Desheng Material Technology Co., Ltd. has sufficient carbomer stocks, price reductions and sales promotion, factory direct sales, spot direct supply, avoiding the price difference between middlemen, and buying carbomer preferentially.
The article is just a brief introduction of Carbomer. For inquiries about Carbomer or if you want to know more details and specific price information, please call or enter the Desun website for detailed consultation.
This event is aimed at products, Carbomer 940 and Carbomer 980. Carbomer is routinely used in hand-washing gels, daily chemicals, and medicine. In use, we pay more attention to issues such as viscosity and transparency. The carbomer produced by Desheng Materials has the characteristics of pure white powder, high transparency, and viscosity can be adjusted according to the direction of use.
Desheng was established in 2005, specializing in the production of polyacrylic acid materials. So far, it has developed three generations of serum separation gels for different purposes and carbomer products for non-use. A professional R&D team is one of the important conditions for Desheng to be confident to gain a foothold in the market, and market feedback is the best goldsmith.
The big difference between Desun Carbomer and ordinary carbomer on the market is that in the powder state, it can be seen that the powder of Desun Carbomer is obviously whiter, and the powder is more fluffy and delicate. When configured as a solvent, the transparency is much higher than similar products. As Desheng is a direct manufacturer, individual indicators can also be customized.
It is a very good choice whether it is used by direct customers or purchased by traders. It can be purchased in small quantities or signed annual contracts to enjoy ultra-low discounts. While the product quality is guaranteed, the price is unlimited, and after-sales service to enjoy product quality problems, you can apply for direct return, exchange, or refund, real manufacturers, reliable products, choice is very important!
[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected  3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15  - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01
Natamycin powder, E235, CAS no.7681-93-8, manufactured by fermentation process, used as safe food preservative. Natamycin is a safe food preservatives used in wide variety of products such in cheese, fermented meat, yogurt, beverages, wines and baked goods against yeasts and molds. Due to the benefits of Natamycin as a natural and efficient food preservation method, its application has a huge potential to extend shelf life and prevent spoilage. As an experienced Natamycin manufacturer and supplier, we has been supplying and exporting Natamycin for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Natamycin Specification ITEM STANDARD Appearance Off-white crystalline powder, odorless Purity 90%-102% Loss on drying 6%-9% pH (10% solution) 5.0- 7.5 Arsenic 1 mg/kg Lead 1 mg/kg Mercury 1 mg/kg Total heavy metals ( as pb) 10 mg/kg Total plate count 100 cfu/g Coliform bacteria 30 MPN/ 100g E.coli/ 5g Negative Listeria monocyto/ 10g Negative Salmonella/ 10g Negative
Caramel Color, E150, CAS no.8028-89-5, is a water soluble food coloring manufactured through heat treatment of a variety of sugars, available as Dark brown black powder or liquid. Caramel color is one of the oldest and most widely used food coloring's. Caramel Color is widely used as coloring agent and flavor enhancer. As an experienced Caramel Color manufacturer and supplier, we has been supplying and exporting Caramel Color for almost 10 years, we supply Caramel Color E150a, E150b, E150c and E150d. Please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Caramel Color Specification ITEM STANDARD RESULTS E 0.1%1CM (610nm) Absorbance 0.259-0.285 0.262 Specific Gravity(25�°C) 1.255-1.270 1.260 Viscosity(25�°C) Cps 8000 80 PH Value 2.7-3.3 3.0 Haze Pointâ?¥ mins 40 >40 Gelation Time â?¥mins 100 >100 Resinification â?¥ hrs 20 >20 Isoelectric Point 1.0
