ZQ Drill Pipe Power Tong is an ideal wellhead tool for oil drilling,widely applied in making-up and breaking-out for well drilling and repairing on offshore and land.Open-throat design of the ZQ series with high mobility allows escaping from drilling pipe freely.The tong is a combination of spinning tong and torque tong.It substitutes cathead,suspension tong and spinning rope in making-up and breaking-out.
ZQ series of drill pipe power tong marked with III are developed types from ZQ203-100 power tong. The power tong can be fixed on the accommodation track for front and back walk. It can pass across the well head and go to the mouse hole for working. Master tong can move upward and downward. Walk and lift of the tong can be remote controlled and automatically handled. Especially suitable for the occation with small wellbay suface.
Zq series drill pipe power tongs are the ideal handing tools for oil drilling, which are widely applied to make up and break out pipes for offshore drilling and land drilling and workover operation. This type of drill power tongs are characterized by safety, laboursaving operation and high efficiency. They are designed and manufactured according to api spec 7k.
ZQ Drill Pipe Power Tong is an ideal wellhead tool for oil drilling,widely applied in madding-up and breaking-out for well drilling and repairing on offshore and land.Ppen-throat design of the ZQ-series with high mobility allows escaping from drilling pipe freely .The tong is a combination of spinning tong and torque tong .It substitutes cathead,suspension tong and spinning rope in making-up and breaking-out.The Tongs are designed and manufactured according to API Spec7kSpecification for Drilling Equipment.
1,The tong head is the open structure position, and the integral tong head has good hardness and rigidity; 2,The three-jaw-plate clamping device is adopted in the master tong and back tongs. The front two jaw plates of the master tong are in the swing structure and the back jaw plate is the roller-climbing structure. 3,Four-gear rotation is adopted for large speed regulation range. 4,It has the braking mode with braking staple. The braking torque is large. The operation is simple. And it is convenient for repair and replacement; 5,With the open large gear supporting structure, hardness and rigidity of open large gear is enhanced considerably; 6,The shell is made of steel plate with high hardness. 7,Hydraulic torque indicator is provided. And installation interface of turning torque instrument is provided for computerized management.
Brand new Hydraulic Break out Tong can disconnect drill pipe from 42mm-127mm. Adopt hydraulic to economize on manpower and improve working efficiency. -
Hydraulic tubing pliers (power pliers) XYQ12A Jaw plate assembly 12.Z-01.9 dryer AD-2 TESCO 500ECI 900HP component 730585 PliersBK-2-6C 1.07.17.001 Shaft end stop 0903JG25050008 Dust cover oil seal GX-1/700*1050/200 mesh Derrick plane screen brake lever operating mechanism TK01-01 �¡�?�¾�¿�¾�? �?�?�?�°�³�° �¾�³�?�°�½�¸�?�¸�?�µ�»�? �½�°�³�?�?�·�º�¸ 9734-00 Shockproof pressure gauge YN60-I Connecting rod 2133190main regulator spring1 6839209 Inclinometer LHE type self-floating electronic single-point inclinometer special printing paper LHE-3013 Water and gas instrumentation AF700208-050100 DQ70BSC BA2 mouth hose assembly F381CFCF1515 CS10-RA-630-IC piston ring 1W-8922crankshaft E3TZ-6V303-CRM P9840518AA Side brace Weight gauge ZJ laminated glass JZ series sensitive 4.10.13.005 Hexagon slotted nuts Control circuit board FYB-475 Bushing ZJ50 BK-3-7B1 �¡�?�¾�¿�¾�?