A soft natural color, UV-resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family This material combines good physical properties, chemical resistance and elasticity, and is designed for thin wall or complex profile extrusion applications This grade of TPV can be processed on conventional thermoplastics equipment for extrusion, injection molding It is polyolefin based and completely recyclable Compliant with RoHS Directive
V4 Borewell Submersible Pumpset Falcon Premium 100 mm (4) Borewell Submersible pump is firmly coupled to a submersible electric motor and Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP) - Version : Single Phase 160V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. Single Phase available in 0.5 HP to 5.0 HP Three Phase available in 1.0 HP to 6.0 HP - Speed : 2880 RPM - Head Range : 10 Mtr. To 340 Mtr. - Discharge Range : 450 LPM to 12 LPM - Outlet Size in Inch : 1.0 , 1.25, 1.5 & 2.0 - Degree of Protection : IP 58 - Direction of Rotation Minimum Cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph - Thrust Load : 0.37 kW â?? 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs, 2.2kW, 7.5 kW -1500 lbs. - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph Direct Online (D.O.L) - Maximum Starts Per Hour : 20 Times
V3 Borewell Submersible Pumpset Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification - Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP) - Version : Single Phase 160V to 230V, 50Hz, AC Supply - Speed : 2880 RPM - Head Range : 14 Mtr. to 96 Mtr. - Discharge Range : 70 LPM to 15 LPM - Outlet Size in Inch : 1.25" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m�²/sec (max.) - Ph Value : 6.5 to 8.5
V3 Borewell Submersible Pumpset Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification - Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP) - Version : Single Phase 160V to 230V, 50Hz, AC Supply - Speed : 2880 RPM - Head Range : 14 Mtr. to 96 Mtr. - Discharge Range : 70 LPM to 15 LPM - Outlet Size in Inch : 1.25" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Harbour construction Individual profiles on quay walls Fenders Wear plates and slides Floating docks Wear plates where dock meets pillage Bushings for pivots Fenders Slide Please do not hesitate to contact us should you have any questions. Plastic film and pallets
Made out of PVC material 16mil thickness (0.4mm) UV resistant Color: Red, Dark Green, Orange, etc Regular size: 6ft x 6ft & 8ft x 6ft This curtain is used to barricade the area where welding is carried. We can customize the size of blanket as per client requirements 8ft x6ft
Measurement of specific gravity density of cable material by solid density meter Wire and Cable Detection Equipment digital display density measuring instrument LJ-300A is the largest digital display density measuring instrument used by a large number of people at present. Its precision is one thousandth of that. Compared with the traditional densitometer, this machine is more convenient, faster and less time. The most remarkable feature of lj-300a is that it is accurate, easy to operate and stable and durable. This digital display density measuring instrument adopts integrated injection molding measuring frame. Integrated injection molding transparent water tank, professional, convenient, anti-corrosion, anti-fall, anti-break; The suspension line in water is made of 0.5mm stainless steel material, which does not bend or deform, and does not touch the tank vertically with the suspension column. Lj-300a is an economic solid state specific weight meter, which is mainly targeted at: rubber, plastic, wire and cable, electrical appliances, sports equipment, tires, glass products, hard alloy and new materials research laboratory. Lj-300a economic-type solid weight meter is based on ASTM D792, ASTM D297, GB/T1033, GB/T2951, GB/T3850, GB/T533, hg4-1468, JIS K6268, ISO 2781, and ISO 1183... Standard specifications. We are Cable Detection Equipment Supplier
5KV Power frequency high-voltage test console Wire and Cable Detection Equipment Power Frequency High Voltage Test Console The power frequency high-voltage test console is designed for finished low-voltage cables, which is composed of the console, a 50KVA induction regulator and an experimental transformer. It has a standard capacity of 50KVA and a voltage of 5KV. The low-voltage cable can generally withstand the voltage of 3.5KV, and the equipment can withstand the voltage of 5KV. The equipment is operated by electric control. In addition, high voltage will automatically return to zero in case of cable break and give a sound-light alarm and leakage protection, so as to protect the safety of the operator and the staff to the most extent. Main technical parameters of the system: Rate capacity 50kVA/ 100KVA/ 150KVA/ 200KVA Rated input voltage 380V Rated output voltage 0-5KV/ 0-10KV/ 0-15KV/ 0-20KV/0-25KV Main technical indicators: 1. It will automatically give an alarm (sound-light) and delay in cutting off high voltage (adjustable from 0.1-1S) in case of test piece breakdown. 2. Zero potential of voltage regulator is started under high voltage. 3. The voltage regulator automatically returns to zero after breakdown, overcurrent protection and non-zero tripping under high voltage. 4. Cut off the power source after the hold-off time is up and voltage automatically returns to zero at the step-up rate. 5. The hold-off time of digital display time relay is adjustable. 6. Measurement accuracy of high-voltage output and current output is +3%. ã??ã??When low-voltage wires are used in the power frequency withstand voltage test, the equipment with a voltage of 5KV and capacity of 50KVA is usually used. ã??ã??Voltage capacity may be customized according to customer needs. We are Cable Detection Equipment Supplier
Spark Breakdown Tester Wire and Cable Detection Equipment The SPARK TESTER is designed and manufactured in accordance with Standard GB/T3048.9-94 and Standard JB/T4278.10-93 on the basis of learning from similar products at home and abroad, and is suitable for the power frequency spark test on the insulation layer of rubber and plastic wires and cables. In addition, it is known as an important test equipment to ensure the insulation quality of wires and cables.ã?? The 25KV type power frequency SPARK TESTER meets the test requirements of the new national standard GB/T3048-2007, and is a professional equipment to detect wire, cable, insulation and sheath defects. It adopts the solid state AC voltage regulation and single-chip microprocessor control technology, characterized by stable output of high voltage (subject to no grid voltage change), high detection sensitivity, good field adaptability, convenient to use, safety and reliability and novel and beautiful structure. The tester is dedicated for the dielectic strength test on finished cables of insulation wires whose test voltage value is 25KV and below. Technical indicators Operating conditions of device Mains voltage AC220V±10% Detection voltage: Continuously adjustable Bead chain of inspection electrode: ø5mm (standard nickel plated bead chain) Mains frequency 50±2Hz High sensitivity: (600 uA) Detection mode: Online detection/winding detection Ambient temperature 0~40°C Maximum number of detected cables ø100MM/150MM Indicating method of breakdown: Counting function of breakdown number and bell alarm, and the breakdown point is obviously visible. We are Cable Detection Equipment Supplier 8Zinc layer weight test apparatus Weight detection of core layer of overhead aluminum stranded wire
JR-N wire winding and torsion testing machine is a testing machine used to test the toughness and adhesion performance of overhead stranded wire frame and (or) reinforced galvanized steel wire, which meets the requirements of GB/T3428-2002 Galvanized Steel Wire for Overhead Stranded Wire: Winding and Torsion Test.
