Extra-Large Handheld Polariscope

Techwin Handheld Tester OTDR TW3100E with Automatic Measurement Mode We will try our best to provide products similar to Yokogawa OTDR, Anritsu OTDR, EXFO OTDR, JDSU OTDR, Ideal Networks OTDR. Introduction 1.Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved and automatically analyzed. 2.Multi-wavelength Measurement Mode: In the parameter setting, the wavelength can be automatically switched into the multi-wavelength measurement mode. Under this mode, the analysis can be achieved on the attenuation state of the same fiber section under different wavelengths. 3.Trace Fixing Function: It can achieve the same-screen comparison and display of one trace with another real-time trace or the trace under the average measurement, which is very useful for the installation of multi-core fiber or the checking of the aged fiber in the optical fiber network already been installed. 4.Multi-wavelength Analysis Function: It can achieve the comparison, display and analysis functions of any trace file. 5.FTTx online testing, able to identify the splitter and the fibers end. 6.Large-capacity lithium-ion rechargeable battery, with the long standby time over 8 hours. 7.Bellcore file format (.sor), with the storage of greater than 10,000 traces. 8.Communication Light Detection: It can effectively protect the test instrumentation and communication equipments.

Active Aluminum Hydroxide 2)Technical Index Appearance:White powder Al2O3í¦(%) :64 Firing lossí_(%) 35 Attached waterí_(%)0.5 Fe2O3í_(%) 0.03 SiO2í_(%) 0.04 Na2Oí_(%) 0.5 Activationí¦(%)98 Whitenessí¦(%)96 Physical feature: there are mainly 4 sizes of active aluminum hydroxide 3) Application: The product is made of high quality raw materials via being broken with extra micro air and surface activation of coupling agent. It is of additive smoke and flame retardant without halogen, with the features of large amount usage, good flame resistance and low cost, improving electric arc resistance, and the strength of impact and bending, being mainly applied at electric wire, cable, insulated materials, flame retardant rubber hose, tape, wind tube cloth, electric materials, etc. internal plastic with knitted exterior covered with film, with the net weight of 25kg

TH-2004D-2004AB1 Benchtop dispensing robot for two component mixing&dispensing Patent Numberï¼?ZL 2010 2 0120750.X FEATURESï¼? Good for viscosity less 10000cps before mixing,mixing ratio by weight is 1:1 to 1:3, precision dispensing. 1.Feed system is 4 liter tank large capacity for liquid material. Other have 0.5 liter ,2liter, 20 liter can option. 2.Two component accuracy suck-back dispensing valve. 3.High Precision Liquid dispensing controller system Application Liquid Material:2 part (ab) epoxy glue,2 part adhesive,2 part polyurethene,2 parts glue, a b epoxy,a b epoxy glue,a b glue,ab adhesive,ab dispenser,ab epoxy adhesive,ab glue epoxy resin, ab glue potting,epoxy ab dual glue Packing capacity:tank (2liter,4liter.20liter can option) ITEM TH-2004D-300 TH-2004D-400 TH-2004D-500 X/Y/Zworking range 300 x 300 x 100mm 400 x 400 x 100mm 500 x 500 x 100mm Dimensions (WxDxH) mm 500 x 580 x 610 600 x 680 x 610 700 x 780 x 610 Weight 34kg 39kg 46kg Standard CE Approved XY/ZMaximum Load 10 kg / 3 kg XY/Z Speed 800/350 mm/Axis Data memory capacity 9999programs Display way LCD display Drive System Precision micro-stepper motor Transmission Timing Belt/ Precision Linear Guides Edit Programming Handheld Programmer I/O Signals 4 Inputs / 4 Outputs Patterns 3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power Supply AC110V/220V Internal conversion Working Temperature 0 ï½?40 Relative Humidity 20ï½?90% (no condensation) Help you more : · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste Complete with an accessory dispensing kit: NO Descriptions QTY Note Part# 1 TH-2004D ROBOT 1set TH-2004D 2 TH-2004AB Dispenser controller 1set TH-2004AB 3 Dispensing signal line 3core-4core 1pcs TH-DSL02 4 Teach pendant/Teach pendant Cable line TH 1pcs TH-DT001 5 Valve/Fix broad for valve TH-700J 1pcs TH-700J 6 4kgs Tank TH 2PCS TH-100Y 7 Tee TH 1pcs TEE 8 STATIC MIXER TH 1pcs 9 Dispensing tip TH 10pcs 10 Air tube connect controller and valve 1pcs THA 11 Air tube using for controller 1pcs THA 12 Glue tube for tank(short) 2pcs THG 13 air tube (white) 2pcs THA 14 Tool with adjusting ratio 1pcs 15 Handle( black) 4PCS 16 Dispensing tip 10PCS 17 Power cord 2pcs 18 Jig(option) As sample 1set THC 19 Screw TH 1set TH-DS05 20 Connect Drawing TH 1set 21 Manual operation TH 1pcs 22 U disk(video.manual) TH 1pcs 23 Ex-work Report TH 1pcs 24 Machinery certificate TH 1pcs 25 Warranty card TH 1pcs 26 CE certificate TH 1pcs 27 Catalogue TH 1pcs

