Connector

Specifications Material Specification: Housing: High Temperature thermoplastics: LCP; Color: Black Contact: Phospor Bronze/Brass Shell: Brass/Phospor Bronze/SUS301 Plated: Contact: gold plated (G/F,5U"/10U''/15U''/30U'') Shell: Gold/Nickel Materials and plating can be changed according to customer definition. Mechanical Characteristics: 1,Insertion Force:35 N Max; 2,Extraction Force:10N Min(Initial) 3,Durability Life:50000 Times. Electrical Characteristics: Contact Current Rating:0.5 Amperes Dielectric Withstanding Voltage: AC 500V r.m.s Insulation Resistance: ¡Ý100M¦¸ Contact Resistance: ¡Ü100m¦¸ Operating Temperature:-25 oC - +85 oC Environmental Spec. Have passed below tests: 1.Salt Fog Test 2.AIR Reflow Soldering Test 3.Mechanical Vibration Test 4.Adhered Tin Test 5.Temperature Cycle Test. Application: Computer, MP3 player, MP4 player, digital video and camera, PADs, GPS,flash drive and cable ASSY. 1500PCS/Reel,6000PCS/Carton.

VIBRATION CONNECTORS MANUFACTURERS & SUPPLIERS Stainless steel vibration eliminator: Aeroflex Vibration eliminators are specially designed to absorb mechanical vibration and destructive force of noise which is transmitted by the compressor, and also eliminate the stresses linked with piping thermal expansion in refrigeration and air condition installation. These connectors are TIG welded stainless steel hose with copper pipe, due to there is not any brazing so these connector bear more temperature as compared to brazed fitting The main function of vibration eliminator is to absorb compressor vibration and stop its transition into pipe network, by isolating the vibration the risk of damage to pipe work and related component reduce, 1.1 Size range of vibration eliminator: The comprehensive range of vibration eliminator are available from to 3 1/8 Outer diameter of copper tube, copper tube are comply a per ASTM B88 & ASTM B88M (water & general plumbing system) & ASTM B280 (air conditioners & refrigeration system) 1.2 Material specification: Aeroflex Vibration eliminators are manufacture from EN 10028-7, Stainless steel SS 321 & SS 316L annular corrugated hose with SS 304 stainless steel braid. All unit are brazed with copper tube, detail dimension of pipe and vibration connector are in the table. All the units are ultrasonically cleaned and completely dried made suitable to refrigeration system Individual package of connector are remain under sealed plastic tubing. The maximum test pressure is 1.5 time of maximum operating pressure and minimum burst pressure is 5 time of maximum operating pressure. Copper tube end are designed as sweat connection for refrigeration tubing which have inner surface as per ASME B16.18 1.3 Installation conditions: Aeroflex vibration eliminator should be installed as close as possible to the compressor and end away from the source of vibration. Vibration eliminator should be installed perpendicular to the direction of vibration (in-line with the compressor crank shaft) Horizontal Vibration: Where source of vibration is only in the horizontal plane, a single vibration and noise eliminator may be installed. Best results will be achieved by installation at 90�° to the source which is normally the crank of the compressor in a horizontal plane. See fig. 1 Vertical / horizontal vibration: Where the source of vibration and noise is in both horizontal are in vertical planes. Best result will be achieved by installing two vibration eliminators at right angle to each other see fig. 2 Although the copper tube end of vibration absorber are attached by TIG welding (special alloy filler) during installing if unit is over heated there is not effect on the connector

Din 41612 idc male/female connector Straight/right angle type Long/short body Dual/three rows 32pin 64pin Tray

1) security of the push-pull self-latching system; 2) multicore types with 2 to 32 pins; high-density installation for space-saving; 3) soldering, crimping and pcb contacts 4) straight or elbow (90 degree) 5) multiple key options to avoid mismating between similar connectors; 6) 360-degree screening for full emc protection 7)keying system(g is standard key) for connector alignment. Custom

Specifications Material Specification: Housing: High Temperature thermoplastics: LCP; Color: Black Contact: Phospor Bronze/Brass Shell: Brass/Phospor Bronze/SUS301 Plated: Contact: gold plated (G/F,5U"/10U''/15U''/30U'') Shell: Gold/Nickel Materials and plating can be changed according to customer definition. Mechanical Characteristics: 1,Insertion Force:35 N Max; 2,Extraction Force:10N Min(Initial) 3,Durability Life:50000 Times. Electrical Characteristics: Contact Current Rating:0.5 Amperes Dielectric Withstanding Voltage: AC 500V r.m.s Insulation Resistance: ¡Ý100M¦¸ Contact Resistance: ¡Ü100m¦¸ Operating Temperature:-25 oC - +85 oC Environmental Spec. Have passed below tests: 1.Salt Fog Test 2.AIR Reflow Soldering Test 3.Mechanical Vibration Test 4.Adhered Tin Test 5.Temperature Cycle Test Application: Computer, MP3 player, MP4 player, digital video and camera, PADs, GPS,flash drive and cable/PCB ASSY 100PCS/Tray,1000PCS/Bag

A full range of board to board connectors in 0.5mm, 0.8mm, 1.0mm, 1.27mm, 2mm, 1.27mm x 2.54mm, 2.54mm, 3.96mm and 5.08mm pitches.

Impedance 75 Product Series: BNC connector Body Plating: Nickel Connector Body Style: Straight Connector Material: Brass Contact Plating: Gold Gender: Male RoHS Certificate: Yes Contact Resistance í_ 1.5 m í_ 1mª+ Insulation Resistance í¦ 5*1000 Mª+ Dielectric Withstanding Voltage 1.5 kV rms, 50 Hz(depending on cable) . 10pcs/bag,

1.it is the waterproof connector 2.Accoring to the standard DZ4Q/RE008-84 3.Shell size:FQ14,FQ18,FQ24,FQ30 4.Contact:each shell size have diffrent pins Working temperature: -55 degrees Centigrade- +100 degrees Centigrade Relative temperature: Temperature is 40 degrees Centigrade, reach 93í+ 3% Vibration: Frequency 10-200HZ, acceleration 150m/s2 Collide : Acceleration 490m/s2 Permanent acceleration vibration: The acceleration reaches 245mm/s2 Atmospheric pressure: Reach 4.4KPa Mechanical life-span: 500 times The connector should be able to stand the test of 30 minutes but not enter water within the connector in water 1 meter deep

1.LEMO connector, mini connector 2.copy of the lemo connector, but the technist can meet the requirement 3.shell size:0,1,2 The circular electronic connector are designed for the connection between sensors and electronic instruments or equipments .The connector is compact and its push-pull elf-laching connecting system allows the connector to be mated simply