A rotary burr is a rotating tool that is used for removing material. They are designed to rotate at a very high speed which enables it to manipulate the material it is working on. When working with metal, burrs are great for deburring, shaping and enlarging holes.
Categories - Surgical Products
MCP100-20PUK,Ascension MCP Distal MCP100-20D,1,230.14,230.14 MCP100-30PUK,Ascension MCP Distal MCP100-30D,1,488.47,488.47 MRH350 02UK,Ascension RH Stem size 2,1,316.36,316.36 MRH350 03UK,Ascension RH Stem size 3,2,316.36,632.72 MRH350 20L,Ascension RH Long MRH-350-20L,2,386.22,772.44 MRH350 30L,Ascension RH Std MRH-350 30S,2,460,920 MRH350 -22SUK,Ascension Radial Head MRH-350-22S,2,460,920 0s200020,Drill Bit 2MM,1,157.4,157.4 0s200145,QC Drill 4.5 x 145,3,173.8,521.4 0s208125,K-Wire 0.8mm x 125,2,37.1,74.2 0s292090,K-Wire SE 0.09,4,38.9,155.6 0s292160,K-Wire SE 1.6mm x 150mm,5,40.3,201.5 0s292220,K-Wire 2.0 x 200mm,8,40.3,322.4 04-c00109,Round Burr,4,82.75,331 04-c0607,Side Cutting Burr,11,33.95,373.45 b12-207,Cone Shaped Burr,2,133,266 KM3101,Command 2 Osc Saw Blade,1,47.55,47.55 KM3236,Saggittal Saw Blade,2,79.9,159.8 KM33-105,Micro Osc Saw Blade,2,49.8,99.6 ,,,, ,,,,23117.72 ,,,, Demo Equipment,Trade Show stand,,,950 ,Samples,,,500 ,,,, ,Total,,,24567.72
Product Description flow line of blood typing card 1. Introduction of product performance The flow line of blood typing card consists of 10 procedures, including automatic card arrangement and die-filling (i.e. arrange disorder cards into the same direction), automatic gel filling, automatic film feeding and sealing, automatic aluminum film forming via laser cutting, automatic centrifugation, automatic double-sided labeling, automatic detection, automatic boxing, automatic capping, automatic bar code scanning and QR code labeling, etc.; (1) Automatic card arrangement: arrange cards at the same direction via the vibrating disk, grasp the cards with the manipulator, place the cards into the mould after intelligent detection, ensure the card arrangement accuracy, and enter next procedure after full filling the mould with cards; (2) Automatic filling: stir the gel with stirring apparatus evenly, conduct multi-headed filling with the plunger pump, and different filling volumes can be set, with high accuracy and efficiency; (3) Automatic film feeding and sealing: deliver the aluminum film via servo system, with left and right deviation of the aluminum film controlled by the deviation rectifier, so as to ensure accurate film feeding length and left & right deviation, seal at high temperature after completion of film delivering, cool it down at low temperature after sealing, ensure the tightness of the blood typing card sealing, and avoid gel leakage; (4) Automatic aluminum foil forming via laser cutting: after sealing the blood typing card on the mould with aluminum foil, enter laser cutting aluminum foil mode, and laser cutting features high cutting speed, high efficiency, tidy cutting edges and beautiful appearance, without burrs. (5) Automatic centrifugation: the cards on mould automatically enter centrifugation station, place the mould automatically on the centrifugal machine fixture with the manipulator, so as to achieve automatic centrifugation; with adjustable and fast centrifugation speed, stable operation and no vibration; the gel card shall be without bubbles or wall-hanging liquid; Item Technical parameter Equipment capacity 3000-5000 pcs/h Overall power 20kw 380v 50HZ Specification of applicable card 6-hole card, 8-hole card Qualification rate of gel addition �99% Film feeding accuracy Front-back 0.1mm left-right ±0.5mm Labeling accuracy ±0.5~1mm Gas consumption Pressure of clean compressed air: 0.6-0.8Mpa Consumption 200L/min Overall boundary dimension 1250mm*2500mm*1850mm Overall weight Approx. 2600kg
