Automatic Stacker

Automatic Stacker available breadth: 1400-2200mm Specification: Frequency conversion motor auto down stacker Applicable to be production line whose max speed is 180m/min Max sheet length: 3500mm, max stacking height: 1500mm Connected with production management system, it can read order and change order, which make the orders apart correct and fast. it also can work by itself Stacking of multi orders Conveyer belt was separated to be 4 sections, driven by ac frequency conversion motor, running synchronized with the production line, it brings the suitable stack proportion according to the sheet length, which make paper board stack in good order Transducer control the frequency conversion motor to drive the roller running speed up and down stably, board come out easily hard to be overturn Transducer control the brake motor to drive the elevator with counterbalance speed up and down stably, speed counterchanges reasonably, make stacking more free and get rid of the paper board crease, improved the life of machine Rolls forms close, and lift with elevator, to reduce the waste Gross power: 30kw

Automatic Stacker available breadth: 1400-2200mm Specification: Frequency conversion motor auto down stacker Applicable to be production line whose max speed is 180m/min Max sheet length: 3500mm, max stacking height: 1500mm Connected with production management system, it can read order and change order, which make the orders apart correct and fast. it also can work by itself Stacking of multi orders Conveyer belt was separated to be 4 sections, driven by ac frequency conversion motor, running synchronized with the production line, it brings the suitable stack proportion according to the sheet length, which make paper board stack in good order Transducer control the frequency conversion motor to drive the roller runningï¼?speed up and down stably, board come out easilyï¼?hard to be overturn Transducer control the brake motor to drive the elevatorï¼?with counterbalanceï¼?speed up and down stably, speed counterchanges reasonably, make stacking more free and get rid of the paper board crease, improved the life of machine Rolls forms close, and lift with elevator, to reduce the waste

Product introduction: 1.This equipment is used to collect bare PCBs at the end of SMT production line 2.Stable and reliable PLC control system; 3.Easy to operate LED touch screen control interface; 4.Uninterrupted loading; 5.Machine always fault monitoring; 6.Optional pass working mode; 7.Smooth and parallel width adjustment(Stainless steel leadscrew); 8.Small volume design for space saving; 9.SMEMA port is compatible; Technical parameters Function This equipment is used to collect bare PCBs at the end of SMT production line PCB thickness Min0.6mm MAX PCBs capacity 300pcs(0.6mm thickness PCB) Cycling time Approx 8 seconds Transport direction Left to right/right to left(optional) Transport height 900±20mm(or customized) Air pressure 4-6 bar, MAX10L/minute Power supply 100-230V AC(customized) single phase, MAX 300V/A If you want more information ,feel free to contact us .Email :monica@szhonreal.com ,

Supplier: Corrugator belt, corrugating roll, spray humidifier, roll stand, cassette single facer, auto splicer, gluer machine, automatic stacker, NC cut-off machine, slitter blades
Services: Clearing agent, transportation, shipping
Buyer: Packaging machinery

Description: Hydraulic Mill Roll Stand//Corrugated Cardboard Mill Roll Stand/Paperboard Mill Roll Stand: Symmetrical structure, can carry two craft paper at one time, which can work without brake. Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic pressure. feeding craft / reel paper quickly. Function Of Mill Roll Stand: *Each arm setup four directions button, it is easy to operate *It can be loading two paper rolls at the same time, without stopping the machine for changing paper roll *The whole machine uses 6 cylinders fully hydraulic controlled, hydraulic control arm lift and down, clamping and open, left and right moving *Tension control: multipoint pneumatic brakes, brakes good performance, loses heat fast *The chuck adopts inner expansion type or teeth type, reduce the destruction of the paper core. saving paper. Electric Mill Roll Stand Product Parameters: Max. Working Width 1000mm-1800mm Min. Working Width 700mm Max. Paper Mill Dia 1500mm Maximum paper diameter 1400mm Max. Supporting Weight (One side) �  �  �  �  �  �  �  �  �  �  �  �  �  2T Hydraulic Mill Roll Stand Hydraulic Mill Roll Stand//Corrugated Cardboard Mill Roll Stand/Paperboard Mill Roll Stand :Symmetrical structure, can carry two craft paper at one time, which can work without brake. Reel paper lift-lower, clamp, loosen, movement, contraposition operated by hydraulic� pressure. feeding craft / reel paper quickly. Product Parameters:�  Mill Roll Stand Parameters Maximum Paper Roll Diameter �?1500mm Effective Width 900mm-2200mm Maximum Support Weight 3t Main Axis �?242mm Pneumatic Source Pressure(Mpa) 0.4---0.8Mpa Magnetic Valve Voltage 380V 50HZ Working Pressure(mpa) 16-18mpa Mill Roll Stand Characteristics The Structure is Double Rotary Shafts with Four Arms Support Two Paper Mill Rolls on both Arms at the Same Time Hydraulic Control for Paper Mill Roller Up-down, Clamp-open and Centering Web Tension Controlled by Pneumatic Brake or Manual Brake Tapered Center, Stretch Center and Springiness Chucks are Optional