�½�°�? �³�°�¹�º�° M39�?3-6H T57-3005.0 1.18.05.131 On the eye clip Scalping Screen x 3,� 30,SCREEN, SCALPING� 40,45 MESH,TYPE,63727FMSD040 cardan shaft\ZJ30 L=870 2.4.51.003 O-seal ZCS-10*100 cyclone assembly Friction plate 515899 50024-28-C5D SCREW, CAP-HEX HD DRILLED TDS 35*35 BOP FZ35*35RS locking shaft RJ11172.10 Versatile puller 115MMFOR14-P-220 Start valve block 2.2.03.001 pitot tube 23046479filter element 477556 Normally open brake WG05211110 2.4.34.016 Pipe Fittings cross-over sub handleuniversal IDM JOY1000560-00 Explosion-proof electric pan/tilt YTY-A13D1 DC12V one pass filter element 4N0015filter element 20405827 emergency brake valve SH361-3517 B15032 Frame Plate Explosion-proof lights DWN-FBD 40W Rubber stopper 60202-01-01A-04BOP group FILTER AIR (FOR COPPER LTO 350), Part Number: PA 3498 P2000179AA Cylindrical pin Hydraulic cylinder LB010543-00 steering clutch seal ring 6P5317 Baoji Youtai 25YT/GZ 25A 250V single-phase three-pole explosion-proof Boiler KDB-250FA control box insurance 250V 5A~15A oil seal 5300200116 Solid phase content analyzer ZNH-1 BushingF075J04 Mixer and GJC45-21 gas valve gas pipe butt joint 06 type X04-00-060 hydraulic cooler\ZJ40LDB HT-0908 filter element DQ70 IX-160�?80 2.4.03.005 4.10.01.099 Hexagon socket head cap screws SK-2Z16 Drilling parameter instrument installation base SK-2Z11-YB*â?´ Transmission No. 1 transmission shaft ZJ45 sliding sleeve set 106.02.52.00 winch brake operating mechanismZJ50D28Disc brake buffer cylinder hoseA10I-M16*1.5 16 8m faucet flush pipe circlip\ZJ45 104.05.30.04 Inclinometer GE-MWD power cord 450080-3 150GZ-4K quick coupler DQ70BSD 5126050040 Drill pipe power tongs XQ28/1.8 Tong teeth XYQ1.8.Z.1-6 Sensor PT60KLBS suspension load sensor 0008019
Supplier: Oil and gas field, mission centrifugal pumps, api 6a valves, spools, flanges, elevators, slips, manual tongs, power tongs , drilling equipment
Services: Manaufacturing and supplying
Buyer: Oil and gas drilling equipment
1. Main Technical Parameters: (1). Use for product: W-SDS Rotary Slips. Pipe size (in): 2 3/8"~4 1/2". (2). Use for product: W-SDML Rotary Slips. Pipe size (in): 2 3/8"~5 1/2". (3). Use for product: W-SDXL Rotary Slips. Pipe size (in): 3 1/2"~5 1/2". (4). Use for product: 3 1/2~5 Rotary Slips. Pipe size (in): 3 1/2"~5". (5). Use for product: 5~7 Rotary Slips. Pipe size (in): 5"~7". (6). Use for product: W3 1/2"-75 (125) Rotary Slips. Pipe size (in): 2 3/8", 2 7/8", 3 1/2". (7). Use for product: 5-75 (125 200) Rotary Slips. Pipe size (in): 4", 4 1/2", 5". (8). Use for product: DCS-S Drill Collar Slips. Pipe size (in): 3"~4 7/8". (9). Use for product: DCS-R Drill Collar Slips. Pipe size (in): 4 1/2"~7". (10). Use for product: DCS-L Drill Collar Slips. Pipe size (in): 6 3/4"~14". (11). Use for product: WT Drill Collar Slips. Pipe size (in): 4 1/2"~11 3/4". (12). Use for product: 8" Drill Collar Slips. Pipe size (in): 8". (13). Use for product: 9" Drill Collar Slips. Pipe size (in): 9". (14). Use for product: Casing Slips. Pipe size (in): 6 5/8"~30". (15). Use for product: WA-C Safety Clamps. Pipe size (in): 3 1/2"~15 5/8". (16). Use for product: WA-T Safety Clamps. Pipe size (in): 1 1/8"~4 1/2". (17). Use for product: QQ P60-89/585 Pneumatic Spider. Pipe size (in): 2 3/8"~3 1/2". (18). Use for product: QQ P60-89/675 Pneumatic Spider. Pipe size (in): 2 3/8"~3 1/2". (19). Use for product: QQ P60-127/900 Pneumatic Spider. Pipe size (in): 2 3/8"~5". (20). Use for product: Well Repair Manual Tongs. Pipe size (in): 2 3/8"~10 3/4". (21). Use for product: B Manual Tongs. Pipe size (in): 2 3/8"~12 3/4". (22). Use for product: DB Manual Tongs. Pipe size (in): 3 1/2"~17". (23). Use for product: 13 3/8 Casing Manual Tongs. Pipe size (in): 13 3/8". (24). Use for product: Q13 3/8-30 Casing Manual Tongs. Pipe size (in): 13 3/8"~30". (25). Use for product: Tubing and Workover Tongs. Pipe size (in): All size available. (26). Use for product: Drill Power Tongs. Pipe size (in): All size available. 2. Features: (1). The dies made from high-quality alloy steel in our company. (2). The dies are chemically heat-treated for surface hardness. (3). The dies and slip inserts are wear-raciting, corrosion-resistance. (4). Customized products are available. (5). Qualified API certified manufacture.
Tq series of casing tongs are widely used for making up and breaking out pipes or casings. The tong heads are designed open type and can freely clamp and escape from the casing. Casing tongs are safe, realiable and easy to handle with high mobility. They are designed and manfactured according to api spec 7k.