Xanthan gum 80mesh and 200mesh, cream white powder, E415, CAS no.11138-66-2, food thickener, biosynthetic rubber, mainly made of starch, manufacturing process through fermentation process using the microorganism Xanthomonas Campestrisis. Advantages than other gums: outstanding water solubility and high viscosity; excellent stability in temperature and PH value; Function and uses: Xanthan gum is a high performance thickener as the viscosity of 1% is about 100 times stronger than 1% gelatin solution. As an experienced Xanthan gum manufacturer and supplier, we has been supplying and exporting food grade Xanthan gum 80mesh and 200mesh for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Food grade Xanthan Gum 80mesh, 200mesh Specification ITEMS STANDARD Appearance white or cream-color and free-flowing powder Viscosity: 1% Xanthan Gum in 1% KCl Brookfield, LVTD,spindle 3.60rpm, 25 1200 1600 mpa.s Assay(on dry basis) 91.0 108.0% Loss on drying(105oC, 2hr) 6.0 12.0% V1 : V2: 1.02 1.45 Pyruvic Acid 1.5% min PH of 1% solution in water 6.08.0 Heavy metals(as Pb) 20 mg/kg max Lead(Pb) 5 mg/kg max Arsenic(As) 2 mg/kg max Nitrogen 1.5% max Ash 13% max Particle size 80 mesh: 100% min, 200 mesh: 92% min Total plate count 2000/g max Yeasts and moulds 100/g max Pathogens germs absence S. aureus Negative Pseudomonas aeruginosa Negative Salmonella sp. Negative C. perfringens Negative
Microcrystalline Cellulose, MCC, E460, CAS no.9004-34-6 is partially depolymerized cellulose prepared by treating alpha-cellulose, obtained as a pulp from fibrous plant material, with mineral acids, and it appears as a fine white to off-white powder. It is used as a texturizer, an anti-caking agent, emulsifier in pasteurized cream, fermented milk, cheese, processed fruit, dried vegetables, etc. As an experienced Microcrystalline Cellulose manufacturer and supplier, we has been supplying and exporting Microcrystalline Cellulose for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Microcrystalline Cellulose Specification ITEM STANDARD Appearance A fine white or almost white odorless powder Particle size 98% pass 120 mesh Assay (as �±- cellulose, dry basis) 97% Water-soluble matter 0.24% Sulphated ash 0.5% pH (10% solution) 5.0- 7.5 Loss on drying 7% Starch Negative Carboxyl groups 1% Lead 5 mg/ kg Arsenic 3 mg/ kg Mercury 1 mg/ kg Cadmium 1 mg/ kg Heavy metals (as Pb) 10 mg/ kg Total plate count 1000 cfu/g Yeast and mould 100 cfu/g E. coli/ 5g Negative Salmonella/ 10g Negative
Product Description Categories Preservatives Qty in 20 FCL 5600kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E235 CAS No. 7681-93-8 HS Code 294190 Specification FCC/USP Natamycin, E235, CAS no.7681-93-8, food preservative. Natamycin 50% in Glucose is a mixture of Glucose and Natamycin. It is used in the storage and preservation of fruits (e.g. orange, pear, apple or strawberry), fruit juice and green tea drinks. Natamycin suspension can be added directly(spraying or immersion)to the food. The recommended dosages of Natamycin 50% in Lactose is in the range 4â??40 mg per kg or litre of food. Exact dosage cannot be stated as it depends on the nature of the product for which it is intended. As an experienced Natamycin 50% in Glucose manufacturer and supplier, we has been supplying and exporting Natamycin 50% in Glucose, Natamycin 95%, Natamycin 50% Lactose, and Natamycin 50% Nacl from China manufacturers for almost 10 years, please be assured to buy from us. Any inquiries please feel free to contact us, we will reply you within 1 working day. Natamycin 50% in Glucose Specification ITEM STANDARD Appearance Off-white crystalline powder, odorless Purity 50% Loss on drying 8% pH (10% solution) 5.0- 7.5 Arsenic 1 mg/kg Lead 1 mg/kg Mercury 1 mg/kg Total heavy metals ( as Pb) 10 mg/kg Total plate count 100 cfu/g Coliform bacteria 30 MPN/ 100g E.coli/ 5g Negative Listeria monocyto/ 10g Negative Salmonella/ 10g Negative
