Fixed protection, such as wooden brackets, shall be applied in the delivery and transportation of y303-30 hydraulic support columns. In case of large quantities, such as hydraulic jacks, which are delivered in batches, shall be bundled firmly to avoid falling off, extrusion, rolling collision and other damages. If it is in winter, the product should be injected with antifreeze according to the low temperature of the applicable area and the transportation distance. In other seasons, the emulsion in the column of Y303-30 hydraulic support should be emptied. However, the transportation and storage process of the column after the drainage should be guaranteed, and no corrosion phenomenon should occur inside.
If the hydraulic support column of Y303-30 has been stored for more than three months, the emulsion in the hydraulic support column should be checked for deterioration. If so, the emulsion should be replaced. When the drainage method is adopted, the rust should be checked. The hydraulic support column of Y303-30 should be paid attention to and ensure that the joint seat is not damaged during the use, and the transportation package should be strong and reliable. The column should be loaded and unloaded lightly in the process of transportation. Special attention should be paid to the joint seat so as not to damage the interface and affect the connection use of the hydraulic support column.
In fact, the above methods are not only for y303-30 hydraulic support column, but also for all kinds of hydraulic support jack cylinders. In transportation, storage and use, some problems can be avoided for the hydraulic support column or hydraulic support jack. Henan Shuangzhi Machinery as hydraulic support accessories manufacturers, can produce and process hydraulic support column, hydraulic support jack, bed beam, bed, bottom adjustment beam and other accessories, welcome new and old customers to consult understanding, looking forward to working with you!
The hydraulic prop is the main component to support and carry the hydraulic support, it directly affects the performance of the hydraulic support. Therefore, in addition to reasonable working resistance and reliable working characteristics, hydraulic prop must also have enough compressive and bending strength, good sealing performance, simple structure and suitable for the work of hydraulic support needs. Hydraulic prop is generally composed of piston, piston rod, cylinder block three parts. Because the support work, the column bearing capacity is large, and the drop column force is small, so the piston rod diameter is larger, often use hollow structure, in order to ensure sufficient stiffness of the piston is generally y sealing ring, copper ring guide, cylinder bottom welding. The cylinder block and the cylinder head are connected by steel wire, thread or clasp. In order to prevent the external coal seam and other stolen goods into the cylinder block, the guide sleeve should be equipped with a dustproof ring. For the single telescopic column, in order to expand the support height of the hydraulic support, can use mechanical extension rod, the head structure of the column is spherical, and the connection between the top beam or the base with pin shaft or block fixed, in order to make the column in the work by a certain adaptability. The liquid supply method of hydraulic prop consists of two ways: internal liquid supply and external liquid supply. In addition to the double telescopic column with internal liquid supply mode, the single telescopic column is mostly external liquid supply mode, which is simple in structure, convenient in processing and maintenance. If you need hydraulic support column, you are welcome to contact us in time
Daikin Hydraulic Pump PV22 Brand new Made in Japan Quantity 110pcs
Hydraulic Bottle Jack
We are supplier and exporter of Hydraulic Oil. Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs. Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
china coal0001 DN28 Steel Single Hydraulic Acrow Prop Jack Introduction of DN28 Steel Single Hydraulic Acrow Prop Jack Mine DN28 Steel Single Hydraulic Acrow Prop Jack is supporting parts of various frame type hydraulic powered supports in fully mechanized coalface, light duty roof caving coal hydraulic support, for the support of support to help push slip, balance, lateral push function, is the main component of the frame and various parts of the action. Variety Specification of DN28 Steel Single Hydraulic Acrow Prop Jack According to zoning, DN28 Steel Single Hydraulic Acrow Prop Jack can be divided for pushing jack, front beam jack, retractable beam jack, the quilibrium jack, side pushing jack, Jack, anti down Jack, anti-skid jack, slope protecting Jack. How to Use DN28 Steel Single Hydraulic Acrow Prop Jack? 1. Lifting DN28 Steel Single Hydraulic Acrow Prop Jack up by the hydraulic support on the integrated control valve; 2. Should be used to meet the requirements of the MT76 emulsion. The emulsion should be kept clean, and replaced in time to prevent damage to the friction surface of the jack and affect the sealing effect; Technical Parameter of DN28 Steel Single Hydraulic Acrow Prop Jack ModelMax height (mm)Min height (mm)Distance (mm)working resistance (kn) Working pressure (Mpa)cylinder diameter (mm)base area (mm*2)Weight (kg) DN315-160/9031502450700160259012078 DN28-200/9028002100700200319012074 DN25-250/9025001800700245399012068 DN22-300/902240154070029446.39012060 DN20-300/902000136064029446.39012055 DN18-250/8018001250550245498012045 DN16-250/8016001100500245498012041 DN14-250/8014001000400245498012038 DN12-250/801200870330245498012034 DN10-25/801000720280245498012029 DN08-250/80800590210245498012026 DN06-25/80650510140245498012023