Key Features: LRP18x1-single bowl, capacity is 12 liter,mixsystem is spraying system,and this kind of Commercial Beverage dispensers can maximize sales in any kind of business, grocery stores, coffee shops, hotels, cafes, restaurants, bars, etc. Beverage dispensing machines come in a variety of sizes and options, and you may need a few different types of beverage dispensers to meet the requirements of your clients. Please have a looking here,we may offer a selection of refrigerant equipment-commercial beverage dispensing equipment here. Dimensions 1. Visual-The product is displayed in a clear transparent container to generate appetite appeal and help you sell more product 2. Compact design- Stainless steel unbreakable handle, all parts in contact with beverages are made of alimentary (food grade) materials and removable by hands (without tools), easy to install and disassemble,all this save your time cost, very profitability. 3. Services-Every drink dispenser is carefully designed and engineered to ensure optimum performance and more running time. It is easy to clean and maintain, and retaining its new appeal to your customers. 4.Structure design-Engineered to be the best-Each shop drink dispenser is uniquely designed to adapt to your needs. This versatility means you can attract more customers with their favorite drinks. The unique evaporator and extra large pump cools more effective and can reduce energy consumption. Its stainless steel cylinder, and front panel provide extra long life as well as easy cleaning. 5. Consistency-Shop drink dispenser's rotary system continuously circulates the product to ensure a fresh and consistent drink every time. Detailed Specifications Model:MulticolorLRP12x1 Bowls:1 Capacity:12liter Net weight:19.7KG Gross weight:22.5KG Noise:í_55dB Watts:240W/498W Refrigerant:Rl34a Voltage:115V/220V/50HZ/60HZ Overall dimensions:HxWxD=230x430x640mm Packing dimensions: HxWxD=260x460x740mm Mixing system:spraying cooling system Refrigerant temperature:3íµ-8íµ Heating temperature:40íµ-70íµ

High humidity environment is a big impact factor of power transmission and transformation equipment, it will bring discharge, flashover will eventually cause the switch to trip, even burning down equipment caused a large-scale blackout. Switchgear, electrical cabinet, exchange control cabinets, outdoor terminal boxes, Due to the compact internal equipment installation, wet and condensation will be more serious consequences. At present, most user choose heating, ventilation and other method to prevent condensation. but in some well sealed cabinet and high temperature environment, traditional heating and exhaust air method is hard to work well. Blue Jay company developed DH series using semiconductor technology, in a certain place to lead controlled condensation, make the cabinet interior humidity fall to safe value. It designed ultra-small install size, high efficiency energy-saving, do not need extra heater and fan wiring. And comes with the data acquisition module for remote monitoring, It's an efficient and reliable device to replace the old thermostat and heater / fan combination.

