Product Introduction
JPXC-1000 biased pole relay is an important component in interlocking equipment and the main equipment to ensure the safe operation of the system. The signal relay can control the switching of the turnout, lock and unlock the way, and control the opening and closing of the signal machine.
Relays are widely used in railway signal technology, called signal relays, which are important components in railway signal technology. It plays an important role no matter as the core component of the relay signal system or as the interface component of the electronic or computer signal system. The reliability of the relay action directly affects the reliability and safety of the signal system.
Product Usage
The JPXC-1000 biased pole relay is designed to identify the polarity of the current in the signal circuit. In the signal circuit, it is used in the turnout indication circuit and the single-multiplex semi-automatic blocking circuit.
Features
1. The relay adds a pole-biased magnet to the magnetic circuit, so that the armature is biased to the drop position by the permanent magnetic force. The pull-up of the armature is related to the polarity of the current in the coil. When the current through the coil is in the specified direction, the armature is pulled up, and when the direction of the current is opposite, the armature remains stationary. It only has a stable state, that is, after the armature is sucked up by electromagnetic force, it will fall when the power is cut off, and it will always be in a falling positioning state.
2. The relay is a heavy spring force DC electromagnetic relay, which uses the principle of "constant gravity" to force the moving and closing contacts to open when the coil is powered off.
3. It adopts silver-silver cadmium oxide contact, which has the characteristics of strong anti-adhesion and low contact resistance.
4. The magnetic circuit adopts electromagnetic pure iron material with small residual magnetism, and installs the stop piece at the closed position of the armature and the iron core to ensure the minimum air gap of the magnetic circuit, prevent the magnetization of the ferromagnetic parts of the magnetic circuit, and ensure the reliable fall of the relay.
5. The relay contact system is composed of ordinary contacts, with 8 groups of ordinary moving on and moving off conversion contacts.
6. The rated voltage of the relay is DC 24V.
Product Features JSDPC-1000 dynamic relay, JSDPC-820 dynamic relay, and JSDPC-830 dynamic relay were once used in microcomputer interlock interface circuit. At present, JSDPC-1000 dynamic relays, JSDPC-820 dynamic relays, and JSDPC-830 dynamic relays have ceased to be used on large railways, and are only used in hump circuits when users require them. Features 1. Two-way dynamic control signal relay. 2. Controlled by dynamic pulse signal. 3. Dynamic pulse control signal: JSDPC-1000 dynamic relay is 24V, 2.5Hz. JSDPC-820 dynamic relay is 24V, 1Hz. JSDPC-830 dynamic relay is 24V, 5Hz.
Product Introduction JWXC-1000 type infinite relay is used to close and open the special multi-way switch of signal control circuit. It is an important part of railway signal. It plays an important role no matter as the core component of the relay signal system or as the interface component of the electronic or computer signal system. The reliability of the action of the relay directly affects the reliability and safety of the signal system. Features JWXC-1000 type infinite relay is one of the main components in railway signal equipment. Its reliability and safety in use are necessary requirements to ensure the normal operation of various automatic control and remote control signal equipment. Product function The signal relay is an important component in the interlocking equipment, and is the main equipment to ensure the safe operation of the system. The signal relay can control the switching of the turnout, lock and unlock the route, and control the opening and closing of the signal machine. Its reliability, availability, maintainability and the whole line are the keys to the safety of railway transportation and operation services. Product Usage The JWXC-1000 type infinite relay is used as a general relay in the signal circuit. Executive standard GB/T7417-2010 "Railway Signal AX Series Relay" Product Usage JWXC-1000 type infinite relay (hereinafter referred to as relay) is used as a general relay in the signal circuit. Applicable environment The applicable environment of the relay is: a) Ambient temperature: -40~+60; b) Relative humidity: not more than 90% (temperature +25C); c) Air pressure: not less than 70kPa (equivalent to an altitude below 3000m); d) Vibration: the vibration frequency is not more than 15Hz, and the amplitude is not more than 0.45mm; e) Working position: horizontal; f) There should be no harmful gas causing explosion hazard around, and good dust-proof measures should be taken. Applicable characteristics Mechanical properties Number of contact groups: 8QH; Identification pin number: 11, 52; Contact gap: not less than 1.3mm; Pallet gap: not less than 0.35mm; Contact pressure: the dynamic contact point is not less than 250mN; the dynamic disconnection point is not less than 150mN; Contact uniformity error: not more than 0.20mm. Electrical characteristics
We offer BC Brand JRC-071M Subminiature Hermetically Sealed Relay. ENVIRONMENTAL CONDITIONS: Temperature Range: -65~+125C Relative Humidity: 40 C at 95% Atmospheric Pressure: 86~106kPa,Low Pressure 4.4 kPa Shock: 490m/s2 Vibration: 10~2000Hz, 196m/s2 Liner Acceleration: 490m/s2 TECHNICAL DATA: Contact Arrangement: 4 Form C (4PDT) Coil Voltage: DC Coil Dissipation: 0.9W Insulation Resistance: 1000Mohms Dielectric Withstanding Voltage: 500V r.m.s. Contact Resistance: 0.10ohms Operate Time: 8ms Release Time: 5ms Contact Load : 2A/28VDC(Resistive) Life: 1 x 104 Operations Leakage:1 x 10-1 Pa.cm3 /s Dimensions: (L x W x H) 21 x 11 x 11.5mm Weight: 11g . Ordering Information: JRC-071M/ 027 - 0 1 1 2 3 4 . 1. Model 2. Part No.(Coil Voltage) 3. Mounting Type 4. Terminals .
