The bonded NdFeB magnets are mainly used for all kinds of small and micro-motors, such as spindle motors, stepping motors, synchronous motors, DC motors and brushless DC motors. It can replace sintered NdFeB magnet and ferrite, make motor assembling simpler and more reliable, reduce costs and improve efficiency. The bonded NdFeB magnets are made by mould pressing of the NdFeB alloy powder with epoxy resin, and also it can be made by injection or extrusion of NdFeB alloy powder with plastic. The characteristics are as follows:
1.Higher magnet property: the magnet property of bonded NdFeB magnets is between that of sintered NdFeB and Ferrite, and has good consistency and stability.
2.Large freedom of product shapes and high precision of dimension: the magnet shape and dimension are decided by the moulds, and the magnets can be shaped into ring, tile, block, etc. without further sintering and mechanical processing.
3.Good corrosion resistance: after electrophoresis or other special treatments, it can be used under normal or unfavorable conditions for a long time.
4.Diverse magnetization: multi-pole magnetization and skew-pole magnetization are available, and the field distribution could be square, sinusoidal and so on.
5.It has high production efficiency, and is suitable for mass production.
Supplier: Mould pressing bonded ndfeb magnets
Bonded-NdFeB Magnet.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Product Description Compression bonded magnets are made by using many isotropic Neodymium, Iron, and Boron materials, as well as crushed & powdered Samarium and Cobalt ingredients. Combinations of different elemental grades are used to create specific magnetic properties. Compression bonded magnets offers higher magnetic strength than injection molded magnets due to their higher magnetic particle density, but is unfortunately limited to simple geometric shapes due to the compaction process. The epoxy used is very resistant to normal industrial solvent and automotive fluids.The normal applications of these magnets range from below -40 and beyond 165. Why choose Bonded NdFeB Magnet.? 1. High quantity and even volume manufacturing, with up to millions of pieces per year. 2. High accuracy in size. The bonded magnet may be formed into magnetic components of relatively complicated shapes. 3. Single-time molding and multi-poles orientation. 4. The injection molded magnet has a high mechanical strength and may be molded together with other matching parts. 5. Effective surface treatment to prevent corrosion. Good corrosion-resistance and nice surface: The product is coated with epoxy resin parylene-coating and the anti-corrosion is very good. The surface is smooth, clean and nice-looking. No bubble, no crack, no strip-off, and no chip. 6. Stable working temperature. The working temperature is high up to 150. 7. Excellent magnetic properties. The energy product is 3 times as large as anisotropic ferrite. The intrinsic coercive force is high. During the large-scale production, the magnetic properties are stable and the conformity is good. 8. Application to Bonded NdFeB. Widely applied in all kinds of mini-motors, auto motors, air-conditioner motors,automatic controlling devices, sensors,drivers,telecom and instrument industry. Additional Info Brand: CBNB Transportation: Ocean,Land,Air Place of Origin: China
Hello! Thanks for reading our selling lead as follows. My name is Alex, a third-generation successor of family business group. We are experieced in the trading area and dealing with various products(such as electronic, plastic, rubber....etc.) in Asia until now. We also provide excellent Sintered NdFeB Magnet and Bonded NdFeB magnets for multipurposes. We have confident and want to mention our important principle again - we always pay more attention to the quality of products than customer itself. Please refer to our company profile in order to realize more or visit our website: http://www.sssmile.com.tw/English/main.asp Certificated by D-U-N-S(Dun & Bradstreet) https://www.directory.dnb.com/profiles/en/SUN-SMILE-CORPORATION-347529.html Thanks. Sun Smile Corporation Alex