The cross-rail ferry transporter consists of two parts. The upper car usually powered by battery, Used to transport goods, and the upper car can be equipped with a V-shaped bracket, a lifting platform etc . The under car is can be powered by batteryã??cable drumã??rail power, Designed to run underground, with rails on the deck for connecting to other rails in the workshop, so the upper deck can travel on multiple different parallel tracks. The crossing rails ferry transporter enables fast and precision transitions between parallel tracks, and one transfer vehicle can accommodate parallel transitions of multiple vehicles. The two cars have independent control systems, both wired and wireless remote control can also be installed with PLC. It is more convenient and economical than the turntable platform.
Supplier: Rail clamps
Supplier: Welded Wire Mesh Fence, Chain Link Fence, File Fence, Power Stations Fence, Construction Fence, Security Fence Etc Fence Products, Wire Mesh Container, Roll Cage Trolley, Pallet Tainer Etc Warehouse Products, Solar Mounting System And Pv Mounting Structure
Operational Principle Of Industry Material Transfer Trolley When the industry material transfer trolley moves, the cable pulls behind the industry material transfer trolley. The cable is connected to the ground at one end, while the other is powered by an electric control box on industry material transfer trolley, and then provide the power to the engine. The industry material transfer trolley conduct AC 380V directly into the electrical control system of the trolley to let it start, stop, go forward and backward and so on. The Components Of Industry Material Transfer Trolley
Aluminum airport trolley 1) aluminum alloy airport trolley (with cable brake) 2) length: 970mm 3) front width: 380mm 4) back width: 670mm 5) height: 995mm 6) wheel diameter: 180mm 7) loading capacity: max. 200kg 8) trolley weight: 18kg 9) large ads board size: 525 x 325mm 10) small ads board size: A) front: 100 x 480mm B) back: 120 x 480mm 11) material: aluminium 6063
Product Introduction The automated slab transfer trolley is powered by towed cable, it is used to transfer material in factory. The specific funcations can be customized according customer's demands. Working Principle When the slab transfer trolley moves, the cable pulls behind the trolley. The cable is connected to the ground at one end, while the other is powered by an electric control box on transfer trolley, and then provide the power to the engine. The slab transfer trolley conduct AC 380V directly into the electrical control system of the trolley to let it start, stop, go forward and backward and so on. Customized Options Deck Railings Wood Decking Material Screw-Jack Lift Deck Paint Color (customer specified) Rail Guides Floor Rail End Stops Urethane Wheels (not available on guided carts) Live Axle
Brief Introduction Of Motorized Rail Flat Trolley About this series motorized rail flat trolley, it is an electric transfer flat trolley running on rails which is powered by dragging cable. It conducts AC 380v directly into the electrical control system of the motorized rail flat trolley to let it start, stop, go forward and backward and so on. The dragging cable is laid on the ground. The cable line is place between the tow rails. The operated system is low voltage 36v power. The hydraulic lifting device can be installed on the motorized rail flat trolley. Features Of Motorized Rail Flat Trolley Compared with KPX(battery power) series trolley, the using time of motorized rail flat trolley is unlimited. Compare with KPD(conductor rails power) series trolley, the motorized rail flat trolley have no strict requirement on the rails. Compared with KPJ(cable reels power) trolley, the cost of the motorized rail flat trolley is lower. Advantages Of Motorized Rail Flat Trolley This series motorized rail flat trolley is suitable to be used in the bad environment, for example, high-tempeture and anti-explosion condition; AC motor, simple structure, not limited for the using time; It has no strict requirement on the rail's installation; Cost is not high, easy to operate and maintenance; The motorized rail flat trolley is customized as per your true demand.
Product Introduction The mold transport trolley is designed for mold handling. The mold transport trolley is powered by mobile cable. Depending on the size of the mold, you can choose the size and load capacity of the mold transport trolley. Working Principle When the mold transport trolley moves, the cable pulls behind the mold transport trolley. The cable is connected to the ground at one end, while the other is powered by an electric control box on mold transport trolley, and then provide the power to the engine. The mold transport trolley conduct AC 380V directly into the electrical control system of the mold transport trolley to let it start, stop, go forward and backward and so on. Operation Method The mold transport trolley can be equipped with two kinds of operating handles and remote control. The length of the handle is generally 3meter or 5m, there are four keys and a joystick, the four keys are: start, emergency stop, forward and backward, the joystick controls the steering of the mold transport trolley. Move the joystick to the left, the mold transport trolley to the left, move the rocker to the right, and the mold transport trolley to the right (the direction of the motor is the direction of going forward). If make the cart stop, release the forward or back button or press the stop button. If want to start again, turn emergency stop clockwise, press start. The remote control is a six-button control, including start, stop, go forward, backward, left and right turn. When turning left or right, you must press the corresponding direction key at the same time. When you start again, press the start button directly. Now, what's more, the operating handle and the remote control cannot control the mold transport trolley at the same time (the control box has a switcher with operating handle and remote switch). There are a handle-placed box in the trolley for convenient placement.
MG model double beam gantry crane with hooks is applied in outside plant or railway sideways to conduct common lifting and loading unloading works. This double beam gantry crane is composed of two beams, four support legs, crane travelling systems, trolley and electric equipment. The frame of beams and legs adopts box-type welding mechanism. The crane travelling mechanism adopts separate drive. All mechanisms are operated in the driver's cabin. Power supply of crane adopts cables and sliding wires, select one when ordering. The MG model gantry crane is heavy duty type crane, the duty grade are A3~A6, the capacity from 5t to 250t, the span from 7.5m to 35m, the standard lifting height are 6m, 9m and 12m, the temperature of working environment within -20~+42 degree.
