Fisherbrand microcentrifuge tube craps screw caps without O-rings blue
Fisherbrand
Graduated at 1.0mL intervals
Large, frosted writing area
Available as pre-sterilized and nonsterile tubes
Blue cap fits both 5 and 10mL tubes
Secure fit between tube and cap to give leakproof seal
Fisherbrand microcentrifuge tubes 1.5ml Graduated tube with a flat cap Fisherbrand High-clarity polypropylene Graduated in 0.1 and 0.25mL markings Withstand forces up to 30,000xG Easy-open caps with needle insertion spot and textured marking area Labeling area on tube exterior Highly polished interior for maximum sample recovery Temperature range of -80 to +121 C Fit all standard rotors Nonpyrogenic Autoclavable at 121 C/15psi for 15 minutes
Fisherbrand microcentrifuge tube craps screw caps without O-rings blue Fisherbrand Graduated at 1.0mL intervals Large, frosted writing area Available as pre-sterilized and nonsterile tubes Blue cap fits both 5 and 10mL tubes Secure fit between tube and cap to give leakproof seal
Fisherbrand microcentrifuge tubes 1.5ml Graduated tube with flat cap natural Fisherbrand Manufactured from durable chemical-resistant polypropylene 0.6mL tube is graduated in 0.2mL increments; 1.5mL tube, in 0.5mL increments with an additional graduation at 0.1 and 2.0mL size, in 0.5mL increments Designed for use in critical applications where minute sample recovery is important Withstand speeds up to 30,000xG Recommended for freezer-to-centrifuge use Autoclavable up to 120 C and withstand freezing temperatures as low as 80 C RNase/DNase free
Fisherbrand microcentrifuge tube 2.0mL capless Graduated tube natural Fisherbrand Use these micro centrifuge tubes for a variety of applications. Fisherbrand Polypropylene Microcentrifuge Tubes without Cap are ideal for handling needs where a snap cap can interfere.
Fisherbrand Microcentrifuge Tubes 0.5mL Free standing Screw Cap Tubes with cap and % O Ring Sterilized Natural Fisher Sientific Screw Cap Microcentrifuge Tubes 0.5mL; Free Standing; with Screw Cap & O-Ring; Natural Optimized for secure short term sample storage in low temperatures. Offered in 0.5mL through 2.0mL volume capacity, these tubes are autoclavable, boil proof, and freezable to -80C. Find a selection of colored screw caps to improve sample identification in the lab. Amber tube options are ideal for protecting your light-sensitive samples. Screw Cap Microcentrifuge Tube Design Tubes are designed with conical bottoms allowing for more complete sample retrieval| Screw caps with O-rings guard against leakage by forming a positive seal against the rim of the tube| Tethered screw caps remain attached to the sample tube but can rotate completely for conveniencedash (em) the tethered screw cap is the solution when it is important to maintain the same cap with the same tube.
Fisher Scientific Fisherbrand Microcentrifuge Tubes 2.0mL Polypropylene Tubes Individually wrapped/ Sterilized Natural Description: Capacity 2.0mL high-clarity polypropylene Graduated in 0.25mL increments Withstand forces up to 30,000 x g Easy-open caps with needle insertion spot and textured marking area Labeling area on tube exterior Highly polished interior for maximum sample recovery Temperature range of -80 to +121 C Fit all standard rotors Nonpyrogenic Autoclavable at 121 C/15psi for 15 minutes
Fisherbrand Microcentrifuge Tubes 1.5mL - 1.7mL Polypropylene Graduated Tube with locking lid Natural Fisher Scientific Description: Convenient, pierceable locking lids snap into place with one-handed operation Polypropylene tubes with flat tops Ideal for sample-handling applications, including centrifugation, boiling and freezing of specimens, incubation and storage With graduation marks for volume estimation RNase and DNase free Centrifuges that develop excessive heat may damage this tube.
FisherBrand Microcentrifuge Tubes 1.5ml Graduated Tube With Flat Cap Description Capacity: 1.5mL high-clarity polypropylene Graduated in 0.1 and 0.25mL markings Withstand forces up to 30,000Ã??G Easy-open caps with needle insertion spot and textured marking area Labeling area on tube exterior Highly polished interior for maximum sample recovery Temperature range of -80 to +121 C Fit all standard rotors Nonpyrogenic Autoclavable at 121 C/15psi for 15 minutes
FisherBrand Microcentrifuge Tubes 2.0mL Graduated Free Standing Screw Cap Tube with Cap & O-Ring Description Reduce sample contamination by keeping cap with tube Natural-colored polypropylene tubes include leash-and-loop tether. Ultragrade polypropylene caps are fitted with ethylene/propylene O-rings. Available sterile or nonsterile with round or skirted bottoms. Removable tether rotates freely for easy opening and closing O-ring forms positive seal with tube to reduce leakage Withstand 20,000xG Suitable for vapor-phase liquid nitrogen storage, boiling and autoclaving RNase and DNase free Order Info Nonsterile tubes come separate from tether caps; sterile tubes come attached; 500 per pack Max. RCF 20000xG Closure Material - Polypropylene Autoclavable - Yes Color - Natural Max. Force - 20000xG Packaging - Bag Sterility - Sterile Closure Type - Tether Cap Capacity (Metric) - 2mL Material - Polypropylene For Use With (Application) Suitable for vapor-phase liquid nitrogen storage, boiling and autoclaving Shape - Skirted
