Rug Centrifuges

Supplier: Carpet cleaning machines, rug centrifuges, upholstery cleaning machines, floor scrubbers, industrial vacuum cleaners, cleaning chemicals, dehumidifiers and so on.

TPR100RV series Vertical Centrifugal Sump Pump with rubber impeller is 100% same and interchangeable with 100RV-SPR rubber lining vertical slurry pump. TPR100RV Vertical Sump Pump for Mining and Aggregate Slurries, it is also is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 100RV vertical sump slurry pumps are mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design, and suction agitator is also available.

Tobee 4/3E-HH High Head Slurry Pump is fit for a variety of applications ranging from filter press feeds to pipeline transport staging pumps. The high heads along with sturdier wear parts makes these pumps some of the most rugged in the slurry pump line. Extensive exterior ribbing allows for higher heads to be reached with a single slurry pump, and bulked up wet end parts handle the toughest applications in the field today. Design Features: Ductile iron fully lined casing provides durability, strength and long service life. Multi-stage high pressure operation to 750 psi. Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime. Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs. Large, open internal passages designed to maximize wear life and lower operating costs. Thick elastomer and alloy liners provide superior corrosion resistance and maximum wear life. Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.

Tobee Impeller SL30147A05 is made from A05 that will be used for 300S-L Horizontal Slurry Pump. The slurry pump impeller is one of the most important parts of the slurry pumps. It is located in the pump casings on the shaft and connects with the motor to form a centrifugal force system. When the motor drives the impeller to rotate, the blades force fluid to rotate, increasing its pressure, potential energy, and kinetic energy. At the same time, under the force of inertia, fluid flows from the center to the edge of the impeller, out at a very high speed, and passes through the discharge pipeline to be transported. When an impeller is rotating, and in good condition, the slurry pump can easily meet output expectations. however, highly prone to wear and require regular maintenance to ensure efficiency. Design Features: â?? Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime. Ductile iron fully lined casing provides durability, strength, safety, and long service life. â?? Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs. Large, open internal passages designed to reduce internal Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life. Designed for rugged duties while offering excellent efficiencies. Minimal shaft/impeller overhang reduces shaft deflection and increases packing life. Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life. Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime. Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs. Mechanical seals reduce flush water usage, minimizing pump operating costs.

Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application. Design Features: Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime. Ductile iron fully lined casing provides durability, strength, safety, and long service life. Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs. Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs. Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life. Designed for rugged duties while offering excellent efficiencies. Minimal shaft/impeller overhang reduces shaft deflection and increases packing life. Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life. Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime. Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs. Mechanical seals reduce flush water usage, minimizing pump operating costs.

Tobee 300F-L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application. Tobee�® 300F-L Light Duty Slurry Pump Wet End Parts: 300F-L, 300FF-L Slurry Pump Impeller RSL30147A05, RSL30147R55, RSL30147S42 300F-L Slurry Pump Frame Plate Liner Insert SL30041MA05; 300F-L Slurry Pump Volute Liner SL30110A05; 300F-L Slurry Pump Throat Bush SL30083MA05; 300F-L Slurry Pump Bearing Assembly FRS005M; 300FF-L Slurry Pump Bearing Assembly FFRS005M; 300F-L Slurry Pump Stuffing Box RSL30078D21; 300F-L Slurry Pump Shaft Sleeve RS076C21, etc. Tobee 300F-L Light Duty Slurry Pump Design Features: Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime. Ductile iron fully lined casing provides durability, strength, safety, and long service life. Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs. Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs. Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life. Designed for rugged duties while offering excellent efficiencies. Minimal shaft/impeller overhang reduces shaft deflection and increases packing life. Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life. Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime. Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs. Mechanical seals reduce flush water usage, minimizing pump operating costs.

Tobee THH3/2D slurry pump is 100% interchangeable with 3/2D-HH high head slurry pump, the HH slurry pump is made from wear ressitance material (high-chrome), which the wear-life is same as the original HH slurry pumps. 3x2D-HH high pressure along with sturdier wear parts makes these pumps of the most rugged. Extensive exterior ribbing allows for higher heads to be reached with a single pump, and bulked up wet end parts handle the toughest applications in the field today. Design Features 1. Ductile iron fully lined casing provides durability, strength and long service life. 2. Multi-stage high pressure operation to 750 psi. 3. Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime. 4. Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs. 5. Large, open internal passages designed to maximize wear life and lower operating costs. 6. Thick elastomer and alloy liners provide superior corrosion resistance and maximum wear life. 7. Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs. Tobee�® THH3/2D slurry pumps are designed for handling highly abrasive, high density slurries in metallurgy industry, mining industry, coal, power, chemical, building material and other industrial departments. The pumps of these models also can be installed as multi-stage series.