Features
1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle.
2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean.
Technical Data
Glass reaction vessel: 20L;
Jacket capacity: 6L;
High borosilicate glass 3.3;
Kettle body tolerable temperature: -80 to +200 degree;
Kettle body resistance to temperature difference: 90 degree;
Motor power: 90W;
Stirring speed: 50 to 500rpm;
Operating pressure(MPa): Vacuum or normal pressure.
Supplier: Steel scrap, rails for rerolling, shredded 210/211, hms 1 and 2 80/20, hms 1, steel turning, tire wire
Supplier: Solvent distillation plant , ethanol distillation plant , etp, water treatment plant , effluent treatment plant, evaporator , dryer, zld plant, lab equipment supplier, lab chemical supplier, industrial equipment , storage tank , bulk tank, petrochemical plant, ethyl acetate distillation plant, supplier of chemicals, reactor , pressure vessel , instruments, plc panel ,dcs panel, mcc panel , steam boiler, agitator tank, mixing tank, blending tank, bottling plant , vodka plant , ena distillation plant , fermentation plant , cooking plant, cpu plant, dg set, dpr report. etc, industrial dryer, industrial storage tanks, lab equipment, bio cng plant, biogas plant, bioreactor, sludge settling tank, wash settling tanks, pre fermenters, culture vessel, blender, blending tank, agitator, mixing tank, shell and tube heat exchanger, reboiler, reactor, mcc electrical panel, pressure vessel, evaporator, industrial dryer, beer plant, brewery plant, ethanol distillery , grain alcohol distiller plant
Supplier: Agriculture product and garment product, marine oil, ship engine oil low sulphur fuel, propulsion oil, high sulphur fuel, gl4 oil, water resistant oil, cycle rickshaw & thela, stabilizer, electronic voltage corrector
UB2005 SS Light weight guided type fall arrester made of stainless steel In built gravity lock to avoid incorrect use Two deliberate operation require to open and close built inrope guided wheel for tangle free movement with Anti panic feature conforms to ANI Z359.1 For price, specification and other details plese contact us
Maltodextrin consists of Dglucose units connected in chains of variable length. The glucose units are primarily linked with(1 - 4) glycosidic bonds. Maltodextrin is typically composed of a mixture of chains that vary from three to 17 glucose units long. Maltodextrins are classified by DE (dextrose equivalent) and have a DE between 3 and 20. The higher the DE value, the shorter the glucose chains, the higher the sweetness, the higher the solubility, and the lower heat resistance. Above DE 20, the European Union's CN code calls it glucose syrup; at DE 10 or lower the customs CN code nomenclature classifies maltodextrins as dextrins. For price, specification and other details please contact us
Supplier: Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Features 1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle. 2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean. Technical Data Glass reaction vessel: 30L; Jacket capacity: 10L; High borosilicate glass 3.3; Kettle body tolerable temperature: -80 to +200 degree; Kettle body resistance to temperature difference: 90 degree; Motor power: 90W; Stirring speed: 50 to 500rpm; Operating pressure(MPa): Vacuum or normal pressure.
Features 1. Reaction kettle can be lift up and down. It is convenient to feed materials and take the blocky crystals out of the kettle. 2. Reaction kettle can be rotated for 120 degree, it is convenient to use and clean. Technical Data Glass reaction vessel: 50L; Jacket capacity: 16L; High borosilicate glass 3.3; Kettle body tolerable temperature: -80 to +200 degree; Kettle body resistance to temperature difference: 90 degree; Motor power: 120W; Stirring speed: 50 to 500rpm; Operating pressure(MPa): Vacuum or normal pressure.
