Titanium Felt

Product Introduction Sintered titanium felt is a kind of porous material created from tiny titanium fibers that have been flattened down and annealed to provide a smooth, flat surface ideal for use in a variety of industrial applications. This unique material has a range of features that make it ideal for use in a wide range of applications. In the production of hydrogen and fuel cells, sintered titanium felt is used as a Liquid/Gas Diffusion Layer (LGDL) in stacks, where it helps to distribute the reactant gases and provide electrical contact between the catalyst layer and the bipolar plate or current collector assembly. The material´s high corrosion resistance, even under highly acidic and humid conditions, makes it an ideal material for use in these applications. Parameters Material: Titanium Size: 1500 1200mm Fiber size: 20 microns-40 microns Thickness: 0.20mm, 0.25mm, 0.40mm, 0.60mm Porosity: 60%-75% Porosity and size can be customized. Features Porous structure: Sintered titanium fiber felt has an excellent porous structure, which provides high filtration efficiency and large dirt holding capacity. Thermal conductivity: The material has strong thermal conductivity, making it an ideal material for use in high-temperature applications. Precisionandaperture control:Sintered titanium fiber felthas precise precision and aperture control, which makes it suitable for use in applications where precise filtration is necessary. Corrosion resistance: The material has high corrosion resistance, even under highly acidic and humid conditions, making it ideal for use inharsh environments.

Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis. Parameters: Material: Titanium Size:1500*1200mm Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm. Porosity:60% - 75% â?» Porosity and Size can be customized. Technological Process Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL Features: 1. Three-dimensional grid porous structureï¼? 2. Strong corrosion resistanceï¼? 3. Optimal electrolysis performanceï¼? 4. High porosity and current densityï¼? 5. Uniform pore size distribution. Applicantion 1. Liquid/gas diffusion layer; 2. Hydrogen absorber; 3. Hydrogen-rich water dispenser; 4. Diffusion layer of hydrogen cell stack; 5. PEM hydrogen production by water electrolysis.

Sintered titanium felt is a kind of porous material created from tiny titanium fibers that have been flattened down and annealed to provide a smooth, flat surface ideal for use in a variety of industrial applications. This unique material has a range of features that make it ideal for use in a wide range of applications. In the production of hydrogen and fuel cells, sintered titanium felt is used as a Liquid/Gas Diffusion Layer (LGDL) in stacks, where it helps to distribute the reactant gases and provide electrical contact between the catalyst layer and the bipolar plate or current collector assembly. The material's high corrosion resistance, even under highly acidic and humid conditions, makes it an ideal material for use in these applications. Parameters Material: Titanium Size: 1500 1200mm Fiber size: 20 microns-40 microns Thickness: 0.20mm, 0.25mm, 0.40mm, 0.60mm Porosity: 60%-75% Porosity and size can be customized. Features Porous structure: Sintered titanium fiber felt has an excellent porous structure, which provides high filtration efficiency and large dirt holding capacity. Thermal conductivity: The material has strong thermal conductivity, making it an ideal material for use in high-temperature applications. Precision and aperture control: Sintered titanium fiber felt has precise precision and aperture control, which makes it suitable for use in applications where precise filtration is necessary. Corrosion resistance: The material has high corrosion resistance, even under highly acidic and humid conditions, making it ideal for use in harsh environments. Applications Hydrogen and fuel cells: Sintered titanium fiber felt is used as a diffusion medium, such as Liquid/Gas Diffusion Layer (LGDL) in cathode-fed electrolyzers, where it helps to distribute reactant gases and provide electrical contact between the catalyst layer and the bipolar plate or current collector assembly. Chemical and pharmaceutical industries: Sintered titanium fiber felt is used as a filtration medium, where its high filtration efficiency and precise aperture control are essential in ensuring the purity and quality of the final product. Aerospace and automotive industries: Sintered titanium fiber felt is used in heat exchangers and other high-temperature applications where its strong thermal conductivity and excellent mechanical properties are essential. Water treatment: Sintered titanium fiber felt is used in water treatment applications, such as in wastewater treatment plants and desalination plants, where it helps remove impurities and contaminants from the water.

Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis. Parameters: Material: Titanium Size:1500*1200mm Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm. Porosity:60% - 75% â?» Porosity and Size can be customized. Technological Process Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL Features: 1. Three-dimensional grid porous structureï¼? 2. Strong corrosion resistanceï¼? 3. Optimal electrolysis performanceï¼? 4. High porosity and current densityï¼? 5. Uniform pore size distribution. Applicantion 1. Liquid/gas diffusion layer; 2. Hydrogen absorber; 3. Hydrogen-rich water dispenser; 4. Diffusion layer of hydrogen cell stack; 5. PEM hydrogen production by water electrolysis.

