Product Introduction
Silicone wound contact layer is a thin, flexible and non-adherent wound contact layer.
It consistis of a polyester mesh coated in soft silicone that is indicated for use with a secondary absorbent dressing on a wide range of wound types.
It is used to provide fixation and protection to the wound bed during dressing changes.
Features:
1. Provides a secure seal to wound sites to minimise risk of maceration.
2. Good transparency to allow for easy wound inspection without dressing removal.
3. Open mesh design enables excellent fluid management and transfer capabilities.
4. Promotes undisturbed wound healing â?? can remain secured for up to 14 days.
5. Non adhesive to moist wound and newly formed tissue, minimising trauma and discomfort.
6. Does not dry out and prevents sticking of a secondary dressings to the wound site.
A highly absorbent, multi-layered one-piece dressing,Five layer construction:Non-adherent wound contact layer. Stay-Dry Liner that parmits passage of wound drainage to keep peri-wound skin dry and prevent maceration at wound site.Center layer that absorbs wound drainage.Cellulose layer that wicks drainage horizontally along pad to increase dressing absorption capacity.Air-permeable backing for strength and durability.May be soaked with saline or topical agents prior to use.Rounded edges and tapered limb configurations conform to curved and hard-to-dress areas without unnecessary bulk.Ideal for protecting wound sites from further trauma.Soft pliability allows for range of motion exercises during recovery.Primary or secondary dressing
Absorbent Wound Dressing Size/Strength: Standard Dressings-4 x 6 ,6 x 9,9 x 15,15 x 18,15 x 24,4 x 9,3 x 3. Pads & Sheets-24 x 36,33 x 36,36 x 72,33 x 36, 36 x 72 Description A highly absorbent, multi-layered one-piece dressing,Five layer construction:Non-adherent wound contact layer. Stay-Dry Liner that parmits passage of wound drainage to keep peri-wound skin dry and prevent maceration at wound site.Center layer that absorbs wound drainage.Cellulose layer that wicks drainage horizontally along pad to increase dressing absorption capacity.Air-permeable backing for strength and durability.May be soaked with saline or topical agents prior to use.Rounded edges and tapered limb configurations conform to curved and hard-to-dress areas without unnecessary bulk.Ideal for protecting wound sites from further trauma.Soft pliability allows for range of motion exercises during recovery.Primary or secondary dressing.
Non-Adherent Wound Dressing(Winpad) Size/Strength: 2 x 2,4 x 4,4 x 8,7 x 7. Description A multi-layered, highly absorbent wound dressing.Gentle, non-woven rayon pad between two non-adhering polypropylene contact layers.Will not stick to wound site, damage fragile granulation tissue or traumatize wound upon removal.Non-linting.Absorbs significantly more drainage than similar dressings resulting in fewer dressing changes.Use in place of gauze and tape when more absorbency is needed . Primary or secondary dressing.
Paraffin Gauze Dressing / Tulle Dressing Product Code: ME 106 Specifications: Pouch Pack Size/Strength: 5cm x 5cm x 1â??s Pouch, 10cm x 10cm x 1â??s Pouch, 10cm x 10cm x 5â??s Pouch, 10 X 10 cm pack of 10 dressing, 10cm X 10cm X 30 Dressings, 10cm x 40cm x 30 Dressings Description Paraffin Gauze Dressings are used to dress denuded areas and hence these gauze are specially coated with soft paraffin jelly. The paraffin dressing, paraffin gauze dressing is non-adherent, non allergenic gamma sterilised, which helps in the speedy recovery of wounds. Used in the treatment of ulcers, burns, skin grafts (both donor and receptor sites) and various traumatic injuries. These paraffin dressing, paraffin gauze dressing are used directly over the contact layer. Facilitates air circulation and hastens healing. Sterilised by gamma radiation.
