Semi-coke is light black; characterized by high fixed carbon, high specific resistance, high chemical activity, low ash content, low sulfur and Low phosphorus. China Semi-coke is called "Lan coke"in Chinese, because of its blue flame when burning. Its has the similar construction with met coke, while the average price is only half the cost of met coke.
Semi coke (gas coke) is made of high quality Jurassic coal briquettes which can be found in the ShenFu coalfield. As a new type of carbon material, it has attractive properties of high fixed carbon, high specific resistivity, high chemical activity , low ash content, low Aluminum, low sulphur, and low phosphorus. It has gradually replaced metallurgical coke anthracite and charcoal. As an irreplaceable carbon material, it has been widely used in producing Calcium Carbide, Silicon Metal, Ferroalloy, Silicon Iron, Silicomanganese,
Carborundum, and so on. Moreover, it can also replace a fairly large number of anthracite and hard coke applications in the area of blast furnace injection, producing charring materials and activated carbon.
For metallurgical coke, we can supply based on the following range of specifications: Fixed carbon: 80%~86% Sulphur: 0.7%~1.0% Ash:13.5%~18% Volatile matter: 1.5% max. Moisture: 8%~15% Size is customized
Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel. Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze). Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal. We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under: Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality. Complete combustion of coking coals resulting in almost negligible levels of pollution. Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications. We are planning to develop new trends as far as improved coke quality is concerned. Completely RCC coal & coke yard which ensures that the coke quality is maintained. Exclusive mechanized machines for exact sizing and screening of coke. Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke. We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys. We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven. Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required. The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.
Petroleum Coke Product Description : Petroleum coke is a byproduct of the oil refinery industry. Petroleum coke refers to all types of carbonaceous solids obtained in petroleum processing, which includes green or raw, calcined and needle petroleum coke. Petroleum coke is used in many applications, including electrodes and anodes. It is also used as a fuel in the metal and brick industries. Price of product ( USD price or FOB price) : 10.000 MT monthly market price. 100.000 MT monthly market price Less 8%. Product origin : Russia and Non Russia Key Specifications/Special Features : Fuel Grade Petroleum coke of Low/High Sulphur. Calcium Petroleum coke, Graphitized Petroleum coke. Raw Petcoke, Anode Grade, Green Grade, Carbon Grade, Cement Grade, Needle coke, etc. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate. Item HQ-SGPC-01 Fixed carbon Sulphur 98.5% min. 0.1% max. Ash 0.7% max. Volatile matter Moisture Size(mm) HQ-SGPC-02 98.5% min. 0.2% max. 0.7% max. HQ-SGPC-03 98.5% min. 0.3% max. 0.7% max. HQ-SGPC-04 98% min. 0.5% max. 1% max. HQ-SGPC-05 98% min. 0.8% max. 1% max. 0.8% max. 0.5% max. 0.8% max. 0.5% max. Graphite Electrode Scrap(GES) Item Fixed carbon Sulphur Ash HQ-CPC-01 98.5% min. 0.5% max. 0.7% max. HQ-CPC-02 98.5% min. 0.8% max. 0.7% max. HQ-C PC -03 98.5% min. 1% max. 0.5% max. HQ-CPC-04 98.5% min. 2% max. 0.5% max. HQ-CPC-05 98.5% min. 3% max. 0.5% max. Size(mm) 1-3/1-5 1-5/30-60 1-3/5-20 1-5 0-2 Item Fixed carbon Sulphur Ash Volatile matter Moisture Size (mm) HQ-GES-01 99% min. 0.03%max. 0.5% max. 0.5% max. 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1 * Other sizes and specifications are available,please enquire - HENGQIAOCARBON 1% max. 1% max. 0.5% max. 0.5% max. 0.8% max. 0.5% max. 1-5 3-8 1-5 1-5 1-5 Green petroleum coke 144 shaft kiln for petcoke calcined 1% max. 0.5% max. Crush Sieving Packing Volatile matter Moisture 0.8% max. 0.5% max. 0.8% max. 0.5% max. 1% max. 0.5% max. 1% max. 0.5% max.
GREEN PET COKE Payment mode - 100% LC For price and specifications please email LOI with BCL. We can supply Petcoke from Russia. We deal in fuel grade , anode grade essar petcoke in large quantity. Russian Green Pet Coke Sulphur from 0.2 -0.6% Max and Fuel Grade Petrol Coke with Sulphur from 2.5 to 6% Max We can produce per customer required Spec's General Spec's attached for Each.
We are supplier and exporter of Petroleum Coke. Petroleum Coke are made from a mixing material of serval kinds of coal,under a high temperature(1300) process.They are widely used for steelmaking,ferroalloys manufacture or non-ferrous metals smelting,iron castings manufacture or other related metallurgical and foundry industry,because of its special physical and chemical characteristics:high strength and fixed carbon content,low sulfur and low volatile matter content.
Semi-coke is light black, characterized by high fixed carbon, high specific resistance, high chemical activity, low ash content, low sulfur and Low phosphorus It is wildly applied to such industries as chemical industry, metallurgic industry, and gas- making industry to produce calcium carbide, ferroalloy, ferrosilicon.
Moisture Content (as received) - 6.0 Moisture Content (after initial drying) - 0.7 Ash (after initial drying) - 0.3 Volatile Matter (after initial drying) - 10.9 Fixed Carbon (Calculated) - 88.1 Density-Vibrated Bulk(after initial dry) - 0.776 Total Sulfur (after initial drying) - 5.6 Hard Grove Grind ability Index (HGI) - 56 Gross Calorific Value (GCV) - 8390
Green Delayed Petroleum Coke Total Moisture -4,07 % wt Gross Calorific Value (Btu/Lb) 15018 (air dried) Ash -0.67%
