Float Collar And Float Shoe

Basic floating Equipment includes the Float Collar and Float Shoe:
The Float Shoe contains a backpressure valve that prevents fluids from entering the casing while the pipe is lowered into the hole and prevents cement from flowing back into the casing after placement, while enabling circulation down through the casing.
Float Collars are placed one to three joints above the Guide Shoe or Float Shoe. They provide a seat for the cement plugs, the bottom plug pumped ahead of the cement and the top plug behind the full volume of slurry. Once seated, the top plug shuts off fluid flow and prevents over-displacement of the cement. The space between the Float Shoe and the Float Collar provides a containment area to entrap the likely-contaminated fluids from the wiping action of the top cementing plug, securing the contaminated fluid away from the shoe where a strong cement bond is of primary importance. Float Collars include a backpressure valve and serve basically the same function as the Float Shoe.

Brass Ball Float Valve

Pressure Rating : PN-10

Material : Forged Brass

Description : Brass Lever with Plastic Ball

Ends : Screwed Female to BS:21

Item Code : FLB00066

Size : 15mm

Notes :

Available Valve Size : 15mm to 50mm

Floating Ball Valve

Gun Metal Ball Float Valve

Pressure Rating : PN-10

Material : Gun Metal

Description : Rough Body with Plastic Ball

Ends : Screwed Female to BS:21

Item Code : GM000066

Size : 15mm

Notes :

Available Valve Size
PN-10 15mm to 100mm
PN-16 15mm to 100mm
PN-20 15mm to 100mm
PN-25 15mm to 100mm

Cast Iron Equilibrium Float Valve

Pressure Rating : Class-125

Material : Cast Iron / Ductile Iron

Description : Double Beat Type, Rubber Seated

Trim : Cu Alloy, Copper Float

Ends : Flanged

Item Code : CI000052

Size : 40mm

Notes :

Available Valve Size : 40mm to 300mm

JHG offer high quality of EVA film
the main thickness is 0.38/0.50/0.76/1.52mm,
the width is from 2000-2450mm ,
avial colour is super transparent ,normal transparent, white,grey ,bronze ,green,red ,yellow ,purple .
The size and color also can be customized for big quantity inquiry.

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size �¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option