Isolated Soy Protein, CAS no.9010-10-0, is manufactured from high quality Non-GMO soybean, available as yellow or milk white powder. It has excellent dispersibility, a high viscosity. Isolated Soy Protein is used in high protein beverages, infant formulas, cereals, nutritional bars, meat products, low-temperature barbeque products, reformed cheese, sausages, fish food, and frozen food. As an experienced Isolated Soy Protein manufacturer and supplier, we has been supplying and exporting Isolated Soy Protein for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Isolated Soy Protein Specification SOY PROTEIN ISOALTE (Emulsion Type) is our new special designed soy protein isolate with higher viscosity and stronger emulsification, it can help meat processors to achieve higher emulsification requested and higher water binding to reduce the cooking loss and prevent fat loss and improve the structure of final products in a cost effective way. Physical Characteristics Protein(in dry basis N 6.25 mfb) 90% min Moisture 7% max Ash 6% max Crude fiber 0.5% max Fat 0.5%max PH 7.3 ± 0.5 Colour light Flavour neutral Typical Bacteriological Analysis Standard plate count 20,000/g max Coliforms 100/g max E Coli (in 0.1g) negative Yeast and mould 100/g max Salmonella (in 25g) negative Particle Distribution (Typical Analysis)99% through 100# U.S. standard screenHeavy Metal Analysis lead 1.0 mg/kg max Arsenic 0.5 mg/kg max Packing: 20kg net weight, paper/plastic bag poly-lined.Storage: below 75â?? and 60% relative humidity promotes longer shelf life.Certificate: BRC, HACCP, ISO9000, ISO22000, IP, Kosher & Halal certificatedShelf life: one year.
Natamycin 50% in Lactose is a mixture of Lactose and Natamycin. Natamycin, also called Pimaricin, E235, CAS no.7681-93-8, food preservative. It can be used on several kinds of food to inhibit the growth of mould, yeast and fungi and would not impact on food taste. It is safe for human being. Uses: use in dairy foods (cheese) bread, baked foods to preserve and keep them fresh. As an experienced Natamycin 50% in NaCl manufacturer and supplier, we has been supplying and exporting Natamycin 50% in NaCl for almost 10 years, we can also supply other forms of Natamycin. Please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Categories Preservatives Qty in 20â??FCL 5600kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E235 CAS No. 7681-93-8 HS Code 294190 Specification FCC/USP Natamycin 50% in Lactose Specification ITEM STANDARD Appearance Off-white crystalline powder, odorless Purity >= 50% Loss on drying =< 8% pH (10% solution) 5.0- 7.5 Arsenic =< 1 mg/kg Lead =< 1 mg/kg Mercury =< 1 mg/kg Total heavy metals ( as Pb) =< 10 mg/kg Total plate count 100 cfu/g Coliform bacteria =< 30 MPN/ 100g E.coli/ 5g Negative Listeria monocyto/ 10g Negative Salmonella/ 10g Negative
Natamycin powder 95%, E235, CAS no.7681-93-8, food preservative. Natamycin not only inhibits the growth of different molds and yeasts broadly and high-effectively, but also inhibits the production of their toxin. Common food preservatives, such as sodium benzoate and potassium sorbate just work in high-acidic condition. As an experienced Natamycin 50% in NaCl manufacturer and supplier, we has been supplying and exporting pure Natamycin for almost 10 years, we can also supply other forms of Natamycin. Please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Categories Preservatives Qty in 20' FCL 5600kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E235 CAS No. 7681-93-8 HS Code 294190 Specification FCC/USP Natamycin 95% Specification ITEM STANDARD Appearance Off-white crystalline powder, odorless Identification Complies Purity (%) 95 Loss on drying (%) 6.0~ 9.0 pH (10% solution) 5.5- 7.5 Ash (%) 0.5 Arsenic 3 mg/kg Lead 2 mg/kg Mercury 1 mg/kg Total heavy metals ( as Pb) 10 mg/kg Total plate count 100 cfu/g Coliform bacteria 30 MPN/ 100g E.coli/ 5g Negative Listeria monocyto/ 10g Negative Salmonella/ 10g Negative