Nominal Size SCH20 STD SCH40 SCH80 SCH120 SCH160
DN NPS
15 1/2 0.08 0.08 0.1
20 3/4 0.17 0.17 0.2
25 1 0.21 0.21 0.25 0.22
32 1 1/4 0.29 0.29 0.35
40 1 1/2 0.42 0.42 0.58 0.6
50 2 0.8 0.8 1.03 1.04
65 2 1/2 1.05 1.05 1.42 1.65
80 3 1.36 1.36 1.9
90 3 1/2 1.63 1.63 2.27 2.4
100 4 2.77 2.77 3.93 4.4
125 5 3.96 3.96 6 7.14
150 6 6.31 6.31 9.26 10.8
200 8 7.85 10.7 10.7 17.5 15 18.4
250 10 11.2 15.8 16.3 25.1 25.1 32.5
300 12 25.6 28.8 32.1 56.5 41.7 53.3
350 14 30.5 38.5 48.8 79 84.5 106
400 16 35.2 44.5 64.3 102 112 143
450 18 62.7 62.7 98.5 165
500 20 72.6 72.6 181
550 22 97 79.1 142 226
600 24 130 100
Ir Bal. Pt 0.002 Pd 0.001 Rh 0.003 Ru 0.001 Au 0.001 Ag 0.001 Fe 0.001 Cu 0.002 Application: 1. Iridium is the only precious metal thermocouple that can measure temperature up to 2100 C in the atmosphere because of its high temperature oxidation resistance and thermoelectric properties. Iridium can be used as a container material for radioactive heat source. Iridium anodic oxide film is a promising electrochromic material. Ir192 is a gamma ray source, which can be used for nondestructive testing and radiochemical therapy. Iridium is also an important alloying element; 2. Iridium powder/Iridium gold melting into gold can increase the weight, hardness and density of gold, generally adding about 5%~30%(K gold) of gold weight for mixed melting; 3. It is used for electronic pastes, reduce the sintering temperature of the electronic pastes; 4. It is used for welding of alloy, reduce the alloy melting point; 5. It's for in the alloy, improve the abrasion resistance of alloy; 6. It's for lubricants, improve the wear resistance of lubricating oil; 7. In the application of coatings, improve transparency and abrasion resistance, resistance to scratch and conductive ability;
Magnesium ingot Features: 1.Corrosion resistance and light weight. 2.The density of magnesium is 1.74g/cm3 which is even lighter than aluminum 2.7g/cm3, but mechanical strength and chemical stability are much better than aluminum. 3.Magnesium can be directly related to nitrogen, sulfur and halogen such as chemical combination, including hydrocarbons, aldehydes, alcohols, phenols, amines, grease and most of the oil pharmaceutical . Chemical composition : Mg Ingot Brand Chemical composition Mg Fe Si Ni Cu Al Cl Mn others Mg99.98 99.98 0.002 0.003 0.002 0.0005 0.004 -- 0.002 0.02 Mg99.96 99.96 0.004 0.004 0.0002 0.002 0.006 0.003 0.003 0.04 Mg99.95 99.95 0.004 0.005 0.0007 0.003 0.006 0.003 0.01 0.05 Mg99.9 99.9 0.04 0.01 0.001 0.004 0.02 0.005 0.03 0.1 Mg99.8 99.8 0.05 0.03 0.002 0.02 0.05 0.005 0.06 0.2 Application : 1.Magnesium alloys can be used to manufacture aircraft fuselages,engine parts, etc. 2.As strong reducing agent for titanium, zirconium, beryllium, uranium and hafnium production. 3. Magnesium metal is the main alloying element in aluminum alloy 4.Magnesium powder can be used as desulfurizer for steel making. 5. Magnesium also used to make photography and optical instruments, etc. 6.Can be used to produce magnesium fertilizer, promote the absorption and utilization of phosphorus by plants. 7.As an additive agent in conventional propellants and the production of nodular graphite in cast iron.
