MouldTech Impact Bars are designed to absorb impact at the loading points of Conveyor Belts, where a combination of high energy absorption and low friction is needed. Due to ease of installation, these Impact Bars replace the conventional idler sets. The top cover is made of Ultra High Molecular Weight Polyethylene, which gives these Impact Bars a very low friction top surface. The middle portion is high-quality energy-absorbing rubber, which acts as a shock absorber at the loading zones of conveyor installation. These Impact Bars are also available with tapered ends on one side or on both sides to prevent any damage to the conveyor belt. MouldTech Impact Bars can be fitted with T Bolt. A fastening system also makes the element adaptable to any cradle arrangement, which the conveyor installation might have. The Impact Bars come in standard lengths of 1220mm, 1500mm and 1524mm with the top cover of UHMWPE and are supplied with 8 bolts and Nylock nuts as a standard accessory. S
Maximum Noise Absorption, Wear Resistant, and Friendly to Belt Impact roller is installed below the drop material section of the conveyor to reduce the impact of the falling material on the conveyor belt to extend the service life of the conveyor belt. BuMtesD impact roller is specially suitable for mining application, which is an effective way to reduce a sudden and large load capacity, friendly to the rollers under the impacting zone.
Supplier: Conveyor impact bar, conveyor impact bed, conveyor belt cleaner, conveyor ceramic wear liner, conveyor skirt board, PU products for conveyor system, conveyor pulley lagging
Conveyor Idlers Tough Belt Training Idlers Toughing Idlers Carrying Idlers Self Allign Carrying Idlers Self Allign Return Idlers Impact Idlers Tough Belt Rubber Cushion Idlers Return Idlers Return Impact Idlers Conveyor Drum Pulleys Rubber Lagged Pulleys Head Pulleys Snub Pulleys Wing Pulleys
We have a variety of belt conveyor roller:carrying conveyor roller, impact conveyor roller , return conveyor roller , nylon conveyor roller, training conveyor roller, .
Diameter: 50-219mm. Length: 150-3500mm. Lifetime: at least 30, 000 hours. Type conveyor: dtii, dtii (a), td75. Minimum ordered quantity: 5 pcs. Certification: iso 9001:2000 etc. Port of loading: tianjin port Payment terms: lc, tt, western union. Standard wooden box or as per requested
--Carrying Roller --Return Roller --Impact Roller --Comb Roller --Rubber sprial return roller --Conveyor Roller set --Conveyor Roller Frames --Conveyor pulley --Pulley lagging
EP/ NylonConveyor belt Chevron Conveyor Belt Heat Resistant Conveyor Belt Oil Resistant Conveyor Belt Fire Resistant conveyor belt Sidewall Conveyor Belt Super big width Conveyor Belt (up to 6000mm) Rough Top Conveyor Belt Bare Cover Conveyor Belt Steel Cord Conveyor Belt Rubber Sheet
1.The pu blade body takes shape, keeps the proper contact pressure with the belt through the spring and achieves scraping effection . 2.With elastomer blade, higher strength, wear-resisting, no belt damage. 3.Thanks to the modular design, screw adjuster and shock-resistance spring can absorb the external force instantly and performs effective scraping function without any belt damage. 4.Suitable for each material, such as coal mine, sinter plants, salt plants, iron ore plants, fertilizer plants, etc. As per customer's request
Secondary Automatic Return belt Cleaner 1. The tungsten carbide blade with higher wear resistance and longer service life has a good scraping effect on high temperature or sticky materials. 2. Combined design of the blade makes installation and maintenance easy. Each blade equipped with an automatic returning device, and superior for its good noise absorption, vibration relief and tensioning. When the conveyor belt uneven surface, such as vulcanization joints, belt buckles and belt repair surface, passes through the blades, the blades in contact with will subject to a certain pressure from the conveyor belt uneven surface, ejects and evades slightly to the opposite direction of the conveyor belt to protect the conveyor belt. After the conveyor uneven surface passed, the evading blade can get the rebound tension through the automatic returning device, make the blade reattached to the conveyor belt surface to continue to work. 3. The spring adjusting seat design prevent the whole blade set from damaging by instantaneous impacts, and make it easy to install and adjustment. 4. Installed on the working surface of the return conveyor belt at the lower part of the head pulley, suitable for two-way running belt. 5. Suitable for the conveyance of all kinds of materials, such as coal, coke, sinter, salt, iron ore and fertilizer, and widely applied in thermal power plants, iron and steel plants, cement plants, fertilizer plants, coking plants, coal cleaning plants, coal mines, petrochemical plants, mining, paper mills, chemical plants, terminal transfer stations and other industries.
