Video/radio signal surge protective device is designed according to the IEC standard and national standard. It can be used for single BNC terminal, 16 BNC terminals, F terminal and N terminal lightning protection.
This product is suitable for the monitoring system BNC terminal, matrix BNC terminal, optical transceiver BNC terminal, video camera BNC terminal as lightning surge protection.
This product is produced according to the discharging, clamping, filtering principles, that realized high efficient discharging lightning currents and resistance of EMP shock which caused by lightning currents. It has advantages of multi classesâ?? protection, extremely low residual voltage, perfect transmission performance, quick respond, large discharging capacity, simple installation and connection, easy maintenance.
DK Company can produce this product with different classes working voltage and various number of terminals according to the customer requirement. The 8/20us maximum discharging currents (Imax) can reach 10kA.
Supplier: Sugar, urea and rock phosphate, Ductile iron pipes and fittings, carbon steel pipes and fittings, surge arresters and composite insulators (11 223 kv), heavy machinery attachments for excavators and skid loaders, fuel oil, pet coke and iron pellets, aerosol fire suppression devices
Services: Consultancy services, business set up, facilitating, brokerage, contracting for electromechanical work in abu dhabi
Buyer: Lithium carbonate
Floating cable which can be applied to underwater robot equipment, either in fresh water environment or in seawater environment. It is widely used in marine exploration robot, underwater ROV UAV remote control submersible, underwater camera, underwater construction, underwater search and rescue robot, pipeline detection robot, submersible pump and the link between various underwater electrical equipment and shore based equipment; Link of signal transmission, power supply and equipment control system from underwater to water.
Flat Cable M&P is able to support a full line of flat cable and flat ribbon cable for electronic applications. Providing both power and data transmissions, flat cables are mainly used for internal connections within the equipment. They are available in a wide range of configurations to accommodate different connection and data transmission requirements and the range of sizes of the equipment using the cables. Flat cables provide consistent performance due to their layout and the spacing between the cables and are lighter, thinner and more flexible than other cables. Features of Our Flat Cables & Wire * Flat, ribbon and twisted configurations, with different levels of flexibility. * Shielded or jacketed cable to reduce signal interference. * Range of pitches and pin configurations to accommodate the application requirements. * Easy to fasten with clamps, adhesive, and tape. We provide custom services, including marking, kitting and custom cable design to provide you with a custom solution for your cabling application. Contact us to find out more about Flat Cables and Wires.
Photocells Fans & ventilation, Hazardous area lighting Industrial plugs & sockets Industrial & commercial Lamps Light fittings: fluorescent, weatherproof & floodlighting Refrigeration & air conditioning spares Water heating elements Wiring accessories MCB's Circuit breaker Vacuum Breakers Control transformers Fuses & load break devices Hazardous area products Industrial beacons Industrial sounders, buzzers Industrial surge protection Safety switches Clamp meters Multi-meters Testers Semiconductors: thyristors, rectifiers Pressure switches Solenoid & pilot valves Photoelectric Sensors
Video signal arrestor Applications: Designed for monitor device not to be spoiled by lightning over-voltage, induced over-voltage and static discharge. Video camera E1, pdh, sdh, spdh Digital hard disk video cassette recorder Industrial control Features: Multi. Protection circuits, gas-tube+ tvs technology Dual protection in common module and different module Tvs array technology, low capacitance Multi-strike capability Specifications: Type d12bf d12bf-4d12bf-16 Electrical specifications Impedance75++ Max operating voltage12v Nominal discharge current (8/20++s)3ka Max. Discharge current (8/20++s)5ka Protection level (3ka 8/20++s) Line to line40v Line to pe160v Adapt transmission rate100mbps Insertion lossf 0.5db Response time f 5ns Mechanical specifications Connectorbnc female to malebnc female to female Number of protection ports1416 Diamension (mm)82.7*25*25130*73*25 481*84*47 Working environments Operating temperature minimum-40 Operating temperature maximum85 Operating humidity95%
Application :- The XLPE (Cross Link Poly Ethylene) Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with XLPE compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The outer sheaths can be PVC, HR PVC, FRLS or FR depending upon the application and requirement. Technical Advantage of XLPE Insulation :- Higher current rating, higher short circuit rating (approx 1.2 times that of PVC), thermosetting in nature, higher insulation resistance (1000 times more than PVC cables), higher moisture resistance, better resistance to surge currents, low dielectric losses, better resistance to chemicals and corrosion, longer service life. Comparatively higher cable operating temperature 90�°C and short circuit temperature 250�°C. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +90�°C Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:7098 (Part-1) Packing : 500 / 1000 meters on drums
* 1P, 2P, 3P, 4P optional * Uc: 420V * In: 10KA * Imax: 20KA * Customized available
Mine detection cable is mainly used in various oil and gas Wells with Oil well wax removal, viscosity reduction and coagulation reduction, coring and well logging, perforation etc., can also be used in ocean research and river, harbor, water conservancy hydrological measurement, as well as coal field geological prospecting, geothermal well logging, etc.,The detection cable is connected with the sensor and the signal terminal, which has a strong anti-interference signal transmission function.
Instrumentation circuits cable is used for computer based automatic control system, especially for computer distributed control system, transmission of production device process variable detection, control, interlocking, alarm lamp analog and digital signals, the product has excellent anti-interference performance, long-term working temperature -40~105.
