Underground Fault Cable Locator

Underground cable fault locator is my company in order to cater to the advent of the era of power the power industry in the integration of many high-quality goods package the cable fault testing industry with the rapid development of the IT era as an opportunity the single chip microcomputer and laptop type of cable fault tester on the basis of embedded computer platforms to create suitable for cable fault testing industry characteristics of network cable fault testing service platform and systematic integration of the USB communication technology touch screen technology 3 g communications technology greatly improve the function of the use of the instrument and the use value and convenient site environment operation.Considering the increasing number of buried cables;The system satisfy the People's Republic of China power industry standard "DL/T849.1 ~ DL/T849.3-2004" electric power equipment dedicated testing equipment general technical conditions the system test by the host system multiple pulse generator the path of cable fault locator and instrument of four parts used in power cable fault test path the embedding depth of cable for airport and railway signal control cable and street lamp accurate test of cable fault.

Thanks to the hard work of many engineers in the company the product has reached the international level especially since the whole set of devices has surpassed the world level in portability.The core technology of the multi-pulse method has changed the traditional testing method which has fundamentally solved the problem of high-resistance fault waveform reading that was difficult to solve previously. After multi-pulse generator any complex high-resistance waveform can be converted into a very familiar and easy to identify low-voltage pulse short-circuit fault waveform.It solves the problem that the user cannot recognize the complicated high resistance fault waveform for a long time and improves the level of the key rough measurement.

Underground cable fault locator is my company in order to cater to the advent of the era of power the power industry in the integration of many high-quality goods package the cable fault testing industry with the rapid development of the IT era as an opportunity the single chip microcomputer and laptop type of cable fault tester on the basis of embedded computer platforms to create suitable for cable fault testing industry characteristics of network cable fault testing service platform and systematic integration of the USB communication technology touch screen technology 3 g communications technology greatly improve the function of the use of the instrument and the use value and convenient site environment operation.Considering the increasing number of buried cables;The system satisfy the People's Republic of China power industry standard "DL/T849.1 ~ DL/T849.3-2004" electric power equipment dedicated testing equipment general technical conditions the system test by the host system multiple pulse generator the path of cable fault locator and instrument of four parts used in power cable fault test path the embedding depth of cable for airport and railway signal control cable and street lamp accurate test of cable fault.

Thanks to the hard work of many engineers in the company the product has reached the international level especially since the whole set of devices has surpassed the world level in portability.The core technology of the multi-pulse method has changed the traditional testing method which has fundamentally solved the problem of high-resistance fault waveform reading that was difficult to solve previously. After multi-pulse generator any complex high-resistance waveform can be converted into a very familiar and easy to identify low-voltage pulse short-circuit fault waveform.It solves the problem that the user cannot recognize the complicated high resistance fault waveform for a long time and improves the level of the key rough measurement.

Product Introduction
Underground cable fault locator is my company in order to cater to the advent of the era of power the power industry in the integration of many high-quality goods package the cable fault testing industry with the rapid development of the IT era as an opportunity the single chip microcomputer and laptop type of cable fault tester on the basis of embedded computer platforms to create suitable for cable fault testing industry characteristics of network cable fault testing service platform and systematic integration of the USB communication technology touch screen technology 3 g communications technology greatly improve the function of the use of the instrument and the use value and convenient site environment operation.Considering the increasing number of buried cables;The system satisfy the People's Republic of China power industry standard "DL/T849.1 ~ DL/T849.3-2004" electric power equipment dedicated testing equipment general technical conditions the system test by the host system multiple pulse generator the path of cable fault locator and instrument of four parts used in power cable fault test path the embedding depth of cable for airport and railway signal control cable and street lamp accurate test of cable fault.

Thanks to the hard work of many engineers in the company the product has reached the international level especially since the whole set of devices has surpassed the world level in portability.The core technology of the multi-pulse method has changed the traditional testing method which has fundamentally solved the problem of high-resistance fault waveform reading that was difficult to solve previously. After multi-pulse generator any complex high-resistance waveform can be converted into a very familiar and easy to identify low-voltage pulse short-circuit fault waveform.It solves the problem that the user cannot recognize the complicated high resistance fault waveform for a long time and improves the level of the key rough measurement.

