Fire Evacuation Plan

Supplier: Fire Fighting System, Fire Evacuation Plan, Fire Suppression System, Fire Alarm System, Design Calculations

Supplier: Fire exit sign, exit signages, exit signboard, night glow, auto glow, photo, photo luminescent signages and signboards with digital print and matt/gloss lamination, hospital signage, hospital sign, hospital signboard, hotel signage, hotel sign, hotel signboard, school signages, school signboard, school sign, fire exit signage, fire exit signboard, fire emergency plan, fire exit plan, fire evacuation plan, assembly area signage, floor signage, floor signboards
Services:
Buyer:

These cables are used for the fire alarm systems, power supply control of the equipment that must function during fire, emergency lighting, the equipment for evacuation and follow up and warning systems in intelligent or semi – intelligent buildings where intense human population or valuable goods are found such as: hospitals, cinemas, theatres, schools, shopping centers, airports, factories, etc. Firekab products have a low smoke density, are halogen free and they don’t emit poisonous gases. We can produce firekab cables with bs 6387 c w z, en 50200, iec 60331, etc. We have 2 lpcb certified firekab products.

Easy to use it can produce highly visible spray ejected from the extinguisher and can reduce the smoke and toxicity in the fire during the process of putting out fire, which is convenient for people to evacuate and firefighters to put out fire. Everyone can use it.

A fire alarm system is a set of electric/electronic devices/equipment working together to detect and alert people through visual and audio appliances when smoke/fire is present. These alarms may be activated from smoke detectors, heat detectors, water flow sensors, which are automatic or from a manual fire alarm pull station. Types of Fire Alarm System: All Fire Alarm Systems essentially operate on the same principle. If a detector detects smoke or heat or someone operates a break glass unit (manual break point), then alarm sounders operate to warn others in the building that there may be a fire and to evacuate. It may also incorporate remote signaling equipment which would alert the fire brigade via a central station. Conventional Fire Alarm System In a Conventional Fire Alarm System, a number of call points and detectors are wired to the Fire Alarm Control Panel in Zones. A Zone is a circuit and typically one would wire a circuit per floor or fire compartment. The Fire Alarm Control Panel has a number of Zone Lamps. The reason for having Zones is to give a rough idea as to where a fire has occurred. This is important for the fire brigade and of course for the building management. The accuracy of knowing where a fire has started is controlled by the number of Zones a Control Panel has and the number of circuits that have been wired within the building. The Control Panel is wired to a minimum of two sounder circuits which could contain bells, electronic sounders or other audible devices. Each circuit has an end of line device which is used for monitoring purposes. Addressable Fire Alarm System The detection principle of an Addressable System (Fire Alarm System) is similar to a Conventional System except that the Control Panel can determine exactly which detector or call point has initiated the alarm. The detection circuit is wired as a loop and multi devices may be connected to each loop. The detectors are essentially Conventional Detectors, with an address built in. The address in each detector is set by dil switches and the Control Panel is programmed to display the information required when that particular detector is operated. Additional Field Devices are available which may be wired to the loop for detection only i.e. it is possible to detect a normally open contact closing such as sprinkler flow switch, or a normally closed contact opening. Fire Alarm System comes with single loop as well as multi loops. It depends on requirement. The items which are integrated with Fire Alarm Systems are given belowâ?¦. Brands are available : AGNI, MORLEY, NOTIFIER, Modern Technologies gives you top class branded Fire Alarm System with affordable price. We also provide installation & maintenance services.

Features  External (key-switch operated): Reset/resound/test zone lamps evacuate Silence alarm sounders Silence fault sounders Internal: One man detector test Zone isolate Revert to short-circuit: fire (no resistors in call points) External indicators: Sounder fault Battery/power supply fault Mains on Zone fire Zone fault Internal indicators: Open circuit zone fault Short circuit zone fault Zone isolated Engineer test selected Outputs: Two sounder circuits (alarm relay contacts can be obtained by connecting a relay to a sounder circuit) Ancillary connections for expansion modules will allow the following: Repeater panels Multiple sounder outputs Connection to landlord panel

Supplier: Fire pumps, fire cables, fire extinguishers, sprinklers, fm 200, voice evacuation, fire alarm system

Supplier: Optical Smoke Detector, Addressable Fire Alarm System, Conventional Fire Alarm System, Addressable Fire Telephone System , Voice Evacuation Control Panel And Speakers , 12 Gas Fire Suppression System, Emergency Light System, Fire Pump System, Fire Hose And Fire Hose Reel Cabinet, Fire Proof Cable And Fire Pipe

Webpass IP Reader is a standalone, IP65 rated weather proof RFID access controller, which can be connected with more than one Webpass readers over single intranet (LAN). Every package of shipped item will be come with SoMAC, a proprietary management software to manage multiple units of Webpass IP Readers in a system. Webpass IP Reader featured both EM or Mifare or mixed (EM and Mifare) system, and it is avaliable for other custom made type project like EzLink, Desfire, HID..etc system Main Features IP 65 Rated Weather Proof Multiple card types support (EM/ Mifare standard) Cost-Effective door controller solution Flexible TCP/IP wiring plan solution provided. Technical Specification Verification option Card Pin Card + Pin Identification option 4, card & Pin/ card/ Pin/ card & personal password User types 4 ( normal user/ administrator/ visitor/ guard touring) Capacity 20,000 cards ( Could be extend to 50,000 cards) Access logs 65,535 System logs 1,500 WG output 1 WG input 1 Fire Alarm Input Dry Connector Yes Built-in 1 set (24V-1A) Built-in Door Sensor 1 sets Built-in Exit Button 1 sets Buzzer 1 sets Reset Button Yes Tramper Switch Yes Support Wiegand Format WG 26/34 Communication Iinterface RS-485 × 1 TCP/IP→PC Communication Distance RS-485 → 1.2 KM TCP/IP → 100M WG → 80M Keypad 10 numeric keys + 2 function keys LED Indicator Ring type LED Holidays 50 sets Time Sets 255 sets Time Zone 120 sets Group 255 sets Power 9~24V (Maximum work rate 3.5W) Languages Traditional Chinese/ Simplified Chinese/ English Operation Temperature 0˚C ~ 65˚C Operation Humidity 5% ~ 95%RH RFID Frequency 125 KHz (EM/TM)；13.56 MHz (Mifare) RFID Read Range 7 ~ 12cm (EM/TM)，3 ~ 5cm (Mifare) Dimension 120 × 80 × 25 mm Weight 150 g.