Made by heating flat glass to approach its softening temperature and suddenly chilling with jets of cold air, which distributes compression stress on the glass, surfaces while tensile stress in the center. The counteraction of compression stress and tensile stress provides tempered glass times strength than normal glass.
Properties:
1. The mechanical strength redoubled: 4- 5 times strength than ordinary annealed glass. 2. Breakage hurts reduced: when breakage occurs, the tempered glass disintegrates into countless even small obtuse fragments, which reduces its hurts to human body.
3. It can withstand a very wide range of rapid temperature changing with the endurance of 200-300
Flat Maximum Size: 2440mm X 5000mm
Flat Mimum Size: 300mm X 300mm
Thickness: 3mm-22mm
Clear / Tinted / Low-Iron Toughened Glass
About Clear Tempered Glass Clear tempered glass, also toughened glass, hardened glass, reinforced glass, ESG glass, impact resistant glass, is fabricated by heating� clear float glass to over 600�°C and cooling it rapidly, which locks the outer surfaces of the glass in a state of high compression, and the core or center of the glass in compensating tension. It is a safety glass which is used when strength, thermal resistance and safety are important considerations. Clear Tempered Glass Characteristic High Strength The tempered glass performs well in resisting bending and hitting owing to its high strength which is 3-5times that of normal float glass. It is able to withstand a surface pressure of 95Mpa. High Safety When the tempered glass is broken, it turns into alveolate granules with obtuse angles, which guarantee safety to make sure human harmless, and the toughening process greatly reduces the risk of thermal breakage to ensure less loss. Heat Stability The tempered glass is capable of withstanding a temperature change of 250 to 320 while normal annealed glass can only bear 20 to 100 Clear Tempered Glass Specification Available size: Maximum 3000*8000 mm, Minimum 150*300 mm, any customized size. Beveling edges, cutting notches, drilling holes, grinding corners, etc. all could be done, but must be done before tempering. Edge work Any edges could be done perfectly on clear toughened glass, like flat polished edge (T edge), pencil edge (C edge), beveled edge, ogee edge, matt edge, corner round edge. Holes and notches Tempered glass can be supplied with drilled holes (no matter straight or conical) and cut notches. We will consider hole and notch locations and size according to your drawings. Clear Tempered Glass Application â?¢ Used in interior like bathroom glass shelves, glass partition walls, etc. Used in exterior like window glass, greenhouse glass, etc. Used on furniture like table top glass, cabinet door glass, etc. Many Others.
About 10mm Ultra Clear Tempered Glass from KXG building glass factory Ultra Clear Tempered glass, also called Low Iron Toughened Glass and extra clear toughened glass. It is made of heating ultra clear low iron glass to 650°C and cooling it rapidly. After this processing, the 10mm extra clear glass is stronger 4 to 5 times than before. It is a safety glass which is used when strength, thermal resistance and safety are important considerations. 10mm Extra Clear Tempered Glass Characteristic 1. High Strength Kunxing??glass??produce??a??lot??extra clear tempered glass performs well in resisting bending and hitting owing to its high strength which is about five times that of normal float glass. It is able to withstand a surface pressure of 95Mpa. 2. High Safety When the tempered glass is broken, the glass shard is small, which guarantee safety to make sure human harmless, and the toughening process greatly reduces the risk of thermal breakage to ensure less loss. 3. High Transparency Super high transparency and a neutral color making it the ideal glass where high visibility and clarity are required. 10mm low iron Tempered Glass Specification 10mm low iron ultra clear toughened glass available size: Maximum 3000*8000mm, Minimum 150*300mm All the processing done on the 10mm super clear toughened glass like polish edges, cut to size, drill holes, cut notches, cutouts, screen printing, acid etched, etc. must be done before tempering. Shapes Except flat 10mm ultra clear toughened glass,??Kunxing Glass also could do shape 12mm ultra clear toughened glass, like round low iron tempered glass, Trapezoid super white reinforced glass, parallel ultra clear safety glass, etc. 10mm Ultra Clear Tempered Glass Application Most often use as safety railing glass, high transparency aquarium glass, store front wall glass,??Kitchen??Splashback??Glass etc., and use to make??21.52mm low iron laminated glass to use as security stair railing glass, jumbo size balcony glass, elevator glass, etc., and make 10+10+10mm anti-slip laminated glass for floor, etc.
Tempered Glass 1.Tempered glass is produced by heating annealed glass in a furnace to 620 degree centigrade. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile. 2.It is 5 times stronger than annealed glass of the same thickness. 3. Stronger resistance to thermal breakage than annealed or heat strengthened glass 4. If breakage occurs the glass breaks up into small, cubical fragments, which are not threatening to humans. Fetures: -Suitable for use as a safety glass as defined by customer product safety association 16CFR1201,ANSI Z 97.1 1984 and BS 6262. -Conforms to CCC,AS/NZS2208-1996(Licence No: SMK40377 ),EN12150-1,and ASTM C1048,All work done on glass. Special processing: cutting, holes notching or edge working will-be made before heat treated. Application: -Curtain walls of buildings -Exterior and interior for buildings. -Showroom,lobby facades,escalator side plates,staircase handrails. -Viewing partions for sports complexes,resorts and airports.