Product Introduction
The normal operation of cable-communication and electric transport completely rely on the good condition of the cable-circuit. Once the circuit breaks down and without punctually examination and repairing it will no doubt trigger the mass economic loss and bad social influence. So the electric fault measuring testing instrument is a very important tool. The intellectual testing instrument uses multiple testing methods and adopts the most advanced electronic devices and with computer and special electronic technology combining our companyâ??s successful experience of long-time exploitation on cable-fault measuring testing instruments and it is absolutely of high tech intelligence and abundant functions.

Our cable-fault detector is a testing device of good integrity. It can test on the High Resistance Flashover Fault Grounding High and Low Resistance Fault Short & Off Circuit on the Cable Fault and Poor contact and etc. If being equipped with sounding method and locating instrument it can exactly detect the fault point. Furthermore it especially applies to test for various power cable and communication cable.

Product nickname Cable fault meter Power Cable Fault Teater Street Light Cable Fault Teater Cable fault finder Cable fault finder Portable cable fault location system Cable fault flash meter Geo Cable Fault Teater Cable Trailer Cable Fault Teater

Send InquiryCHAT NOW
Product Details
Product description

This cable fault tester is a comprehensive set of cable fault detection equipment. It can be used to detect flash-over cable fault, the earthing of the resistance, short circuit , cable break, and poor contact, with acoustic instrument, the exact location of the fault can be accurately detected. This tester is particularly suitable for testing voltage power cables and communication cables in various models and different levels



Applications and Uses

This tester can test various types of power cables (voltage 1KV ~ 35KV) and telephone cable, FM communication cables, coaxial cables, and the short circuit on the metal overhead cables, grounding, high resistance leakage, high impedance fault flash-over ,cables disconnection, and poor contact fault; and it can also test the length of the cable and the waveform transmission velocity.

The normal operation of cable-communication and electric transport completely rely on the good condition of the cable-circuit. Once the circuit breaks down and without punctually examination and repairing it will no doubt trigger the mass economic loss and bad social influence. So the electric fault measuring testing instrument is a very important tool. The intellectual testing instrument uses multiple testing methods and adopts the most advanced electronic devices and with computer and special electronic technology combining our companyâ??s successful experience of long-time exploitation on cable-fault measuring testing instruments and it is absolutely of high tech intelligence and abundant functions.

Our cable-fault detector is a testing device of good integrity. It can test on the High Resistance Flashover Fault Grounding High and Low Resistance Fault Short & Off Circuit on the Cable Fault and Poor contact and etc. If being equipped with sounding method and locating instrument it can exactly detect the fault point. Furthermore it especially applies to test for various power cable and communication cable.

Nimrof TARZ27-TFT Electronic Fault Locator is designed to complement conventional test instruments in the debug and troubleshooting process. Nimrof TARZ27-TFT Curve tracer is suited for todays varied signal circuit cards where Analog and Digital are mixed together. It provides to find faulty component on the electronic board in a short time by using power-off test method.

Nimrof TARZ27-TFT Curve tracer allows more than 10 various voltage combinations, it operates by applying a low current AC signal to two points of electronic equipment. The current flow appear a vertical signature deflection, while the applied voltage appear a horizontal deflection. Together they form a unique V/A signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.

Nimrof TARZ27 Electronic Fault Locator is designed to complement conventional test instruments in the debug and troubleshooting process. Nimrof TARZ27 Component tester is suited for todays varied signal circuit cards where Analog and Digital are mixed together. It provides to find faulty component on the electronic board in a short time by using power-off test method.

Nimrof TARZ27 Curve tracer allows more than 10 various voltage combinations, it operates by applying a low current AC signal to two points of electronic equipment. The current flow appear a vertical signature deflection, while the applied voltage appear a horizontal deflection. Together they form a unique V/A signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.

Product Overview
Adapts advanced technology TKGX Underground Cable Detector is the most effective device to detect underground utilities of gas electric power telecom water supply drainage cable television and etc.

Features
Portable designation suitable for wild field testing.

Full digital control easy to control.

English graphic display.

Transmitter designed with over load and overheating protection.

To detect the location and depth of underground cable accurately also is available for branch pipe or network construction underground cable.

Two detect methods: AC current gradient method and ground electric field method.

To locate and detect depth of underground cable synchronously.