Horizontal Cantilever J518

1.5 1B-TH Slurry Pump is end-suction, split-case, centrifugal slurry pumps have set the world standard for heavy duty abrasive pumping applications. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, Application customization comes standard with this line by applying a wide variety of metallic and elastomeric parts options, an assortment of seal arrangements, and a standard impeller adjustment mechanism incorporated into every base assembly. Slurry Pump Design Features Slurry Pump wet parts are made of wear-resistant high chromium alloy. Slurry Pump bearing assembly use cylindrical structure, adjusting the space between impeller and front liner easily. They can be removed completely when being repaired. Bearing assembly use grease lubrication. International famous bearing The shaft seal could use the packing seal, expeller seal and mechanical seal for all slurry pump. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications at its working site. There are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency. The slurry pump can be installed in multistage series to meet the delivery for long distance.

The L series slurry pumps are cantilevered, horizontal, centrifugal, slurry pumps. They are suitable for delivering less abrasive, low dense slurry in the metallurgical, mining, coal and construction material industry. The shaft seal is adopted both gland seal and centrifugal seal. The L series slurry pumps have a high rate of revolution and small volume saving floor area. The frame plates have changeable, wear-resistant metal liners or rubber liners upon request and the impellers are made of wear-resistant metal or rubber. The discharge branch can be oriented to any of the eight different positions for installation and application upon request.

Slurry pump Slurry pump is contain cantilever and horizontal centrifugal pumps, which apply to transport slurry with strong corrosion proof and high concentration for such industries as metallurgy, mine, coal, power, buliding etc.This kind of pump can be used in multi stages.Pump body consist of replaceable metal or rubber lining and its impeller is made of wear resistant metal or rubber.The shaft seal of pump may adopt packing seal centrifugal. Contact us  company:shijiazhuang ruite pump co., ltd. -

Product Description Introduction: WN dredging pump is a new type of sludge pump, aiming at rivers and seas out of repair. WN dredging pump is a single-stage single suction cantilever horizontal centrifugal pump. Specification Item Dredging pump factory price WN series sand suction dredging pump for sale Model WN Material Alloy cast iron, alloy steel and customized Color White and adjustable Seal Soft packing seal or mechanical seal Speed 120r/min~~~1400r/min Theory Centrifugal pump Structure Single stage pump Outlet diameter 100-1200mm Capacity 180-22000m3/h Head 20-80m Warranty 1year Certificate ISO9001 Applications Delivering gravel Digging mud Filling harbor in rive Sea all over the country Petrochemical Dredging Other industrial departments, etc. factory produce high sale Ruite Brand Slurry Pump Product Feature The structure of 200WN to 500WN type dredging pump is single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil. The structure of 600WN to 1000WN type dredging pump is double-casing, single-stage, single suction, cantilever and horizontal. It has self-carrying bracket. Lubrication is forced thin oil lubricating. The double-casing design can ensure the liner can work till it is worn out, and if the liner crack, water can not enter into the pump. factory produce high sale Ruite Brand Slurry Pump factory produce high sale Ruite Brand Slurry Pump With years experence in manufacturing and service, now we exported the pumps to Eastern Europe, Africa, and Asia.They all sales well for their durability and energy-saving property. Centrifugal pump for mining is contain cantilever and horizontal centrifugal pumps,which apply to transport slurry with strong corrosion proof and high concentration for such industries as Metallurgy,mine,coal,power,building etc.This kind of pump can be used in multi stages.

Wzj model for the single-stage, single-suction, cantilevered horizontal centrifugal slurry pump, this series pump adopt international advanced solid-liquid two-phase flow theory, according to the principle of minimum loss design. The over-current components geometry conforms to the flow of the medium, to reduce the eddy current and impact, so as to reduce the flow components of wear, improved the hydraulic efficiency, reduce the running noise and vibration;

Introduction: WN dredging pump is a new type of sludge pump, aiming at rivers and seas out of repair. WN dredging pump is a single-stage single suction cantilever horizontal centrifugal pump. Product Feature The structure of 200WN to 500WN type dredging pump is single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil. The structure of 600WN to 1000WN type dredging pump is double-casing, single-stage, single suction, cantilever and horizontal. It has self-carrying bracket. Lubrication is forced thin oil lubricating. The double-casing design can ensure the liner can work till it is worn out, and if the liner crack, water can not enter into the pump. Electric single-suction 700WN dredge pump Electric single-suction 700WN dredge pump Qaulity Control We have our own casting factory,so that we control the qaulity from raw material.We take sample to do chemical test before casting and do another test during casting to confirm the right percentage of all components.And casting,we would do physical test and spectrum analysis when and after assembling pumps.We do impeller dynamic and static balance,bearing test,roto test to test noise,vibration,shaft.Also we have paiting hourse to paint pumps. Company Information Shijiazhuang Ruite Pump Co., Ltd supplying a precision range of pumps including slurry pump (horizontal and vertical) chemical pump (desulfurization pump), sand pump, and all kinds of pumps parts. With years experence in manufacturing and service, now we exported the pumps to Eastern Europe, Africa, and Asia.They all sales well for their durability and energy-saving property. Centrifugal pump for mining is contain cantilever and horizontal centrifugal pumps,which apply to transport slurry with strong corrosion proof and high concentration for such industries as Metallurgy,mine,coal,power,building etc.This kind of pump can be used in multi stages. FAQ 1.Are you a trading company or manufacture? We are Professional Slurry Pump Manufacturers. And welcome to our factory to see our product line and our pump quality. 2..we don't know which model we need ,can you help us ? yes, please let us know the pump capacity ,head , then we can help you to calculate . 3.Is your price the best ? You get what you pay off. We supply high effiency good performance slurry pump. 4.What is the best delivery time? Within 20 days. 5. Warranty Period? One year, except spare parts

Gravel and sand pumps for sales : 1.Horizontal, cantilevered, centrifugal, single stage slurry pump 2.Long bearing life: the bearing assembly is with large diameter shaft and short overhang. 3. Wear resistant and anti-abrasion wet parts: a05, a07, a33, a49 and rubber etc. They are completely interchangeable with each other 4. Easily replaceable liners: liners are bolted to the casing. 5. Easy adjustment of impeller: an impeller adjustment mechanism is provided below the bearing housing. 6. Simple maintenance throat-bush: the mating face of the throat bush is tapered, so the wear is reduced and removal is simple. Main parameter:mg150e

Series lrh slurry pumps are cantilevered, horizontal, centrifugal with double casings. They are designed for the handling of highly abrasive, high-density slurries. Structure: the wet parts of this pump are made of natural rubber, which could be replaceable wear-resistant parts. The discharge side can be oriented to any of the eight different positions. The shaft seals may adopt packing gland seal, expeller seal and mechanical seal. Application: series lrh slurry pump mainly applies in the metallurgy, mining, coal washery, power plant, building material and other industries. This pump can be installed in multistage series.

Introduction: Series lmhh slurry pumps are cantilevered, horizontal and centrifugal. The main feature of this series is to transport the slurry for high pressure. Because of its high speed, only metal lined pump could meet the design requirements and the rubber not. Structure: the wet parts of lmhh pump are made of wear-resistant alloy. The shaft seals for series lmhh may be packing seal and expeller seal. The discharge side can be oriented to any of the eight positions to suit installations and applications. Application: they are designed for the handling of highly abrasive, high density slurries in the metallurgical, mining, coal, power generation, construction material and other industry. The pumps could be also installed in multistage series for long delivery Packing: plywood case