Introduction
DTWL - 30G high precision thermostatic chamber ( - 30 65- 30 75 30 80 )is a specially designed constant temperature chamber with air as the heat transfer medium. It has the technical characteristics of high temperature control accuracy, good uniformity of temperature field and small fluctuation. There are many temperature measuring instruments that cannot contact the liquid constant temperature source, and are not suitable for calibration in a constant temperature bath. The emergence of a high - precision temperature box solves the calibration problem of such instruments and fills the gap of the constant temperature source and provides a complete solution.
Features
Using constant temperature liquid bath technology, the temperature field is more constant
Temperature control adopts liquid bath constant temperature and other plate heating technology. After the liquid medium is controlled to a constant temperature in the constant temperature bath, it is circulated to the outside of the working cavity. Through the heat radiation method, the temperature of the working cavity is constant and uniform. The cooling method has a qualitative leap in temperature indicators.
Intelligent
Integration of measurement technology and internet of things technology, wifi remote control, making measurement easier.
High - definition touch screen control, multi - touch, greatly improve the user experience.
One - key start, full automatic control, shorten the training period of measurement personnel.
Timing switch machine, remote switch machine, save time and improve verification efficiency.
Wide temperature range
High - precision temperature box series products can provide constant temperature environment within the range of - 40 100
Meet JJF1407 - 2013 WBGT Index Meter Thermometer Calibration Regulations
Meet JJF1366 - 2012 Temperature Data Acquisition Instrument Calibration Specification
High precision air bath constant temperature source
Using high - precision temperature control sensor, with imported temperature control table did not achieve high - precision temperature control, low indication deviation
Excellent quality
The shell adopts thick plate phosphating, passivation, spraying, anti - corrosion, anti - rust, salt spray resistance;
Liner adopts SUS304
High - precision sensor, using imported high - precision platinum resistance sensor
Function
HD touch
Using high - resolution capacitive screen, the display is clearer, multi - touch support, in line with customer mobile phone touch operation habits.
Wifi control
Mobile phone pad remotely set the temperature, start and stop the device, read the current temperature value and fluctuation degree and other device status.
Supplier: Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions.
Services: Shipping and transsportation
Buyer: Pvb layers, float glass, aluminium billets, aluminium rolls, galvanized rolls, machinery production lines of relevant products.
Supplier: Food (only pre packaged food), clothing wholesale, shoes and hats wholesale, knitted textiles and raw materials, hardware products; chemical products, office supplies, communication equipment, instruments and meters, glass products, agricultural and sideline products
Services: Import and export
Buyer: Yellow corn, sorghum
Constant Temperature Humidity Test Chamber 1. Criteria Performance indicators meet the requirements of GB5170, 2, 3, 5, 6-95 Basic parameters verification methods for environmental test equipment for electrical and electronic products low temperature, high temperature, constant humidity and alternating humidity and heat test equipment. Basic environmental test code for electrical and electronic products test A: low temperature test method GB 2423.1-89 (IEC68-2-1) Basic environmental test code for electrical and electronic products test B: high temperature test method GB 2423.2-89 (IEC68-2-2) Basic Environmental Test Rules for Electrical and Electronic Products Test Ca: Constant Humidity and Heat Test Method GB/T 2423.3-93 (IEC 68-2-3) Basic Environmental Test Rules for Electrical and Electronic Products Test Da: Alternating Humidity-Heat Test Method GB/T423.4-93 (IEC68-2-30) Control Methods and Characteristics Balanced temperature control system (BTHC) controls SSR by P.I.D. so that the heating and humidification of the system is equal to the loss of humidity and heat, so it can be used stably for a long time. 2. Refrigeration system 2.1 Compressor: fully packed compressor imported from France 2.2 