Composed Glaze

Dolomite is a carbonate mineral composed of calcium magnesium carbonate CaMg (CO3) 2. The term is also used to describe the sedimentary carbonate rock dolostone. we can make the crushed grain size as customer need, there is different analysis Uses Dolomite is used as 1- an ornamental stone, 2- a concrete aggregate, 3- a source of magnesium oxide and in the Pidgeon process 4- for the production of magnesium. 5- It is an important petroleum reservoir rock, 6- a flux for the smelting of iron and steel. 7- Large quantities of processed dolomite are used in the production of float glass. 8- production of frit for glaze. 9- added to soils and soilless potting mixes to lower their acidity and as a magnesium source. 10- the substrate in marine (saltwater) aquariums to help buffer changes in pH of the water. 11- one of the basic raw materials in the manufacture of flat glass, which are added by 12% as magnesium oxide helps add to the speed of the glass melting process. 12- in the manufacture of refractories due to the high melting temperature to 2800 ° C and therefore is used in the ovens foundries in Tlies containers. 13- used in the steel industry as well as used in furnaces making steel oxygen and furnaces arcs electric – 14- is also used in furnaces smelting to reduce the melting temperature of slag

Reference standard: ISO 3537 ROAD VEHICLES SAFETY GLAZING MATERIALS MECHANICAL TESTS Test purpose: Assessment of the minimum strength and cohesion of the safety glazing material under impact from a blunt, bulky object. Supporting fixturez: composed of two steel frames, with machined edges, 50mm wide, fitting one over the other and faced with rubber gaskets, the upper frame is pressed against the lower frame by at least eight bolts. Technical Data: Size: 1400mm*666mm*320mm Sample: 1100mm * 500mm Test height: less than or equal to 1.5 m Rubber pad: 15mm wide, 3mm thick, of hardness 70 Shore A

Safety Glass Impact Test Device - Headform Impact Test Device Related Standard: ISO 3537 Road vehicles â??Safety glazing materials â?? Mechanical tests â?? Clause 10 Head-form test Principle: Assessment of the minimum strength and cohesion of the safety glazing material under impact from a blunt, bulky object. If required, tests can be performed on whole windscreens. Application: The purpose of this test is to verify the compliance of glazing with the asking relating to the limitation of injury in the event of impact of the head against the windscreen, laminated glass and glazing of glass-plastic and rigid plastic other than windscreens, together with The double-glazed units used in the side windows. Technical Data: Head-form Weight: 10kg Head-form Size: 500mm*932mm Impact height: < 1.5m Samples size: 1100mm*500mmw Felt hat: 90g/89mm Thickness:5mm Frame size: 1376mm*670mm*320mm Apparatus: Head-form weight, with a spherical or semi-spherical head made of laminated hard wood covered with replaceable felt and without a cross-beam made of wood. Between the spherical part and the cross-beam, there is a neck-shaped intermediate piece and on the other side of the cross-beam, a mouning rod. The total mass of the apparatus shall be 10 kg�±0.2 kg Supporting fixture: for testing flat test piece, the fixture is composed of two steel frames, with machined edges, 50mm wide, fitting one over the other and faced with rubber gaskets 3mm�±0,5mm thick and 15mm�±1mm wide, of hardness 70 IRHD. The upper frame is pressed against the lower frame by at least eight bolts. The support shall rest on a rigid stand with a sheet of rubber, of hardness 70 IRHD and 3mm±0,5mm thick, placed in between.

About Potash Feldspar We offer impressive range of Potash Feldspar to our valuable clients. This Potash Feldspar is accurately composed to provide high end product. We conduct strict quality tests to assure that our buyers get the best of the output. It is high on demand owing to its high quality and purity. We provide Potash Feldspar in a comprehensive range which includes Potash feldspar Lumps and Potash Feldspar Powder. These can be availed at market leading prices. The Pottasium Feldspar Powder is widely demanded in various leading industries due to effectiveness in respective application. Moreover, the potash feldspar fine powder is easily delivered on timely basis and is also available at the most reasonable prices Feldspar is generally used for Ceramics, Glass, Electrodes.Used in making the body composition of several types of porcelain, china and earthenware and also in the preparation of glazes and enamel. As an important ingredient in the glass sand batch. We produce Potassium Feldspar in forms of : Analysis Potash-01 Potash-02 Silica SiO2 66% (+/- 1%) 68% (+/- 1%) Alumina Al2O3 18% (+/- 0.5%) 17% (+/- 0.5%) Potassium Oxide K2O 12.8% (+/- 1%) 10% (+/- 1%) Sodium Oxide Na2O 2% (+/- 1%) 3% (+/- 1%) Titanium Oxide TiO2 Nil Nil Calcium Oxide CaO Nil Nil Magnesium Oxide MgO Nil Nil Ferric Oxide Fe2O3 0.06% (+/- 0.01%) 0.08% (+/- 0.02%) Loss on Ignition LOI 0.1% 0.2% Granular Particles Powder (150-25 microns) Lumps form 1 inches to 15 inches

We are manufacturing best Quality calcite powder and various quality raw minerals in Calcite is very useful minerals and we provide best calcite minerals. Carbonate of Calcium known as Chalk Powder and Limestone Powder widely used mineral. Calcite powder in wide range with best rates. Various Striking Features: High dispensability, higher impact strength, Low oil absorption, Easy processing, Smooth surface finish and excellent dimensional stability. We offer highly pure and stable range of Calcite Powder that is composed of natural calcium carbonate. Calcite Powder is a natural form of Calcium Carbonate, purity and free flowing in nature. Various range in available calcite powder in India and we offer White Calcite Powder is used in plastics as filler, due to its high dispensability, easy processing, high impact resistance, low oil absorption smooth surface finish, compatibility with polymers, organic additives and magnificent dimensional solidity. We are one of the prominent Calcite Powder . Calcite displays an unusual predictable called retrograde solubility. We are reputed one of the important organization which is Natural Calcite Exporters in . The Calcite Mineral is naturally mined in the form of lumps. Calcite crush formed is using in filler in rubber and textile goods, used in the ceramics industry, preparation of glazes, manufacture of paint and distemper, manufacture of cement, metal polish, calcium carbide, transparent clear crystals used in the optical industry, use in optical instruments. The transfer of calcite can dramatically increase the porosity and permeable of the rock. In mining process the calcite is sorted out into various kinds of color grades. Calcite forms mineral coatings that cement existence rock grains together. Applications : Oil Exploration / Oil Drilling industry Plastics Rigid PVC Pipes LDPE Master Batches Paints, Inks, Powder Coating and Ceramic Welding Rods Automotive and Furniture Compounds. Rubber Industry Leather Cloth Industry As a flux in Glass Industry and in sizing of Textile Goods Coated Calcite Powder : We provide coating of Steric Acid on Calcite Powder. The Coated Calcium Carbonate powder is used in plastic compounds manufacturing to avoid moisture contains. Grades : Calcite powder is available from 100 Mesh to 700 Mesh. Calcium Carbonate is also available in granules size. Packing : Available in 25Kg, 50 Kg. 1000 kg, 1250 Kg & 1400Kg