JS waterproof coating is a two-component waterproof coating composed of organic polymer emulsion (such as acrylate emulsion and various additives) and inorganic powder (such as cement, quartz powder, etc.).
Waterproofing coating
Yuhong Brand HCA-102 Acrylic Roofing Waterproof Coating is processed with 100% pure acrylic elastic emulsion as base material, mixed with high-grade pigment and varieties of carefully-chosen accessory ingredients. The product is excellent flexibility, bonding power and anti-ultraviolet radiation performance and applies to directly-exposed roofing waterproof project. Features 100% pure acrylic elastic emulsion is base material. Outstanding outdoor durability and anti-ultraviolet radiation. Outstanding cohesiveness, applicable to steel structure base, cement mortar or concrete base, etc. Durable low-temperature flexibility, crack-free bending under -30; low temperature. Excellent elasticity. Environmental water paint, pollution free. Liquid state, cold process, safe and easy. Application Range; Apply to directly exposed roofing waterproof project. Conformation Points; Waterproof base: steel structure base, cement mortar or concrete base, internal and external angles should be in the form of circular arch, internal angle diameter should be bigger than 50mm, external angle diameter bigger than 10mm. For base cracks and grooves at the pipe end, sealing material should be filled and addition waterproof treatment should be made. Film-coated waterproof layer: in case of multi-coating protection, thickness of each film coating should not be smaller than 1.5mm; for one-coating protection, thickness should not be smaller than 2mm. It can be separate film-coated waterproof conformation, and a layer of base reinforcement material can also be added according to actual engineering situation or design requirements. Attention for construction; Appropriate construction temperature is between, construction is not suitable in rainy days or there is water on the base. Before hard dying of the film coating, waling on the waterproof layer is strictly forbidden, and protect it from damages.
Waterborne Polyurethane waterproof coating Polyurethane waterproof coatings can be divided into one-component and two-component. One-component polyurethane waterproof coating, also known as moisture-curing polyurethane waterproof coating, is a reactive moisture-curing film-forming waterproof coating. It is applied to the waterproof base layer during use and is cured to cross link into a tough, soft and seamless rubber waterproofing membrane by reacting with moisture in the air. High-strength polyurethane waterproof coating is a two-component reactive curing waterproof coating. High-strength polyurethane waterproof coating Two-component chemical reaction-cured isocyanate-terminated prepolymer obtained by polycondensation of polyether and acid. Component B is composed of plasticizer, curing agent, thickener, accelerator, and filler. Composition of colored liquids. When used, the two components of A and B are uniformly mixed in proportion, coated on the surface of the waterproof base layer, and often cured by temperature cross linking to form a rubber elastic film with high elasticity, high strength and durability, thereby waterproofing. The waterborne polyurethane waterproof coating generally refers to the one-component polyurethane waterproof coating, and the oily refers to the two-component polyurethane waterproof coating; in comparison, the water performance is almost the same, the price is also cheaper, the most important thing to look at the use environment! However, waterborne polyurethane waterproof coatings are more environmentally friendly.
As two-component polymer water-borne waterproofing coating, it uses high quality polymer emulsion and cement as main raw materials with various inorganic materials and auxiliaries.. Advantage: 1. Strong adhesion. 2. Strong water resistance. 3. Excellent crack resistance. 4. Suitable for multiple environments. 5. Eco friendly. Application: Roof, wall, kitchen, bathroom, balcony, terrace and other non-exposed waterproofing projects. Reference dosage: 1.0-1.4kg/sqm for 1mm coating Specification: 25kg/barrel (emulsion) & 20kg/bag (powder)
Environmental protection products, water-based tasteless, convenient construction, wide range of application, the construction of complex parts has obvious advantages. After curing the formation of non-joint, complete elastic waterproof layer, improve the waterproof and impermeability of construction engineering, is rolls material. Itâ??s impossible to reach the product. The film has high strength and elongation, and has strong adaptability to cracking or expansion of the base. The maintenance is convenient, only to the damaged part partial maintenance, still can achieve the original waterproof effect. This product has bright color, can play the role of decoration and beautification, the moisture content of the base is not strict, wet base surface can be constructed.
One-component polyurethane waterproof coating is a kind of reactive curing film-forming polymer waterproof coating.It is made up of isocyanate and polyether as main raw materials, mixed with various additives such as solidifying agent and plasticizer, and is dehydrated and polymerized by high temperature. sherry@henanjax.com
One-component polyurethane waterproof coating, also known as moisture-curing polyurethane waterproof coating, is a reactive moisture-curing film-forming waterproof coating. When used, it is coated on the waterproof base layer, and cured and cross-linked into a tough, soft and seamless rubber waterproof membrane by reacting with the moisture in the air.
Premium quality water-based Acrylic waterproofing coatings (white/grey color). Other colors also available on request. Supply from Jebel Ali Port thru UAE based manufacturer. Available in 20Kg Pail. Supply in customer's packing/design possible subject to minimum order quantity.
Product Description : Yuhong SPU-301 one component polyurethane waterproofing coating is a kind of coating made by polymerization of isocyanate and polyether polyols, with addition of a variety of aids and fillers. It is applied on substrates to form a firm, soft, seamless sealing film by chemical reaction through, CNCO end group contacted with moisture in air. Features; It has one component which is easy to apply. The different types fits different applications. It hasstrong adhesion, high strength and elongation, good elasticity, good high temperature and low temperature resistance, which make it fit to shrinkage and crack of substrates. It has no benzene or coal tar, so it makes no pollution to environment. Application Range; It could be widely used in all kinds of moisture-resist and waterproofing projects, such as underground project, swimming pools, bathroom, balcony, parking lot and kitchen, as well as for non-exposed roof. Construction Method; Application Process: application preparation; substrate treatment and clean; additional waterproofing for details; application for roof; sealing of end joints and edge;application of protection or separation layers. Substrate treatment: the substrate should be smooth, solid, clean, dry without sharp concave and convex, honeycomb, pocking marks, peeling free of bulge, greasy, apply sealant to concave around pipe root and do additional waterproofing layer in cracks. Additional waterproofing layer: for details, such as concave and convex corners, pipe root, apply additional waterproofing layer, using type II to cracks, coat for 2;4 times(the thickness is about 1mm). Apply waterproofing layer to roof deck: can coat for 2-3 times with scraper, but one coat is allowed too. When the first coat isnt sticky, can apply the second coat, the second coat should be vertical with the first coat. The batter coating rate is 2.0kg/m2for thickness of 1.5mm.
