Fog jet nozzles produce a high volume of the fine mist through multiple small apertures. They produce full cone type pattern with large flow rates with aid of several flat jets spraying into one another.
Applications:
1. Dust Control
2. Chemical processing
3. Fire Protection
Customization of material and connections upon request.
Fog Nozzle with Ceramic Orifice and Anti-drip. Thread Size: 3/16¿¬s, 10/24 and 12/24UNC, and 3/8",1/4. Body Material: Brass or Brass Plated Nickel or Stainless Steel. Orifice diameter: 0.10mm, 0.15mm, 0.20mm, 0.25mm, 0.3mm, 0.4mm, 0.5mm. The advantage of our Misting Nozzle with ceramic orifice is wear resistance and very longer using life better than stainless steel orifice.
A fog cannon uses highly pressurized water which is pumped through a series of jet nozzles, turning the water into mist through atomization. Applications: 1. Best used for fog cannon: Dust suppression/Humidifying/Cooling 2. Suitable for agricultural sprinkler irrigation of seedlings, flowers, vegetables, greenhouses, courtyards, balconies, gardens, campus greening etc. 3. Landscape fountain atomization, roof cooling Customization of material and connections upon request.
100% quality inspection !! Nozzle orifices : 0.08mm ~ 1.20mm Threads : 10/24, 12/24, 1/8npt Materials : stainless steel, nickel plated brass, brass Flow rate : various choices. Customization available.( + / - 5% tolerance) Droplet size : 6 microns ~ 70 microns (depend on working pressure) Spray angle : 50 degree above
Ultrasonic atomizer nozzles are a flow through design. Ultrasonic nozzles operate by converting high frequency sound waves into mechanical energy that is transferred into a liquid, creating standing waves. Liquid is pumped at the rear of the probe and travels down through the center until it reaches the vibrating tip. Once it reaches the tip portion of the nozzle, ultrasonic vibrations pulverize the liquid into ultra-fine particles for precise coating applications without the use of air pressure. Applications: 1. Dust Suppression 2. Humidification 3. Cooling 4. Odor control 5. Paper cutting 6. Cleaning 7. Thermal power plant 8. Chemical Plant 9. Crushing and screening buildings Customization of material and connections upon request.
Compact stream jet with a defined jet length owing to optimum flow geometry. Compact stream jet with a defined jet length owing to optimum flow geometry. Flow conditions are not affected by turbulence. A concentrated jet with high impact force is achieved. This is used for powerful punctiform impact, wherever concentrated jet power is vital. Characteristic : A high efficiency and economical performance is obtained. Design : One Piece Construction. Application : For High pressure cleaning systems, Jet Cutting and separating. Features : Optimized flow maximum jet power concentrated energy
Flat jet nozzle produces a flat liquid layer. It ensures uniform, parabolic distribution of liquid. The energy of the jet is concentrated over a small surface area. They are non-clogging and one-piece construction can operate through pressure fluctuations. Flat spray nozzles are designed for high pressure washing applications. These nozzles are specially designed and machined with precision which allows even spray coverage and distribution. This results in effective and uniform. Applications: 1. Material Cleaning and processing 2. Surface treatment 3. Roll cooling 4. High impact Washing 5. Degreasing and rinsing 6. Spray Coating and Lubricating 7. Washing and Phosphating Process 8. Quenching Customization of material and connections upon request.
These nozzles are used for adjusting of variable spray directions. Applications: 1. Cleaning 2. Cooling 3. Washing 4. Dust Suppression 5. Lubrication Customization of material and connections upon request.
F wind Jet NOzzle features a high impact, flat fan distribution of compressed air.it is available in durable ABS plastic or aluminum alloy. It produces a quiet, efficient, conrolled flat fan distribution of compressed air. The air stream is discharged through 16 precision orifices that ensure uniform distribution and spray pattern integrity. it fits through1/4 inch inlet connection wity BSPT male screw thread. Two convenient mounting holes on the ABS model ensure correct positioning on the header or manifold or fixed applicatons, offering uniform distribution of air curtain.Plastic F Wind Jet Nozzle with stands temperatures up to 77 at 7 bar. While aluminum alloy Fwind Jet NOzzle with stands temperature of 250 and pressure about 30 bar.
Desc.: 3-Adjustable Spraying Patterns Metal-Jet Pistol Garden Hose Nozzle Item No.: HT1335 Quick change patterns; Heavy duty construction. Size: 5-1/2" Packing: tie on card Pcs/ctn: 36 Ctn size: 51*26*52cm NW/GW: 15/16kg Pcs 20'/40'FCL: 13500/27100.