Product Introduction Bordered Silicone Foam Dressing is a highly absorbent self-adherent silicone foam dressing. It has unique structure: waterproof PU film, super absorbent fibers, super absorbent foam, silicone contact layer, PE release paper. Features: Waterproof Absorbs and retains exudate Reduces risk of maceration Self-adherent-no secondary fixation needed Low potential for skin irritation and allergy Can be lifted and adjusted without losing adherent properties Reduced pain and trauma at dressing changes
Non-bordered Silicone Foam Dressing is a superior absorbent dressing for moderate to high wound exudate management. It contains a highly absorbent foam pad and gentle adhesive silicone contact layer. Benefits: Supports moist wound healing Breathable, waterproof and bacteria resistant Absorbs exudate while minimizing the risk of maceration Comfortable and conformable Can be repeatedly applied, convenient for doctors to observe wound condition Easy removal Provides thermal insulation and protection Customized shape design to adapt to different demands;
WE ARE DIRECT TO TIER 1 DISTRIBUTOR / FACTORY OF SKYMED Type: Powder-Free Specification: Non-Sterile,Ambidextrous, Disposable Cuff: Beaded Surface : Smooth/Textured Color: Blue Main Material: Silicon free/Amide non detectable/DOP Non detectable/ Chloride Max 0.85mg/g REGULATORY COMPLIANCE & STANDARDS : FDA501K, ASTM 3578 -01 ae2, EN455 Part 1-3, ISO 9001, CE Contact for quote and payment terms
We can supply 3 Ply Disposal Face Mask for protect against Corona Virus with high quality, competitive price and short delivery by our best service. So please notice the following specification. - Commodity : 3 Ply Disposal Face Mask (With Nose Wire) - Origin : Republic of Korea. - Certificate of Quality : CE & ISO - Payment : Advanced 50% and 50% after receipt of Air Waybill by T/T. - Packing Method : 50 pcs in a inerbox and 60 innerbox to a carton. - Shipment : Within 25 days by Sea or Airfreight after receipt of advanced T/T for first shipment. - Capacity : 300,000,000pcs monthly. - Minimum Quantity : 100,000pcs monthly. - Loading Port : Port of Incheon or Busan, South Korea. - Specification - * Materials : Non-Woven spun-bonded fiberglass, Lace/Tie String. * Characteristic : Excellent breath ability, Non-irritation and Hypo-allergenic, Splash resistant, Ultra-sonic welding, Conforming to ASTM-1 Standards, Single Use. * Colours: Blue/Green/White. * Size : Blank Size: 175 x 95 mm (+- 5x2mm). Lace/Tie length - 400 mm * Face Mask Lace/Tie Dimension Upper Layer : 25 GSM PP Spunbonded (Blue) Middle Layer : 20 GSM PP Spunbonded (White) Inner Layer : 25 GSM PP Spunbonded (White) * Weight : 2.84g/pc - Above specification can be changeable according to situation of orders. If you have interests and any question for above specifications, please do not hesitate to get in touch with us in anytime. Then we will provide full information such as Offer Sheet based on attractive price with Photos and more data immediately. Thanks. * ps : We can also supply KN94, KN80, Surgical Mask, Infrared contact Less Thermometer, Sanitizer and Medical Glove Kinds. Best Regard Mr. Seong Ho, Cho/President
THIS PRODUCT INCLUDES 2 MASKS! Product Information: Proper size, fits perfectly to the user's face, dust-proof, anti-droplet. Consists of 3 specialized layers with great functions, limit bad factors to the maximum extent: Outer Layer: Cotton layer with diverse colors, suitable for people of all ages. Middle Layer: with exclusive anti-bacterial Nano Silver polyester padding layer. With Nano Silver technology, it acts as a safe filter to prevent the bacteria from entering the outer layer of the mask and to enhance the efficiency of anti-odor. Direct-Contact Layer: Anti-bacterial knitted fabric, soft, airy, the amount of bacteria is 100 times less than that of normal fabric, maintaining anti-bacterial protection for up to 30 washings. Material: - Outer cotton fabric soft, elegant colors - Antibacterial knitted fabric contact layer Packaging - Washable/reusable - One size fits most - Packed in plastic bags and with poster covers/insert (Made in Vietnam) Care Instructions: Step 1: Soak the face mask with a moderate amount of washing liquid and warm water for 10 minutes. Step 2: Gently rub the mask with warm water for 2-3 times Step 3: Hang the mask until it is dry To avoid wrinkles customers have ironed the mask for a better presentation.
