Graphtec Data Logger I

Temptale Ultra USB Temperature Datalogger - USED CTS000035

daq modules and standalone systems with 48 channels and 1sec sampling rate

Serial Data Logger is an easy to add data storage to any device or system. The SDL-01 is a compact, rugged device that captures data from any device equipped with a serial port and stores it in FAT16 to FAT32 compatible files on a Secure Digital card. It also has an USB port with standard Mass storage driver, which can emulate the device as USB pen drive, for retrieving the files. Features: • Low-power consumption • Low-cost • Built in RTC • Standalone unit • USB Mass storage Port • Industrial real-time export capabilities. • Support text, raw, binary data and protocols • Use any baud rate, number of data bits or stop bits, parity, hardware and software flow control. • Programming is not required to configure the software to collect data.

Elpro Libero Ti1 ELPRO-BUCHS AG Temperature Data Logger No validation date appear (It seems like it expired on 2020) but as far as i know even when the validation time has expired, you can still reprogram it and you'll need to add a new battery. Sold without any driver or software. No other tests were made. Please look at the detailed photo labels for more information. Highly preserved! Sold as seen in the photos. Weight 35g. As-is.

Model:S273 Name:GSM 3G M2M RTU (8DI+6AI+4DO+1TH+1USB+1RS232/485+64Registers) The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications. Mainly Features: 1. ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system; 2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery; 3. 4G SD card for save historical data, USB port for configuration and upgrade firmware; 4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA; 5. 4 Relay outputs, 5A/30VDC,5A/250VAC; 6. 8 digital inputs, dry contact or level input. One of the input can be used as counter; 7. 1 temperature probe input, 1 humidity transducer input; 8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection; 9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network; 10. RS232/RS485 can performs Modbus RTU Master, Modbus RTU Slave, supports 01,02,03,04,05 code, up to 64 registers, the register arise alarm also can send SMS to alert; 11. RS232/485 can be used as data transparent transmission for different intelligent meters or PLC; 12. Automatically resend the data while communication failure, GPRS failure will alert by SMS text; 13. Supports remotely restart the RTU, and configure it by SMS commands remotely; 14. Supports over voltage protection and phase-reversal protection; 15. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message. 16. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.

Model: S262 S263 Name: GSM GPRS 3G Data Logger The GPRS 3G Logger is special for remote monitoring temperature, humidity, current, voltage, fuel level, pressure, air condition parameters and so on, it can setup ultra-high—high, low—ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly. 1. Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 2. Programmable by SMS Commands or PC Configurator via USB; 3. 2 alternate Server via GPRS/3G wireless network, supports IP address and DNS; 4. Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS; 5. GPS module is optional, measure the Longitude,Latitude,Speed,Direction ; 6. Daily report, schedule upload, event upload; 7. 6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status; 8. One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events; 9. 4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center; 10. Internal memory, can save the historical data for review; 11. External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers; 12. Rechargeable Backup Battery inside can last 18hours; 13. Standard DIN Rail 35mm installation or outdoor enclosure.

Model: S262 S263 Name: GSM GPRS 3G 4G Data Logger Keyword: GSM GPRS 3G 4G data logger manufacturer, GSM GPRS 3G 4G Data logger, GSM 3G 4G Data Acquisition Systems, GSM 3G 4G data logging system, Wireless gsm Temperature-Humidity Chambers monitoring, wireless 3G temperature and humidity meter, wireless GSM temperature and humidity recorder, Wireless GSM humidity and temperature sensor. The GPRS 3G 4G Logger is special for remote monitoring temperature, humidity, current, voltage, fuel level, pressure, air condition parameters and so on, it can setup ultra-highâ??high, lowâ??ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly. Module Comparison Instruction Table Model Application Input Types S260/S260C/S260W Indoor 4 Temp Probe,12bits, measure range :55°C to +125°C (67°F to +257°F), 0.5°C accuracy from 10°C to +85°C. S261/S261C/S261W Outdoor S262/S262C/S262W Indoor 4Analog Input,12bits,compatiable with 0~20mA, 4~20mA, 0~5V inputs. S263/S263C/S263W Outdoor Notice *GPS Function is optional.ã??*Outdoor model waterproof class is IP67. *C stands for inbuilt module is CDMA2000. *W stands for inbuilt module is WCDMA. Mainly Features: 1.Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 2.Programmable by SMS Commands or PC Configurator via USB; 3.2 alternate Server via GPRS/3G wireless network, supports IP address and DNS; 4.Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS; 5.GPS module is optional, measure the Longitude,Latitude,Speed,Direction ; 6.Daily report, schedule upload, event upload; 7.6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status; 8.One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events; 9.4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center; 10.Internal memory, can save the historical data for review; 11.External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers; 12.Rechargeable Backup Battery inside can last 18hours; 13.Standard DIN Rail 35mm installation or outdoor enclosure.

Web Enabled By Logger: WEDL-Cloud Based is a advanced new technology Data Logger for un-manned locations data collections and control applications. The data from the remote locations are collected by the Logger and transmitted through GPRS to the Central Server. Also, the remote control functions can be accomplished through the latest internet technology through either web browser or through mobile applications. Applications: Plant Process data Monitoring. Energy consumption Monitoring and Control applications. Gas, Pollution Monitoring applications. Water flow Monitoring and pump house remote control applications.