We all know that rusting is a severe problem all over the world. The global cost of corrosion is estimated to be 3 to 4% of the global GDP. It is a huge global loss and still unnoticeable. Almost all the present technologies to stop corrosion are not able to deliver fool proof results & fail to stop rusting process especially fill form corrosion permanently.Hence everybody is fed up & looking for a one time and lifetime kind of solution. In this regard we have invented & introduced Steel Guard Nano Coat or 'SGNC' as a best Rust preventive and surface protection compound.It is a water based nano technological formulation made out of precious metals in nano form. And It is an absolutely GREEN product. It is to be applied on a cleaned and degreased iron surface before paints with suitable method. After application,It penetrates inside the surface and forms metallurgical monolithic bonds with iron molecules and creates an armor around it.During this process nobility of the surface is increased from ferrous to non ferrous and SGNC with concrete or sealer paint system on top of it stops water,oxygen and chloride ingress in the iron surface and stops corrosion process in it completely.
Its unique features have made SGNC very much useful in almost all the industries.
It can be applied on HR black, HR pickled, CR, MS casting or Machined iron surface after degreasing. It can be applied on TMT rebars in the construction process which increases the bond strength by two times.
It delivers marvelous performance & replaces many current processes . ETP is not required.
In marine application , it can act like a shop primer & keeps objects w/o rust if stored in a covered area up to relative humidity < 65 % & kept away from continuous water contact.
It can be used as a rust remover + preventer on flash rusted components and can be used for touch up at dealer's end, repair shops or service centers.
We can straight away eliminate shot blasting, galvanizing, 7 tanks phosphating or 13 tanks CED etc processes for fabricated assemblies, fasteners, flanges, pipes, riveting etc shelf components where FIFO can not be maintained and use of SGNC+1 or 2 coats of paint can have a good cost reduction.
This can be used as touch up chemicals and to clear under warranty corrosion claims or for under maintenance components/ assemblies also. Weld ability is not a problem after SGNC application.
The Treated surface delivers exceptional performance on the field.
Supplier: Steel guard nano coat ( invented rust preventive )
Services:
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
Supplier: Manufacturers, suppliers and exporters of locks, auto locks, door locks, door and window hardware, handles, hinges and stainless steel kitchenware, utensils., kitchenware, utensils, cutlery, ware, cocktail shaker, bucket, bowls, bar utensils, tray, and kitchen tools.
brass, aluminum, steel coating and various finishes.
locks, hardware, mortise locks, padlock, cam locks, safe locks, door hinges, handles and many more.
Services: Manufacturers, suppliers, and exporters
Nano Coat is a revolutionary, light cured, protective coating which effectively seals the surface to create smooth and glossy surface on the glass ionomer and composite restorations. It can also be used in difficult to polish areas such as posterior fissures or interproximal areas of indirect composite restorations. INDICATIONS Protects glass ionomer fillings from drying during the first hour after placement Increase wear resistance of restoration Glossy surface for composite resins
1. Providing nano-thin film deposition solution for customer's new product development and production 2. Providing from thin film material design suitable for products to simulation, process design, lay-out design, and production volume design 3. Through arrangement and design of equipment suitable for customer needs Provides an efficient and optimized system. Application: 1.R&D Application 2.Decorative Coating Application 3.Functional Coating Application 4. Special Coating Application
nano ceramic coating liquid can use for otomotif, airplane, etc. This produck have Function for Hydrophobic, Wet look, glossy look and Thermal protection/ UV Protection. This produck can be hardness until 9h grade A for Varian Ceramic Coating
