Characteristics:
1, a three-axis linear guide running smoothly, and high precision.
2, complete machine using seamless welding steel structure, rigid, and no deformation, the dorsal surface lining plate, strength, steel and good.
3, constant power spindle motor, cutting intensity, high efficiency.
4, the U-disk embedded control system completely offline to work more convenient and flexible.
Machine Model QL1212
X.Y working area 1200*1200mm
Z working area 120mm
Table 1300*1420mm
Max. Speed 6m/min
Max. working speed 4m/min
Working delicacy 0.005mm
Repositioning accuracy 0.05mm
Command G code*.u00*.mmg*.plt
Surroundings for software windows98/2000/xp
Power (spindle is not included) 1500w
Working voltage AC220V/50Hz
Spindle power 2.2kw
Spindle rotating speed 0-24000rpm/min
Drive motor Steper
Main Application :
This machine is a new type equipment combining smashing and dust collection as a whole,
it has wide application and is wide used for pharmaceutical industry, chemical industry, pesticide industry foodstuff industry, grain industry and so on..
Working Principle:
Its adapted the vertical low raw material discharging equipment,it makes some raw materials with poor fluidity after broken can be dischanged unblocked and no the phenomenon of accumulated powder.
Its principle of work is as follows:when raw material entered into the crushing chamber,it is broken under the impacting of movable and fixed fluted discs that are rotated in high speed and then becomes the needed raw material through screen.
Its Pulverizer and duster are all made of qualified stainless steel.Its inner wall of the housing is smooth and level being processed through superior technology.Therefore it can make the powder discharging more flowing and is benefit to the work of clean too.The gear disk of high speed and movable teeth are welded through special welding,it makes the teeth is durable,safety and reliable.The machine is in conformity with the requirements of
Through balance test of gear disk with high speed.It is proved that evne if this machine is rotated at high speed.It is stable and no vibration during the period of ordinary operation.Being adapted the interlock apparatus between gear disk with high speed and driving shaft,it is complete reliable in operation.
According to customer nees,may increase water cooling device,and conveyer screw.
Model: GF40B
Capacity: 160-800 kg/h
Spindle Rotating Speed: 3400 rpm
Powder Fineness: 20-120 mesh
Feeding Size:
Lathe Machine
The Pipe Threading Lathe Machine main performance characteristicsï¼?
Big spindle bore and double chuck allows clamp and process big diameter pipes;Integral machine bed adopts high strength iron to relize high rigidity and precision;Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance;Equiped with taper guide bar device this enables the machine to process taper threads.
More information you can views here
Application:
Q13 series pipe threading lathe machine is mainly used for turning the internal and external threads including metric and inch thread,as well as having all the common functions of normal engine lathe such as processing the inner bore and end face of shafts and disks,this machinery is equipped with taper guide bar device which enables this series to process taper thread.This series lathe machine is widely used in industries including petroleum exploiting ,coal and minerals mining,chemical piping and geological prospecting,it is high-efficiency equipment in processing and repairing drilling pipe,drilling rod,thread coupling and so on.
Standard accessories:
Tool post,Tailstock,Chuck,taper guide bar,Lighting lamp,Coolant pump,Rear support bracket,Pad iron etc.
Optional accessories:
Digital readout,Chuck,Faceplate,Chasing dial,Center rest,Signal light,Protective cover(lead-screw,chuck,tool post),and Grinding attachment etc.
Product main technical parameters:
SpecificationsUNITQ1313
CapacitySwing over bedmm630/800
Swing over cross slidemm340/540
Distance between centersmm1500/3000
Pipe threading rangemmÃ?30-126
Width of bed waymm550
Max.load capacityT3
SpindleSpindle boremmÃ?130
Spindle speed steps-FWD. 18/REV. 9
Spindle speed rangerpm12-642/19-800
Chuck sizemm400
Chuck type-3-jaw manual
Features:
The ES-TOP series of duplex milling machines make it simple to machine precision angles and dimensions on blocks and plates for any application.
Easy to use input screen for parameters.
Once the cycle is complete, the clamps retract and the finished part can be removed and replaced with the next.
Learn from Japan's mature technology, continuously summarize and improve through long-term operational practice, develop and improve various functions, make it easier to operate, safer and faster.
Product featureú¦
í÷Adopt CNC technology, servo motor in feeding, with high efficiency, stable work piece precision.
í÷Key hydraulic, pneumatic and electric parts all imported.
í÷Easy programming and can directly use the program data made by lofting software.
í÷Computer with Chinese/English interface, easy operation, and can display the drawing of work piece.
í÷Loading, marking, drilling and unloading are all performed automatically.
í÷Only need to input size of work piece, diameter of holes, stadia and quantity of work piece when edit program, or use CAD/CAM direct conversion.
í÷With avoided shearing functions, so as to process fixed-length angles.
í÷With self-diagnosis failures function.
í÷This processing line is composed of transverse conveyor, overturn conveyor, infeed conveyor, CNC infeed carriage, two sets of drilling units, one set of marking unit, automatic unload conveyor and corresponding hydraulic station, electric cooling system.
