Nano Ceramic Coating

Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)

Nano Coat is a revolutionary, light cured, protective coating which effectively seals the surface to create smooth and glossy surface on the glass ionomer and composite restorations. It can also be used in difficult to polish areas such as posterior fissures or interproximal areas of indirect composite restorations. INDICATIONS Protects glass ionomer fillings from drying during the first hour after placement Increase wear resistance of restoration Glossy surface for composite resins

1. Providing nano-thin film deposition solution for customer's new product development and production 2. Providing from thin film material design suitable for products to simulation, process design, lay-out design, and production volume design 3. Through arrangement and design of equipment suitable for customer needs Provides an efficient and optimized system. Application: 1.R&D Application 2.Decorative Coating Application 3.Functional Coating Application 4. Special Coating Application

This is an aqueous, harmless nano-coating. It is silicone. Material: water-based silicone Usage: spray, brush, roller. This product can be used on the surface of concrete, brick, stone, wood, and plasterboard. Type: Nano superhydrophobic coating. Does not change the appearance. Colour: clear. Cover: 10 sqm/kg. If you have any questions please contact me.

Dyflon ceramic coating is produced by Sol-Gel method,it is liquid Ceramic.Main ingredients of ceramic coating are SiO2,Al2O3,TiO2 etc,the coating is compounds of inorganic substance in combination with physical and chemical structure,it is harmless to human, with excellent heat resistance,superior abrasion resistance and good nonstick. Also, emits much far-infrared radiation at high temperature,thus can make the dishes more tasty and good for health. Dyflon ceramic not only can be applied to cookware, but also widely apply to various industrial products such as hair straightener and heater etc.

Antimicrobial Helps in eliminating bacteria, viruses, mold and fungus. Self-Cleaning Constant sterilizing properties keeps the surface clean and safe. â?? Neutralize Microbes - Neutralizes microbes, indoor air pollutants and makes indoor healthier. â?? Cleaning Effectiveness- cleaning effectiveness is amazing and does not degrade even after many months of applications (12 months).Green and safe- certified by various international agencies, implies that this product conforms to strict environmental and safety standards.

Specification Appearance: light blue clear liquid Solvent type: methanol Crystal form:anatase Description 1.Air-cleaning;2. Self-cleaning;3. Anti-bacteria;4. Water-cleaning: purify the water pollution and the organic injurant in the water; 5.Increasing the concentration of minus oxygen hydronium: nanometered titanium dioxide can produce the minus oxygen hydronium under the sunshine as if the effect is produced by thunder strom to make the air much fresher. Application Use for textiles, wood board and other hydrophilic material, or use for surface treatment of base material can soakage with water; also can be added into painting and coating. Packing Plastic barrel in 5kg/20kg. Or upto customer's requirement. Plastic barrel in 5kg/20kg. Or upto customer's requirement.

We all know that rusting is a severe problem all over the world. The global cost of corrosion is estimated to be 3 to 4% of the global GDP. It is a huge global loss and still unnoticeable. Almost all the present technologies to stop corrosion are not able to deliver fool proof results & fail to stop rusting process especially fill form corrosion permanently.Hence everybody is fed up & looking for a one time and lifetime kind of solution. In this regard we have invented & introduced Steel Guard Nano Coat or 'SGNC' as a best Rust preventive and surface protection compound.It is a water based nano technological formulation made out of precious metals in nano form. And It is an absolutely GREEN product. It is to be applied on a cleaned and degreased iron surface before paints with suitable method. After application,It penetrates inside the surface and forms metallurgical monolithic bonds with iron molecules and creates an armor around it.During this process nobility of the surface is increased from ferrous to non ferrous and SGNC with concrete or sealer paint system on top of it stops water,oxygen and chloride ingress in the iron surface and stops corrosion process in it completely. Its unique features have made SGNC very much useful in almost all the industries. It can be applied on HR black, HR pickled, CR, MS casting or Machined iron surface after degreasing. It can be applied on TMT rebars in the construction process which increases the bond strength by two times. It delivers marvelous performance & replaces many current processes . ETP is not required. In marine application , it can act like a shop primer & keeps objects w/o rust if stored in a covered area up to relative humidity < 65 % & kept away from continuous water contact. It can be used as a rust remover + preventer on flash rusted components and can be used for touch up at dealer's end, repair shops or service centers. We can straight away eliminate shot blasting, galvanizing, 7 tanks phosphating or 13 tanks CED etc processes for fabricated assemblies, fasteners, flanges, pipes, riveting etc shelf components where FIFO can not be maintained and use of SGNC+1 or 2 coats of paint can have a good cost reduction. This can be used as touch up chemicals and to clear under warranty corrosion claims or for under maintenance components/ assemblies also. Weld ability is not a problem after SGNC application. The Treated surface delivers exceptional performance on the field.

Kristall Top Speed Coat will lock in liquid, bringing out colors and vibrancies that you have never seen on your vehicle before. In detail, this product revitalizes your paint using a super hydrophobic effect which at the same time boosts the surfaceâ??s gloss and darkness. This solution has a durability for up to 6 months.