NC cut off machine vailable breadth: 1400-2200mm Specification: 1.Max machine speed: 200m/min, when cutting length is 0.5m speed is 100m/min 2.Cutting length: 500mm-9999mm, cutting accuracy1mm 3.Up to 999 job size can be preset, auto change job size without machine stop, connected with the computer to make production management easy 4.All drive gear made of high quality alloy steel, which are heat treated and exactitude processed, high drive accuracy and long life 5.Circulating lubrication to insure lubricate and also help to clean and cool 6.Paper entering and out are separated, each have their frequency convert motor to control speed, synchronized driven, stable and low noise 7.Double-row round wheels are used at entrance to reduce the cutting errors caused by dithering of paper board. 8.Exit and sending platform use round wheels and conveyer belt, which make paper board ejection steady. 9.Round wheels device pneumatic controlled, special design, easy to operate 10.Pedestal and wheel box made of grey cast iron, good steel and good shake-resistance 11.AC servo-control system energy save above 30% 12.Motor main motor: 37kw/55kw oil pump motor: 0.2kw convey motor: 2.2kw

Product Description Gluer Machine Applicable Paper Width: 1,400-2,300 mm Configuration: 1. The designed maximum operating speed is 220 m/min; 2. The glue roller and meter roller adopt modular and built-in design, they can be installed and removed from the operation side to facilitate repair and maintenance; 3. A pressure arm locking mechanism is provided to ensure stable and reliable operation performance of paper pressing roller (touch pressing plate) under high-speed operation state; 4. The gap between the glue roller and the meter roller can be automatically adjusted according to the speed, paper material and flute type; 5. The touch pressing mechanism for glue application is a paper pressing roller, and the gap between the paper pressing roller and the glue roller can be adjusted electrically to facilitate rapid changeover for processing cardboards with different flute types; 6. The glue pan is lifted pneumatically to facilitate cleaning. There are glue blocking plates installed at both ends of the glue pan to well prevent glue from splashing from the shaft ends during high-speed operation of the glue roller and meter roller; 7. Layered independent frequency conversion motor, synchronous belt transmission and relatively independent control are used in the power part to ensure the precision of transmission and to greatly reduce the vibration and noise during operation; 8. Layered independent adjustment and touch panel man-machine interface control are employed, so the adjustment and control are more flexible and directviewing; 9. The floating roller of the pre-heating cylinder is electrically adjustable (this function is optional to users) to facilitate paper passing through and adjustment of angle of contact. GLD6A glue applying machine for 2-layer corrugated cardboard. Paper Width External Dimensions Weight (T) Whole Machine Power

Product Description The Auto Splicer functions as a central element for smooth, continuous operation, fast and helps to increase production output and saving production cost during the corrugated cardboard production process. Auto Corrugated Plant Automatic Splicer Function: 1. No paper tail connecting, reduce the loss of the base paper (the overlap of the base paper about 40mm width). 2. When the paper truck remove, automatically transferred out,vacuum-adsorbed, easy to operate, and fully automatictension control, paper-connecting zero error. 3. All adopt PLC automatic control. 4. When the buffer wheel pull for the first time, it's easy to pull and aligned automatically. 5. Collecting paper controlled by cylinder, will not cause the broken tile and blistering problem. Design speed: Model 300-280 m/min(Flute liner)250m/min(Top liner) Model 400-380 m/min(Flute liner)250m/min(Top liner) Paper Connection: overlap connecting Design width: the maximum paper width can reach 2550mm Weight of the original paper: 50g/m2~350g/m2 Paper reaction completion time: about 1 second Gas source: a minimum of 0.6MPa dry clean air source Power demand: power supply:380V, 50Hz, 20A control power:12V,24V Paper frame brake: pneumatic brake/ magnetic powder brake