Refrigerant: environmental friendly refrigerant R404A 2.3 Condenser: fin type heat sink motor 2.4 Evaporator: fin type multi-stage automatic load capacity adjustment 2.5 Other accessories: desiccant, refrigerant flow window, repair valve 2.6 Expansion system: capacity controlled refrigeration system 3. Main technical parameters Temperature range -40150 Temperature fluctuation ±0.5 Temperature deviation ±2 Heating time about 4 degrees /min (no load non-linearity) Cooling time about 1 degrees /min (no load non-linearity) Humidity range 20% ~ 98% R.H Humidity fluctuation 3% R.H Humidity deviation 3% 4. Structure and Material A. Inner box material: stainless steel plate (SUS #304 1.0 mm thick) B. Outer box material: stainless steel plate is atomized or baking varnish (SUS #304 1.0 mm thick). C. Insulation material: hard Polyurethane foam and glass wool. D. Air supply circulation system: (1) 90 W motor (2) stainless steel lengthened axle center (3) Multi leaf fan (SIRCCO FAN) E. Box door: single door, single window, left open, handle on the right hand side. (1) Window 270 x 360 x 40 mm 3-layer vacuum layer. (2) Planar embedded handle (3) Rear button: SUS #304
Supplier: Antigens, antibodies, uncut sheets, and finished ivd test kits
Laminated glass is one kind of safety glass, and when glass breakage, glass fragments adhering to the interlayer, it can be against forced entry, and avoid fragment damage. Sentryglas plus (SGP ) laminated glass ,0.89mm/1.52mm/2.28mm The main character: Stronger Performance : SGP glass is five times harder than PVB laminated glass, SGP film can let glass keep the shape ,without fall down.� SGP is suitable to use in stairs, flooring and overhead glazing, laminated glass , with outstanding post-breakage resistance to creep and collapse. Higher Transparence:� SGP film yellow index is only 10-25% of clear PVB ,it is best choice for low iron laminated glass process. Flexible UV option : SGP is good at both UV transmitting option and as traditional UV blocking interlayer. ,it can be made in a specialty, high-UV transmittance sheet, extremely useful when designing controlled environments for many life species .
JHG fire-resistant glass is combined with borosilicate glass and float glass technology, which fire resistant properties much superior to those of sode lime glass , the main character is : * high performance to bear high temperature , our tempered borosilicate glass 4.0 can withstand 120 minutes fire test . * Ultra light ,borostilicate glass 8% less than sode lime glass * Hign soften point in fire * High ligh transmission * No SO2 pollution ,no self-explosion Borosilicate 4.0 Technical data : Size: 1830*3000mm Density (g/cm�?�³) : 2.28�?�±0.1 Co-efficient of expansion (�?�±)(20-300�¢??) : 4.0�?�±0.1�??10-6k-1 Softening point(�¢??) : 845�?�±10 Light transmission :�?� �¢?�¥90(6mm) Main usage : 4.0 building partition ,facade ,door ,ceiling ,floor 3.3 household application ,optics , lighting
A corrosion inhibitor is a chemical compound or substance designed to mitigate or prevent corrosion, which is the deterioration of materials, particularly metals, due to chemical reactions with their environment. These inhibitors work by forming a protective layer on the metal's surface, blocking or slowing down the corrosion process. Corrosion inhibitors find extensive use in industries such as manufacturing, oil and gas, transportation, and infrastructure to prolong the lifespan of equipment, pipelines, and structures, ultimately saving costs and ensuring safety. They play a crucial role in safeguarding the integrity and functionality of metal components exposed to corrosive conditions, such as moisture, chemicals, or extreme temperatures.
Model Number: L-BT series Function: Temperature, humidity Volume: 40L ~ 64L Temperature range:-70 ~180 °C Ramp rate: 1 °C/min Humidity range: 20%RH~98%RH
Walk-in Room Available Constant Temperature and Humidity Test chamber Applicable range Walk-in Room Available Constant Temperature and Humidity Test chamber are applicable for testing the performance indexes of aeronautic & astronautic products,ships,weapon, accdemies, motorcycle, information electronics,instruments & meters, materials, electronic engineering, electronic products, various electronic elements, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, materials, plastics, medical and so on in high-low temperature and humidity alternation environment. Features(Walk-in Room Available Constant Temperature and Humidity Test chamber)
