Wetting Agent

Uni omni Uni Tol 250 (Near by to International Equivalent) Effective in all pigments.Cost Effective,Reduces grind Time and more out Put.Enhances gloss with better flow and color.Effective in very low dosage Uni Tol 270(Near by to International Equivalent) Effective in all pigments.Cost Effective,Reduces grind Time and more out Put.Enhances gloss with better flow and color.Effective in very low dosage. Easy to Handle Bentonite Gellant and eliminates the need polar activator Uni Tol-250- 20 kg HDPE pack/minimum orderof3000$ Uni Tol 270 -20 kg HDPE pack Uni Omni - 20 kg HDPE pack Uni 630 - 20 kg HDPE pack

Supplier: Leather chemical, fabric, raw material, cotton denim fabric, denim, leather wax, emulsion, raw materials, silicon softeners, pigment paste, mating and wetting agents, anionic softeners, carbon black, titanium dioxide, nitro cellulose all grade, fragrance and flavours, natural and synthetic wax, acids,. stabiliser, boric acid, oxalic acid, compact binders, feel modifiers, acrylic binders, emulsion lacquer, casein,
Services:

Typical Physical Properties : Melting Point: Greater than 4000F Coefficient of Thermal Expansion: 4.2 x 10-6cm/cm/C Hardness: 7.5 Moh's Scale Thermal Conductivity: 14.5 BTU/sq. ft./hr./F/in. Index of Refraction: 2.0 Thermal Stability: no change to 3090F (1700C) Average Particle Size : 1500 Spectralux : 6.0 - 8.0 Microns 3500 Spectralux : 1.90 - 2.10 Microns 4500 Spectralux : 1.65 - 1.75 Microns 5500 Spectralux : 1.40 - 1.5- Microns 6000 Spectralux : 1.20 - 1.30 Microns 7000 Spectralux : 0.95 - 1.05 Microns

Description Naphthalene Sulfonate (FDN) concrete admixture is a high range water reducer, high concentrate naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate (NSF), SNF, PNS, etc.. Naphthalene Sulfonate (FDN) concrete admixture is made of naphthalene, sulfonic acid, formalin and alkali through sulphuration, hydrolyzation, condensation and neutralization reaction. Naphthalene Sulfonate (FDN) concrete admixture contains no chloride. It conforms to the requirements of chemical admixture specifications for concrete: ASTM C 494, Type F; ASTM C 1017. Application 1.Naphthalene Sulfonate (FDN) concrete admixture is suitable to make autotrophic concrete, steam curing concrete, steel concrete and prestress concrete, all of which are made mainly of portland cement. When concrete added this superplasticizer needs to be steam cured, it requires considerable structural strength. The curing requirements should be pre-tested. 2.Naphthalene Sulfonate (FDN) concrete admixture is applicable in areas with the daily lowest temperature of and for making concrete which requires high fluidity, high strength or steam curing. 3.Naphthalene Sulfonate (FDN) concrete admixture can be used to make C80 concrete with slump loss between 50mm and 70mm, or C60 concrete with that between 180mm and 220mm. 4. Naphthalene Sulfonate (FDN) concrete admixture could be used as a raw material together with other components to make other kinds of admixtures, such as accelerator, retarder, anti-freezing agent and pumping aid to satisfy requirements from different construction projects, techniques, materials and environmental temperatures. 5. Naphthalene Sulfonate (FDN) concrete admixture will also fluidize concrete, making it ideal for tremie concreting or other applications where high slumps are desired. 6. Naphthalene Sulfonate (FDN) concrete admixture is compatible with Portland Cement, Portland Slag Cement, Fly-ash Cement, Portland Pozzolanic Cement, etc. Features and Benefits 1. High water-reducing rate: Naphthalene Sulfonate (FDN) concrete admixture has a water reducing rate of more than 25%. It effectively increases concrete fluidity and reduces water bleeding and cement segregation. Therefore, it improves concrete placement and makes concrete easy to use and compacting. 2. Strengthening ability: Given the same amount of cement and slump requirement, this product can increase the concrete strength by 50-110%, 40-90%, 40-70% and 20-40% on day 1, 3, 7, and 28 respectively. 3. Good compatibility: It can be used with various types of cement. It is compatible with other admixtures. It may be used with expanding agents, air entraining agents as well as fly ash for supplementary and catalytic purpose. 4. Appropriate setting time: It doesn't influence the initial and final setting time. The difference in setting time generally is less than 1 hour. 5. Low sodium sulfate content: The aqueous solution has no crystallization in winter, which can avoid pipeline congestions. 6. Safety: It's non-toxic, non-irritating and non-emissive. It has no corrosion to steel bars. It's also hard to burn and explode. 7. High durability: It can modify the pore structure of concrete and improve impermeability, anti-freezing and thawing ability and carbonization. 8. Easy to use: It can be added directly or after being dissolved in water. It can be used for different working conditions and concrete mixers. Uses and Dosages 1. Naphthalene Sulfonate (FDN) concrete admixture can be added directly or added in after being dissolved. It can be added during mixing and after-mixing. 2. The afterward approach can achieve better result. Naphthalene Sulfonate (FDN) concrete admixture is addition rate ranges from 0.4% to 1.0% of the weight of cementitious material in 1m3 of concrete, while the suggested rate is 0.5%. 3. If Naphthalene Sulfonate (FDN) concrete admixture is used in powder form, add it directly into cement, but not onto wet sand and gravels. If solution is used, please fully stir and dissolve it completely. Package, Storage & Handling 1. Naphthalene Sulfonate (FDN) concrete admixture for powder: Woven fabric bag with plastic liner. Net weight: 25kg +/- 0.13 kg. 2. When being handled or stored, special care should be taken to broken package, humidity and moisture to avoid consolidating. If it's consolidated, please dry, shatter, then sift it through 0.63mm apertures or make solution before using. 3. Naphthalene Sulfonate (FDN) concrete admixture should be stored in a dedicated warehouse that is well-ventilated and dry. It's shelter life is 12months. 4. Since Naphthalene Sulfonate (FDN) concrete admixture is packed in woven plastic bags, though the product is nonflammable, cautions should be taken to avoid fire. 25kg/bag, 16 tons loaded in a 20ft.

