600-Amp 285 Series By ASCO Automatic Transfer Switch (120/240V Single-Phase)
Compatible with Briggs & Stratton Liquid Cooled generators
NEMA 3R Outdoor Rated Enclosure
Approved for indoor or outdoor installations
Standard Installation
Requires a sub-panel for overload protection
True Double-Throw Contacts w/ Inherent Mechanical Interlocking
Prevents connection of generator and utility source for maximum safety
Terminals For Connection of Neutral and Ground Conductors
Allows for easier installation
Convenient Control Interface w/ Symbols & Visual Indicators
Makes it easy to see transfer switch and power source status
Built-In Auxiliary Contacts For Switch Position Indication
Provides immediate indication when the switch positions changes
Additional Features:
Meets Article 702, NFPA-70 National Electric Code (NEC) Requirements
Listed to UL 1008 for optional standby systems
Please See Spec Sheet For Additional Compliance & Safety Standards
3-Year Limited Warranty
The Variable Speed Drive FRENIC series is equipped with functions and performance to meet all types of requirements, and in addition it is easily maintained and environmentally friendly. The series lineup ranges from simple to advanced-function models, enabling model choices matching situations for use. Fuji Electric provide Variable Speed Drives perfect for automating and with energy saving devices like a fan pump or carrier and variable speeds.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Honeywell BW Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. The first single-gas detector with the 1 Series sensor for CO, H2S and O2 Features & Benefits: User-friendly operation, Easy-to-read display for multiple languages, Lightweight convenience, Ease of maintenance, Serviceability, The new 1-Series sensor for enhanced reliability, Connected Bluetooth Low Energy (BLE) capabilities.
Nominal system voltage Rated current Rated power Rated reactance Rated reactance rate Mode of installation(horizontal or stacked) Working environment(indoors or outdoors) Angle between inlet and outlet
Alstom Gbcdg11af8101kch Idmt O/c Relay, Bss Curve,ac Series Trip Technical Specification Model No. Cdg11af8101kch Application O/c Burden / D.m.t 3va / 3 Secs. C.t. Secondary 5 Amp C.t. Case Size 1d V 10t Contacts (S/r or H/r) 2 N/o 2 N/c H/r E/f or U/v Setting Not Aplicable Flag Yes Frequency 50 Hz Mounting Flush O/c or O/v Setting 2.5 - 10 Amps. Name Plate-1 Rfg9126674 Outline Drawing Mfj012 Wiring Diagram Madz821-17
ALSTOM GBCDG11AF8104KCH INV.TIME O/C OR E/F RELAY FOR AC SERIES Technical Specifications Model No : CDG11AF8104K(M) CDG11 S/T APPLICATION - E/F BURDEN / D.M.T - 3 VA / 3 SECS. C.T. SECONDARY - 5 AMP C.T. CASE SIZE - 1D V 10T CONTACTS (S/R OR H/R) - 2 N/O 2 N/C H/R E/F OR U/V SETTING - 0.5 - 2 Amps. FLAG - YES FREQUENCY - 50 HZ MOUNTING - FLUSH O/C OR O/V SETTING - NOT APPLICABLE Name Plate RFG9126695 Outline Diagram MFJ012 Wiring Diagram MADZ821-17
Supplier: Dry type air core series reactor, dry type air core current limiting reactor, dry type air core filter reactor, dry type air core shunt reactor, dry type air core smoothing reactor
Woodward Easygen 3000 XT Genset Controller, 12-24 V DC, IP Rating: IP20 Woodward Easygen 5000 XT Genset Controller, 12-24 V DC, IP Rating: IP20 Woodward raised the standard in genset paralleling control and power management system with the easYgen3000XT Series controllers. These controllers come with standardized software that is simple to configure, yet easily customized for individual applications. Enhanced connectivity enables fast and secure interfacing to other controls and communications systems while the enhanced hardware is a drop-in replacement for previous generation easYgen-3000 Series Controls.
10 To 40 Degree C Stainless Steel K Type Thermocouples, For Industrial IN tune with diversified applications, we are engaged in offering an excellent quality K Type Thermocouples. Our offered thermocouples are manufactured with precision using advance techniques in order to meet various needs of customers. Additionally, a series of quality tests are performed by our quality controllers on these thermocouples so as to eradicate any defect from this range.