ENVIRONMENTAL CONDETIONS: Temperature Range: -55~+85 C Relative Humidity: Up to 98% at +40 C Atmospheric pressure: 86kPa~106kPa, Low pressure 4 kPa Vibration: 10~2000Hz, 196 m/s2 Shock: 735m/s2 Acceleration: 490 m/s2. TECHNICAL REQUIREMENTS: Rated Voltage: 12VDC, 18VDC, 24VDC, 27VDC Insulation Resistance: 1000Mohm Dieletric Withstanding Voltage: (RMS/50Hz) 500V Contact Resistance: 0.1ohm Rated Load: 2A28VDC, 4A28VDC Life: 1x105: 1x105 / 2x104 Contact Form: 2C(DPDT); Time Delay: 0.05~500s(Nonadjustable) Outline Dimensions: 20.5 x 10.5 x 15mm Weight: 13g .
Temperature Range: -55 ~ +85C Relative Humidity: 98% at +40C Atmospheric Pressure:86~106kPa,Low pressure 4.4kPa Shock: 490m/s2 Vibration: 10~500Hz,98m/s2 Liner Acceleration: 245 m/s2.
ENVIRONMENTAL CONDITIONS: Temperature Range: -55 ~ +85C Relative Humidity: 98% at +40C Atmospheric Pressure: 86~106kPa, Low pressure 4.4kPa Shock: 117.6m/s2 Vibration: 500Hz,58.8m/s2 Liner Acceleration: 147 m/s2. TECHNICAL DATA: Contact Arrangement: 6 Form C (6PDT) Coil Voltage: 12~27VDC Coil Dissipation: 2.5W Insulation Resistance: 500Mohms Dielectric Withstanding Voltage (RMS/50Hz): 500Vr.m.s. Contact Rresistance: 0.05ohms Operate Time: 8ms Release Time: 4ms; Contact Ratings: 2A27VDC Resistive Electrical Life: 1 x10 5 Operations Leakage Rate: 1 x 10 0 Pa.cm3 /s Dimensions: + 31 x 34 mm Weight: 75g Approved by Standards: QZJ840617 .
CONTACT RATINGS: Contact Arrangement: 1 Form A (SPST-NO) Max. Switching Power: 1200VA / 300W Max. Switching Voltage: 120VAC / 30VDC Max. Switching Current: 10A Contact Resistance: 100mOHMS Initial Contact Resistance: 100mOHMS Rating Load: 5A250VAC,30VDC Contact Material: Ag-CdO. TECHNICAL REQUIREMENTS: Coil Source:DC Coil Dissipation:1H1:0.45W; 1H1L:0.2W Insulation Resistance:100MOHMS Dielectric Withstanding Voltage (RMS/50Hz) 750VAC(between contacts) 3000VAC(between coil and contacts) Electrical Life:1x10 5 Operations Mechanical Life:1x10 7 Operations Contact Form:1A(SPST) Operate Time:10ms Release Time:2ms Outline dimensions:18.2mm x 10.5mm x 15mm Weight:9g Approved standard:UL,CUL(E151736),TUV,CQC. ENVIRONMEN , TAL CONDITIONS: Temperature Range:-40~+85C Relative Humidity:Up to 45~85% at +20C Atmospheric Pressure:86~106kPa Vibration:10~55Hz Dual Amplitude 1.5mm Shock:98m/s2 Operating Position:Optional .
Supplier: Relays, including hermetically sealed relays, electromagnetic relays, latching relays, general purpose relays, automobile relays, timing relays, polarized relays, RF coaxial relays, solid state relays and photo mos relays
Product Usage The JC type AC relay is used as a buck-boost control relay, a signal switch track power supply supervisory relay, and a main screen and a backup screen conversion relay in the power supply screen. Can replace JZXC-20000 rectifier relay. Features 1. The relay is an AC 220V heavy spring force electromagnetic relay with reinforced contacts. 2. The relay magnetic system is a clap-on AC magnetic system, which is composed of an iron core, a coil and an armature. 3. It adopts silver-silver oxide contact, which has the characteristics of strong anti-adhesion and low contact resistance. 4. The contact system is composed of ordinary contacts. There are four groups of moving on and off conversion ordinary contacts and two groups of moving and closing ordinary contacts. The structure of the ordinary contacts is the same as that of a non-polar relay. Applicable environment a) Ambient temperature: -40~+60; b) Relative humidity: not more than 90% (temperature +25C); c) Air pressure: not less than 70kPa (equivalent to an altitude below 3000m); d) Vibration: the vibration frequency is not more than 15Hz, and the amplitude is not more than 0.45mm; e) Working position: horizontal; f) There should be no harmful gas causing explosion hazard around, and good dust-proof measures should be taken. Dimensions
