The HOBO Occupancy & Light data logger monitors room occupancy and indoor light changes to identify occupancy patterns and determine energy usage and potential savings. The HOBO UX90-005 Room Occupancy/Light Data Logger is available in a standard 128 KB memory model (UX90-005) capable of 84,650 measurements and an expanded 512KB memory version (UX90-005M) capable of over 346,795 measurements.
Product Features: 1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 1 Small size and light weight, Maintenance-free 2 Environmental protection and pollution-free materials, no heavy 3 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 4 Built-in BMS management system with comprehensive protection and monitoring control functions 5 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 6 Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable
1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 10 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 11 Built-in BMS management system with comprehensive protection and monitoring control functions 12 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 13 Main control MCU can be centrally controlled and manage peripheral settings (AC charger, inverter, solar charger) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable
Supplier: Ac Drives, Servo Drives, Hvac Drives, Electric Motor And Gearboxes, Hmi And Touch Panel, Hydraulics And Pneumatics, Sensors, Vfd Control Panel, Plc Control Panel, Servo Control Panel, Scada Control Panel, Dsc Control Panel
1) 5 Ports charger station+ wireless charger: 2) Material: ABS+PC refractory material 3)USB portï¼?5 USB+1 wireless charger , two in one 4) Input parameterï¼?~100-240V, 50/60Hz(Wide voltage broadband, global application) 5) Total parameterï¼?DC5Vï¼?7A Total 6) Wireless charging powerï¼?5W 7)Rated powerï¼? 35W 8) Charging rateï¼?no less than 85%ï¼?High conversion rate, small heat, similar product 9) charging rate usually less than 80% 10) With EMC, EMI anti-electromagnetic interference module: avoid interference 11) phenomenon when charging. 12) Overcurrent protection: ensure safe and reliable charging 13) Smart ID chip: compatible with all ios, android and other USB charging devices. Adopt ETL certified power cord, produced by professional factory. 14) warranty: one year (free replenishment if quality problem occurs within one year).This product has passed QI, CE, Rohs certification and ilac ul60950-1 certification test 15) Colorï¼?Black/ white
* 5 Ports charger station+ wireless charger. * Material: ABS+PC refractory material. * USB portï¼?6 portsï¼?It can charge 6 devices at the same time. *Input parameterï¼?~100-240V, 50/60Hz(Wide voltage broadband, global application). * Total parameterï¼?DC5Vï¼?7A Total. * Wireless charging powerï¼?5W. * Rated powerï¼? 40W. * Charging rateï¼?no less than 85%ï¼?High conversion rate, small heat, similar product charging rate usually less than 80%. * With EMC, EMI anti-electromagnetic interference module: avoid interference phenomenon when charging. * Overcurrent protection: ensure safe and reliable charging. * Smart ID chip: compatible with all ios, android and other USB charging devices. Adopt ETL certified power cord, produced by professional factory. * Warranty: one year (free replenishment if quality problem occurs within one year).This product has passed QI, CE. Rohs certification and ilac ul60950-1 certification test. * Colorï¼?Black/ white.
Supplier: Mitsubishi : fx & a/q series plc, Servo mr-j2s/mr-j3, transducer, touch screen, omron PLC, Siemens :s7-200. 300. 400 series PLC, Rockwell - AB series PLC, Panasonic(sunx) :VFD series PLC, inverter and sensors, Yaskawa : inverter
Supplier: Frequency Inverter , Servo Drives, Plc, And Sensors
Buyer: Electronic Scrap
Specification Voltage: AC 250V Rated current:13A IP grade: IP20 Cover plate: SUS304+PC Frame: PC Base: PA66+25% glass fiber Fixing screw: M3.5*P0.6*24mm Test/Normal operation: Switch:15000 times;Socket:15000 times USB Function description: 1.Input 220-240V 50/60Hz; Output: DC 5V Max 2100mA 2.Environment InteriorTemperature:-5t -39t 3.Charge your Phones, Pads MP3 and Digital Cameras. Also suitable for other USB chargeable device Mounting box depth: 35mm