china coal0001 DWB FRP Fiber Reinforced Plastics Single Hydraulic Prop Introduction of DWB FRP Fiber Reinforced Plastics Single Hydraulic Prop DWB FRP Fiber Reinforced Plastics Single Hydraulic Prop for foreign Note constant resistive temporary pillars, it is mainly used in coal mines to dig ends temporary support, can also be used for other mining and geotechnical engineering applications require temporary shoring, the use of lightweight composite products material produced. Available coal hydrostatic water to make it work, with a light weight corrosion-resistant and easy to operate and so on. Application of DWB FRP Fiber Reinforced Plastics Single Hydraulic Prop DWB FRP Fiber Reinforced Plastics Single Hydraulic Prop as a temporary support equipment, is widely used in coal industry, roadway excavation, roadway maintenance, new advanced support and temporary support prop equipment. Parameter of DWB FRP Fiber Reinforced Plastics Single Hydraulic Prop ParameterDWB22-30/100DWB25-30/100DWB28-30/100 Max.Height(mm)224025002800 Working Stroke(mm)570/820570/820570/820 Rated Resistance(kN)303030 Rated Working Pressure(MPa)3.83.83.8 Setting Pressure(kN)303030 Cylinder Inside Dia.(mm)100100100 Working Pressure of Safety Valve(MPa)3.83.83.8 Weight(kg)212222.5 ParameterDWB31.5-30/100DWB35-30/100DWB38-30/100 Max.Height(mm)315035003800 Working Stroke(mm)570/820570/820820 Rated Resistance(kN)303030 Rated Working Pressure(MPa)3.83.83.8 Setting Pressure(kN)303030 Cylinder Inside Dia.(mm)100100100 Working Pressure of Safety Valve(MPa)3.83.83.8 Weight(kg)252736 Working MediumEmulsified Liquid, Hydrostatic Water.
Hydraulic prop is generally composed of piston, piston rod, cylinder block three parts. Because the support work, the column bearing capacity is large, and the drop column force is small, so the piston rod diameter is larger, often use hollow structure, in order to ensure sufficient stiffness of the piston is generally y sealing ring, copper ring guide, cylinder bottom welding. The cylinder block and the cylinder head are connected by steel wire, thread or clasp. In order to prevent the external coal seam and other stolen goods into the cylinder block, the guide sleeve should be equipped with a dustproof ring. For the single telescopic column, in order to expand the support height of the hydraulic support, can use mechanical extension rod, the head structure of the column is spherical, and the connection between the top beam or the base with pin shaft or block fixed, in order to make the column in the work by a certain adaptability. The liquid supply method of hydraulic prop consists of two ways: internal liquid supply and external liquid supply. In addition to the double telescopic column with internal liquid supply mode, the single telescopic prop is mostly external liquid supply mode, which is simple in structure, convenient in processing and maintenance.
The hydraulic support connector is also quite common in the daily procurement of hydraulic support parts. Its main function is to connect scraper conveyor and hydraulic support organically to realize the role of force transmission between them. When working, the connecting head has to move the bracket and push the conveyor to carry out the operation, completing the organic operation of these two links. When the hydraulic support connector works under the alternating stress of tension, compression and torsion, if the working environment in the mine is poor and the air is humid, there may be many unexpected factors, leading to the deterioration of the stress of the connector. Once the connection is damaged, the scraper conveyor and hydraulic support may not work normally, which may be shut down and stop production, causing huge losses. Therefore, it is necessary to check the first vulnerable parts of the hydraulic support connection from time to time, so as to avoid production problems. If you need to purchase hydraulic support connectors, you are welcome to contact us
The main function of the connecting head of the hydraulic support is to connect the scraper conveyor and the hydraulic support organically to realize the effect of force transmission between them. When working, the connecting head has to move the bracket and push the conveyor to carry out the operation, and the organic operation of these two links should be completed. Therefore, in addition to the alternating stress of tension, compression and torsion, and the poor working environment in the mine, and the heavy humidity in the air, there may be many unexpected factors, leading to the deterioration of the stress of the joint head. Once the connection is damaged, the scraper conveyor and hydraulic support may not work normally, and may be shut down and stop production, causing huge losses. Therefore, the hydraulic support connection head also plays an important role in coal mine production. For more information about hydraulic support connectors, you can consult henan Shuangzhi Machinery for more information