Wall Putty is completely cement based putty which is white in color. Its use is better for the exterior as well as interior walls of buildings. The white colored cement-based putty binds very strongly with base plaster in such conditions as well when the surface is damp and it forms a good and protective base. The pores (fine one) on ceiling and walls can be easily fills up and gives you a fine even and very smooth and dry surface which is best for painting. Wall putty gives an effective protection against flaking; so it assures you good even, looking smooth walls of your home for so many years. Features / Advantages: It is white cement based and skim coated. For application of paint it gives smooth and water resistant surface. It has as excellent adhesion. It causes no peel off because of seepage. It gives excellent finish, increases the durability of paint, and causes less consumption of paint. No need of primer. No kind of curing is required. Areas of application: Application can easily applied on plastered surface. It gives fine finish and it is very useful for Inner and Outer walls. Surface Preparation and Application Before applying wall putty makes sure that the surface is free from dust or not, if not make it dust free. Also make sure that it is free from any type of fungus, greases, bitumen, and any kind of release agents, moss, paints, oils, loose particles or any kind of coating. Make sure that the surface should be free from all the above mentioned impurities otherwise it affects the workability of wall putty. Before applying make sure that the surface where the putty is supposed to be applied should be pre-wetted. This will helps you to provide a very strong bond with the substrate. Its better to apply at least two coats of Addage Wall Putty on plastered surface of wall (Each coat should be Max 1.5 mm of total thickness). Coverage The Addage Wall Putty covers almost more surface area that is exceeding to 9-10 Sq. ft. /kg. In two coats on new plastered wall.

TJ 441 Self-Adhered Polymer Modified Bitumen Waterproof Membrane is based on SBS elastmoeric modified waterproof membrane,laminating with a special PET film,which can be categorized into two types--N and PY. N has PE(Polyethylene),PET,and D(Non-PET film with adhesion in double side);PY has PE,S(sand),AL(Aluminum Foil),D;Its characteristics lie in suitable for wet substrate,no need to find flat substrate and painted surface disposal,free torch heat,integrating with the mortar or concrete perfectly. It's safe and environmental protection. Features: Supreme adhesion integrates with the substrate forever with special patent formula Suitable for various substrates enables to lower resource waste massively and save the cost and time Unique operation craft of wet treatment,free from primer,no need of heat melt Size Available Width-3.28ftï¼?1m Length-32.8ft(10m) 49.2ft(15m)65.6ft(20m) Thickness- N(1.2mm,1.5mm,2mm) G (2mm,3mm,4mm) Packaging,storage and shipping Product is packed into rolls with plastic woven bag Avoid sunlight and rain,store it under current and dry. The temperature should lower than 50 ,putting it upright and keep the story less than 2 TJ-789 TPO Waterproof Membrane TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions Installation Guide 1. Substrate Requirements: Clean,no bugle and pointy object 2.Installation Steps(Mechanical Fastener) Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check 3. Installation 1) Clean the litters,dust on the substrate 2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue 3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board 4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed 5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics 6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld 7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane 8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants