Cryogenic Chamber uses a mechanical compressor to refrigerate to -120 C, replacing the traditional liquid nitrogen refrigeration method. It is mainly used in high-precision fields such as aerospace, military, electronic component testing, and high-end processing industry quenching processes.
Stainless Steel Thermal Shock Test Chamber 1. Principles and methods It uses the low temperature and high temperature storage hot trough, according to the movement need, uses the cylinder valve to switch the cold and hot air, thus achieves the fast temperature impact effect, balances the temperature control system (BTC) + the special design supply air circulation system, controls the SSR by the P.I.D. method, causes the heating amount of the system to be equal to the heat loss, therefore makes it long-term stable use. 2. Main Parameters 1. Performance: wind cooling type at room temperature ±25, no load. (1) Impact temperature range: - 40 ~ 150 (2) Temperature setting range of high temperature cell: + 60 ~ + 200 The temperature rise time of the high temperature tank is about 35 minutes from RT (room temperature) to + 200 degrees (room temperature + 10 ~ + 30). (3) The temperature setting range of cryogenic tank is from - 60 to - 10 . The cooling time of the cryogenic tank is from RT (room temperature) to -60 , which takes about 90 min (room temperature + 10 ~ + 30 ). (4) Laboratory temperature: - 40 - 100 (5) Temperature fluctuation: ±1 . (6) Temperature uniformity: ±2 . (7) Shock recovery time: - 40 ~ +100 takes about 3 minutes (no load), (high and low temperature shock isothermal time is more than 30 minutes each).