í÷There is one set of drilling unit on each side. Every drilling unit can be installed with three drills of different dimensions. The drilling unit can realize the CNC movement holistically for change of drilling stadia, therefore to ensure the accuracy of holes.
í÷Rotation speeds of all spindles are stepless adjustment realized by transducer, and feeding speeds are also stepless adjustment realized by speed regulating valves. Transform of the rapid feeding, work feeding, and rapid withdrawing of spindles all are finished automatically.
í÷One marking unit in the drilling line. Marking stadia can be preset conveniently.
í÷Marking, calmping of the workpiece and infeed of the drilling are driven by the hydraulic system. Main components are imported. Circulate cooling system is applied so as to prolong the life of drills.
í÷The control system consists of the host computer, CNC system, servo motor, PLC, external monitoring switch, etc. Just input the dimension of the workpiece, the processing program will be generated automatically. Besides, the program can be saved, selected, displayed and communicated as per the workpiece No.
Product Basic Parameter:
Model TJX2532
Angle size L140ºt140ºt10~L250ºt250ºt32
Marking force(KN) 1030
Max. length of blank(m) 14
Max. length of finished(m) 14
Range of stadia(mm) 50-220 (stepless adjustment)
Drills per side 3
Marking Groups 1
Characters per marking group 15
Dimension of letter(mm) 14í-10í-19 By customersí» request
CNC axes 3
Spindle rotation speed(r/min) 180ú¡560ú¼Transducer stepless adjustment
Feeding speed of angle(m/min) 40
Diameter of drilling(mm) º¦17.5~º¦40
Stroke of Spindle(mm) 180
Processing precision Accordance with GB2694-81
Programming mode Input by keyboard, RS232 interface, floppy disk and USB interface
Overall dimensions (m) 29í-8.9í-2.5
Gross Weight of machine(kg) 16800
Product featureú¦
í÷The machine-frame is made by C-type plate welding, with good rigidity and big handling space. The machine sets three die-stations (among them, one is the marking die-station), automatic switching die-stations. Clamping system can adapt to different work piece, with zero baffles as datum mark, and work piece supported by rolling-ball working table. Axis X & Y action should be controlled by servo motor and ball-screw driving, and double-axis CNC system controls the position of punching, so as to make the whole machining process automatically; operator may input the sizes of work piece to computer for repeated calling program in the future.
í÷ Adopt CNC technology, servo motor in feeding, with high efficiency, stable work piece precision.
í÷Important functional components adopt modular assembly, easy to replace it.
í÷ Carry out punching, marking and drilling on the one plate.
í÷Drilling unit has the functions including rapid falling, slow work-feeding and quick feeding back to improve working efficiency.
í÷Easy programming, may input the diameter of holes, position and the quantity of work piece to computer, and also may use the program generated by lofting software, or adopt direct conversion CAD/CAM.
í÷ With function of self-diagnosis for failures.
í÷ Lighten the working strength of workers.
Product Basic Parameter:
Model TBJ100 TBJ100A TBJZ100 TBJZ100A
Max size of work piece Lí-W(mm) 1500í-800 1500í-1000 1500í-800 1500í-1000
Max. diameter of punching(mm) ª¦26 ª¦26 ª¦26 ª¦26
Plate thickness of punching(mm) 5í½25 5í½25 5í½25 5í½25
Max. diameter of drilling(mm) ----- ----- ª¦50 ª¦50
Plate thickness of drilling(mm) ----- ----- 40 40
Punching force(KN) 1000 1000 1000 1000
Marking force(KN) 800 800 800 800
Min. distance between hole and plate edge(mm) 25 25 25 25
----- ----- Drilling depends on hole diameter
Dimensions of marking letter(mm) 14í-10í-19 By customersí» request
Quantity of letter 10í½18
Die-stations 3 3 4 4
Feeding speed of drilling(mm/min) ----- ----- 25í½280 25í½280
Stroke of drilling spindle(mm) ----- ----- 180 180
Rotation speed of drilling spindle(r/min) ----- ----- 100í½600 100í½600
Precision Accordance with GB2694
Programming mode Input by keyboard, RS232 interface, floppy disk and USB interface
Overall dimensions
Lí-Wí-H(mm) 3200í-3000í-1900 3500í-3000í-1900 3200í-3000í-2600 3500í-3000í-2600
Gross Weight of machine(kg) 8000 10000 8800 10800
characteristics
1. 45 º inclined bed, double linear guide rail, high accuracy, good dimensional stability;
2.The overall structure of integrated design and manufacturing foot of the bed, bed foot of the bed is made of resin sand casting, aging, ultraaudio frequency hardened rails for precision grinding, precision to maintain good;
3.The overall foot of the bed with high stability and rigidity, machine rigidity; fully enclosed protective structure, the machine in water, oil, dust and safety performance is much better than similar products;
4.Tndependent spindle structure while matching precision class P4 spindle bearings, spindle speed, thermal deformation;
5. X-axis maximum stroke(280 mm), use knife row, high work efficiency.
use
This machine is suitable for high accuracy and conformance requirements for small and medium size disk parts
