easy to generate a layer of dense, solid Al2O3 protective film. This layer of protective film only halogen ions or alkali ions under the intense action will be destroyed. Therefore, aluminum has a very good resistance to atmospheric (including industrial atmosphere and marine vapor) corrosion and water corrosion. Resistant to most acids and organic corrosion, the use of corrosion inhibitors, can be resistant to weak alkali corrosion; the use of protective measures, can improve the corrosion resistance of aluminum alloy. 5. No low-temperature brittleness: aluminum below zero degrees Celsius, as the temperature decreases, the strength and plasticity will not be reduced, but improved. 6. Good electrical and thermal conductivity: aluminum's electrical and thermal conductivity is second to silver, copper and gold. 7. Reflective: aluminum polished surface of white light reflectivity of more than 80%, the higher the purity, the higher the reflectivity. At the same time, aluminum to infrared, ultraviolet, electromagnetic waves, thermal radiation, etc. have good reflective properties. 8. Non-magnetic, non-sparking impact. 9. Sound-absorbing. 10. 10. Resistant to nuclear radiation. 11. Beautiful.

Alloy 5086 aluminum sheet have even higher strength than 5052 or 5083 and its mechanical properties vary significantly with hardening and temperature. It is not strengthened by heat treatment; instead, it becomes stronger due to strain hardening or cold working of the material. This alloy can be readily welded, retaining most of its mechanical strength. The good results with welding and good corrosion properties in seawater make Alloy 5086 extremely popular in marine applications. 5086 aluminum sheet has been used in vehicle armor plate due to its high strength factor.

Aluminum Sheets Plate Specifications of Aluminum Sheet : 1.Aluminum Sheet and Plate & Panel. 2.without oxidation and scratch. 3.Thickness:0.15mm-200mm 4.long-term of cooperation 5.the quality of the malitary level