Monel 401 has excellent strength and plasticity, and has good pressure processing performance in both cold and hot states. It is a corrosion-resistant alloy with large dosage, wide application and excellent comprehensive performance. The alloy has excellent corrosion resistance in HF and F2 media, and is one of the few important materials that can withstand hydrofluoric acid. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. A kind of Monel alloy, its alloy structure is a high-strength single-phase solid solution, 3 a nickel-based alloy similar to Monel 400, and the corrosion resistance of the metal is fundamentally obtained by hindering the migration of charged particles through the discharge process of hydrogen ions. Obtained, the addition of 30% Cu by mass fraction minimizes the corrosion rate of TH, Ni in F, Cl and other halogen element ionic media, and the higher the Cu content, the better the resistance to sulfuric acid and phosphoric acid. Adding mass fraction to Monel 401 55% Cu improves the corrosion resistance of the alloy in reducing acids. Application fields: Wirewound Resistors bimetal contact Electrical and Electronic Applications Marine Engineering Chemical and Hydrocarbon Processing Equipment petrol and fresh water tanks Distiller degas heater Boiler feed water heaters and other heat exchangers Valves, pumps, shafts, fittings and fasteners Industrial heat exchanger Chlorinated solvents Crude distillation tower We can provide the following the form:Monel alloy401 coil; Monel alloy 401 strip;Monel alloy 401 plate; Monel alloy 401 sheets; Monel alloy 401 tube; Monel alloy 401 pipe;Monel alloy 401 flat; Monel alloy 401 bar UNS:N04401
Supplier: Lcm, metal parts, sanitary ware, gear reducer
Size and composition of a variety of high-quality single-uniform hybrid nano-copper-nickel composite powder can be controlled Application: 1. Metal nano-lubrication additives: add 0.1 to 0.3 percent from oil, grease, in the process of Moldova Moldova Sassafras Sassafras Vice self-lubricating surface, he studied Film, a significant reduction in the Mount Sassafras, deputy anti-wear friction-reducing properties. And a single metal nano-lubrication additives, to reduce the amount of powder by adding three to five times, to repair a short time, Mount Sassafras coefficient of small and long-term stability. 2. Block of metal nanocomposite materials used: inert gas protection of the powder sintering Preparation large copper-nickel metal nanocomposites. A plastic bag lined anti-static packaging, 100 ~ 1000g sub-bag.
Investment casting is one of the oldest manufacturing processes.Investment casting process was used mainly to reproduce metal parts and to reduce the time and labor needed for producing parts in quantity by metal smiths. Since then modern technology has made the metal smith basically extinct. The mould is made by making a pattern using wax or some other material that can be melted away. This wax pattern is dipped in refractory slurry and covered with stucco, which coats the wax pattern and forms a skin. This is dried and the process of dipping in the slurry, stuccoing and drying is repeated until a robust thickness is achieved.After this, the entire mould is placed in an oven and the wax is melted away. This leads to a mould cavity that can be filled with the molten metal. Check investment casting vs sand casting to learn more about investment casting... Due to the advantages of investment casting, it can be used to make parts that cannot be produced by normal manufacturing techniques, such as turbine compressor blades that have complex shapes, or airplane parts that have to withstand high temperatures.
Supplier: Scrap iron, train tracks, stainless steel, aluminum, copper, cast iron, metallic structure, motors, reducers, equipment, and machinery.
Supplier: Petrochemicals, marble, metal, steel, sponge iron, direct reduced iron, dri, ingots, hbi (hot briquetted iron)
Services: Logistics, sourcing
Aluminum alloying tablets are used to adjust the content of metallic element in the manufacture of high quality aluminum alloys, providing the following benefits: - high element recovery rate (typically over 95%) - rapid dissolution at normal casthouse operating temperatures - accurate and clean addition - concentrated form means reduced inventory, transport and storage costs. Two or three tablets wrapped directly by aluminum foil. 20kgs in a cardboard.