DC Electric Screw driver SKD-7000 Medium torque automatic trigger and push start clutch type -Low-voltage automatic clutch electric screwdriver with power controllers, can keep long-time operation, high stability, no influence by fluctuated voltage. -Be operated with torque fixing ring (KC-2) most applied to office machines, PC peripheral operations. -High technology motor, made by extra strong magnet, fast start and low electric current. Fan and vent let motors fast heat emission, low temperature for successive using. -Clutch is made by alloy steel materials from Japan, solid and endurance, fatigue-resistant, high stability and longer life. -Precisive torque adjusted from small to large, stepless, stable, fast speed, easy operation and high working efficiency. - Any screws and sockets can be used. As fastened screws reach pre-set torque, clutch will be automatically stopped as well. Carton

Description : Optics : Fitted with Achromatic Objectives, designed as per Standards of Optical Excellence. Fully Parfocal and perfectly precentered, these Objectives give user details, never seen before. Sharper Resolution and extra flat field of view, make viewing a strain free pleasure. Coupled with wide field eyepieces. they provide a color free image. The Standard Microscope is supplied with four Semi-plan Achromatic Objectives-Achro 4x, Achro10x, Achro 40x (SL) and Achro100x Oil (SL), and a pair of WF 10x eyepiece. Observation Head : Extra clarity and high Contrast Binocular Observation tube, rotatable through 360, inclined at 45, off the Horizontal. Adjustable interpupillary eye-quality. Optionally, a 30 inclined Seidentop design Binocular tube can also be provided. Fatigue Free Focusing: Traveling on Ball slides, The Co-axial focusing system incorporates a very precise and wear resistant linear bearing mechanism that eliminates vibration and backlash. The coarse adjustment knob has a built in control to alter the tension of the motion. The touch sensitive fine focus knobs are graduated in 0.01mm increments. Large Mechanical Stage : The 150 x 120 mm Stage Plate incorporates a linear bearing mechanism with right hand low positioned CO-AXIAL movement Controls. It has a travel range of 75mm along the X Axis and 45mm along the Y-Axis for easy scanning of large specimens. A 0.1mm Vernier provides accurate location of the specimen area. Nosepiece : Precision-built (reverse type) quadruple revolving nose piece, traveling on ball beating, ensures a common field Center, on changing magnification and re-introduction. The soft ribbed grip for easy rotation helps prevent damage from gripping the objectives. Illumination Light Control: Built-in to a well contoured, a compact base, with convenient hand rests and powered by a 6V-20 watts halogen light source, the illumination system provides a bright and even illumination at any magnification. The lamp is precentered for user convenience. Replacement of lamp can be done without opening of base or electricals. Light intensity can be varied through electronically controlled knob, the illumination is further enhanced through well designed illuminator lens system and a sub stage Abbe Condenser with N.A 1.25 and built in Iris Diaphragm and Filter Holder. Optionally, the Bright Field Condenser can be easily replaced by phase Contrast Turret or Dark Field Condenser. All air-Glass Surfaces of the lenses and Prism are Anti - Reflection coated, to eliminate light losses to the maximum.

Product Introduction 3-phase energy meter calibrator introduction: HZ-3521 handheld meter field calibrator is a measurement of electrical parameters power meter calibration wiring judged as one of the high-precision test instrument. Product Characteristics 3-phase energy meter calibrator introduction: TKSX-3 handheld meter field calibrator is a measurement of electrical parameters power meter calibration wiring judged as one of the high-precision test instrument. 3-phase energy meter calibrator technical parameters: Input feature Voltage measuring range: 0 ~ 400V 57.7V 100V 220V 400V fourth gear automatic switching range. Current measuring range: 0 ~ 5A built-in transformer into 5A (CT) files. Clamp transformer for the 5A (small pliers) 25A (small pliers) 100A (the clamp) 500A (the clamp) 400A (tongs) 2000A (tongs) six stalls. (Including medium and large Clamp Meter is optional) Phase angle measuring range: 0 ~ 359.999 Frequency Measurement Range: 45 ~ 55Hz.