Tempered glass also called toughened glass. After high-temperature heating and rapid cooling, the strength of the glass is increased. Longyang Glass can offer flat tempered glass and curved tempered glass. Almost all of the glass used in our life is toughened glass products, it makes our life more safe, such as windows and doors, shower door, home appliances, guardrail, greenhouse, solar panel, etc. Thickness 2mm-19mm, max size 3300x12000mm
Tempered glass is manufactured through heating common glass uniformly to the softening point and then quenching it, causing a strong permanent internal stress in the glass, of which the internal tensile stress and external compressive stress should be in a stable tress equilibrium in order to intensify the operational strength and load carrying capacity of the glass and enhance its wind pressure resistance, weatherability and shock resistance. With high strength and thermal stability, tempered glass can be widely applied to the places with special requirements on mechanical strength and security, such as glass curtain walls, balcony doors and windows, high-grade shop windows, shower rooms, household supplies, balustrade glass of escalators, glass partitions, the places where there are a dense crowd or humans are apt to contact with glass and vulnerable to physical injury (such as stadiums) or the places where are vulnerable to body shocks, such as doors and windows, curtain walls, automobiles, trains and ships and the places where are susceptible to the changes in temperature. Product Varieties: We can provide various types of flat/bent tempered glass with different substrate (including clear colourless glass, tinted glass, coated glass or patterned glass) according to requirements, such as balustrade glass, window and door glass, bathroom glass, staircase glass, furniture glass, decorative partition glass, desktop glass, automobile glass and furniture glass. The products will have better multiple excellent features after laminating and hollowing processing. Features: Security: tempered glass will be broken into small honeycombed obtuse grains due to the external force, and it will not result in serious bodily injury; High mechanical strength: high impact resistance and flexural strength, 3-5 times that of common glass; Thermal stability: tempered glass possesses superior thermal stability, which makes its(it) stand 3 times high temperature than common glass. Production Capacity: Maximum specification of flat tempered glass: 3300*15000mm; minimum specification: 85*245mm Maximum specification of bent tempered glass: 3660*2440mm, minimum specification: 600*400mm The minimum curvature of bent tempered glass: 1200mm Thickness: 4-19mm Output: 1.8 million square meters/year
Tempered glass (also known as Toughened glass) is a type of safety glass processed by uniform heat treatment to increase its mechanical strength and thermal impact strength compared with normal glass. Tempering puts the outer surfaces into compression and the interior into tension.Such stresses cause the glass, if fractured, to shatter into small, relatively harmless granular chunks. All fabrication, such as cutting to overall dimensions, edgework, drilled holes, notching, grinding, sandblasting, and etching, shall be performed prior to tempering. After the glass has been tempered, it shall not be modifified except as recommended by the fabricator.
SGP Laminated tempered Glass China factory, toughened laminated glass with 0.89mm,1.52mm,2.28mm SGP interlayer Sentry glass plus interlayer (SGP) for laminated safety glazing is the latest innovation in Dupont's family of glass laminating products, It extends the performance of laminated glass beyond current technologies. Sentry glass plus inter layer offers 5 times the tear strength and 100 times the rigidity of conventional PVB inter-layer. Because of its added strength, clarity, durability, fabrication and installation ease, it is an excellent candidate for demanding applications in the architectural market place. It can offer improved ballistic protection or thinner constructions than are now possible with conventional laminated glass. SGP laminated glass inter-layer tear strength is five times than the normal PVB, a hundred times  hardness for PVB ,is the best material for made Bullet-proof glass. SGP film with excellent adhesive strength of metal, can bond of online LOW E glass can be Energy-saving laminated glass, not only has anti sling security, but also with Low E glass energy saving function, possible to replace of Low E insulated glass.� Specification� Size: Max 3000*5000mm, Mini 300*300mm, any customized size could be produced. Thickness: glass substrates could be 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, etc.,SGP thickness 0.89mm, 1.52mm, 2.28mm,3.04mm, etc. Glass type: Clear float glass,â??low iron float glass/ ultra clear float glass,â??tempered glass, low-e glass, acid etched glass, screen-printed glass, etc.� SGP laminated glass characteristicsï¼?� 1. Compare with PVB laminated glass, the strength more higher, more transparent, the best configuration of super clear float glass 2. SGP laminated glass tearing strength is 5 times of PVB laminated glass 3. SGP laminated glass with high strength, can directly to use as the glass curtain wall structures 4.Can according to architectural design requires homogenization and heat soak process treatment SGP safety Laminated Glass Additional Attributes� Fragment retention if broken.� Meets safety glazing standards.� Hurricane protection Meets impact& cycling resistant standards. Intrusion resistance and forced entry The superiority SGP film compare PVB film SGP film laminated glass equivalent thickness = two glass panel plus PVB film laminated glass equivalent thickness = single panel glass x1.25
Toughened glass is a safety glass that has undergone processes of controlled thermal treatment to increase its strength. Also known as 'Tempered glass', toughened glass is made from annealed glass that has been heated to approximately 650â?°C and then rapidly cooled, making it four times stronger than ordinary glass. Due to the increased heat treatment and rapid cooling of the glass, the treatment produces different physical properties. This results in compressive stress on the surface and improved bending strength of the glass. Before toughening, the glass must be cut to the correct size or pressed to shape. The Process of Toughening The glass is carried by rollers and goes through the furnace. Three types of modes are used to heat the glass - conduction, convection, and radiation. While the rollers help to conduct the heat, the coils enable radiation of heat. This ensures that the glass is evenly heated on every side. By blasting air on both the surfaces, the heated glass is then cooled uniformly.