Product Introduction Pure Titanium Electrode Porous Fiber Felts, also known as ti felts or ti fiber felts, are commonly used in electrolyzer stacks as the diffusion layer or flow field material on the oxygen (anode) side. Unlike carbon-based gas diffusion layers that cannot be used at the oxygen evolution electrode due to immediate oxidation, titanium fiber felt is an ideal diffusion medium that provides electrical contact between the anode catalyst layer and bipolar plate or current collector component. Its unique properties, including high porosity and uniform pore size distribution, enable efficient gas transport and water management within the cell, enhancing the overall efficiency of the electrolysis process. Overall, the use of titanium fiber felt in electrolyzer stacks improves their durability, reliability, and efficiency in hydrogen production. Parameter Material: pure titanium fiber Max Size: 1000x1000mm Other Size: 200x200mm, 205x205mm, 300x300mm, 305x305mm or customized Porosity: 60%-80% Thickness: 0.25-2mm Features 1. Uniform pore size distribution: Titanium fiber felt´s consistent pore size distribution ensures efficient filtration and separation processes, providing reliable filtration performance. 2. Strong corrosion resistance: Titanium fiber felt´s exceptional corrosion resistance makes it suitable for harsh environments and ensures reliable performance in applications requiring durability and longevity. 3. Good water permeability: Titanium fiber felt´s good water permeability makes it useful for water filtration and wastewater treatment applications, providing clean and safe water for various applications. 4. High porosity: Titanium fiber felt´s high porosity enables high gas and liquid flow rates, allowing for efficient heat transfer and suitable for thermal management applications. 5. Good heat dissipation: Titanium fiber felts excellent heat dissipation properties make it ideal for high-temperature environments, ensuring stable performance and long-term durability.

Platinized titanium felt is a specialist material frequently utilized as a flow field or diffuser material in electrolyzer stacks and single cells, particularly on the oxygen (anode) side. This material is made by depositing a thin layer of platinum onto flattened titanium fibers that have been compressed and annealed to create a smooth, flat surface suitable for use in electrolyzers. Platinum coating thickness: 0.5 micron or customized Substrate: titanium fiber felt Felt thickness: 0.2-5.0mm Porosity: 60%-80% Fiber diameter: 10~100 microns Features High electrocatalytic activity: Platinum is known for its high electrocatalytic activity, particularly for the oxygen reduction reaction. When deposited on a titanium felt substrate, platinum forms a highly porous material with a large surface area, providing ample space for electrochemical reactions to occur. High durability: Platinized titanium felt is highly resistant to corrosion and can withstand harsh operating conditions, making it ideal for use in a variety of industrial and scientific applications. Applications Platinized titanium felt is used as an anode material in the production of chlorine and caustic soda in the The platinum coating on the titanium substrate prevents the formation of a passivating oxide layer on the anode surface, ensuring high electrochemical performance and durability. Electrowinning: Platinized titanium felt is used as an electrode material in the electrowinning of metals such as copper, zinc, and lead. The platinum coating on the titanium substrate provides excellent electrical conductivity and corrosion resistance, making it an ideal electrode material. Electrosynthesis: Platinized titanium felt is used as a catalyst support in electrosynthesis reactions, such as the production of organic compounds and fine chemicals. The platinum coating on the titanium substrate enhances the catalytic activity of the supported catalyst, leading to higher yields and selectivity. Electrolytic capacitors: Platinized titanium felt is used as an electrode material in high-performance electrolytic capacitors. The platinum coating on the titanium substrate provides excellent electrical conductivity and corrosion resistance, ensuring high performance and long-term reliability. Water treatment: Platinized titanium felt is used as an electrode material in electrochemical water treatment systems, such as electrocoagulation and electrooxidation. The platinum coating on the titanium substrate enhances the electrochemical performance of the electrode, leading to effective water treatment and disinfection.

Titanium felt is a soft material made of pure titanium fibers, which can be used in electrolytic cells as an electrode. The process is that the titanium wire is made into micron-scale fibers through a special process, and the titanium fibers are laid and sintered to make porous materials. Its unique three-dimensional network fibers and fully connected pore structure make it have a series of special functions. In the application of hydrogen production, under the condition of normal pressure of 60 , titanium felt has the best electrolytic performance, the most suitable pore size, the best air permeability and porosity. The test data show that titanium felt is better than titanium plate and carbon paper.

Titanium felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell and hydrogen production by water electrolysis. Parameters: Material: Titanium Size:1500*1200mm Thickness:0.2mm, 0.25mm, 0.40mm, 0.60mm, 0.80mm, 1.00mm, 2.0mm. Porosity:60% - 75% â?» Porosity and Size can be customized. Technological Process Pure titanium (special process)-titanium fiber (laying, sintering)-titanium fiber felt (with three-dimensional network porous structure)- Titanium felt for LGDL Features: 1. Three-dimensional grid porous structureï¼? 2. Strong corrosion resistanceï¼? 3. Optimal electrolysis performanceï¼? 4. High porosity and current densityï¼? 5. Uniform pore size distribution. Applicantion 1. Liquid/gas diffusion layer; 2. Hydrogen absorber; 3. Hydrogen-rich water dispenser; 4. Diffusion layer of hydrogen cell stack; 5. PEM hydrogen production by water electrolysis.

Dia 40mm titanium fiber felt is made by a special laying process and a special ultra-high temperature vacuum sintering process. Compared with titanium powder sintered plate, Ti fiber felt has an excellent three-dimensional network, porous structure, high porosity, large surface area, uniform pore size distribution, special pressure, and corrosion resistance, and can be rolled and processed. Titanium fiber felts are widely used in military, aerospace, civil, medical care, and other industries abroad. Titanium fiber felts are primarily used in electrolyzer stacks as the flow field or diffuser material, particularly on the oxygen (anode) side. Features: has an excellent three-dimensional network porous structure; high porosity, several times larger surface area; uniform pore size distribution, strong corrosion resistance, good water permeability; high porosity, and heat dissipation; good performance, high current density, low voltage, stable performance, long life, and so on. Parameters Color: Light grey Dimension: Customized as request Thickness:0.2mm-2mm Often made thickness (0.25,0.4,0.6,0.8mm) Porosity:30-50%