DN 300 - DN 4000 PN 1 - PN 40 (can be above per design) SN 2500 - SN 10.000
DN 300 - DN 3000 GRP Jacking Pipes
GRP Fittings
Pipes & ducts are manufactured using the "dual helix" filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall. Nominal diameter Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 25 to 3000 mm. Nominal pressure classes: Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions Nominal lengths Pipes have a length of six meters up to nd150 and 12 meters for bigger diameters. Fittings A wide range of fittings as elbows, reducers, tees, caps, flanges etc. Is available. Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface Prefabrication spools Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.
We supply various types of UPVC pipe fittings including welded fittings there are two kinds of welded and nonwelded socket welded and threaded fittings flange fittings  Ball valve straight pipe straight elbow forward Tee pipe clamp abnormal straight reducing elbow cross loose jointpipe cap copper inner wire straight copper inner wire Tee outer wire direct head loose joint direct head loose elbow double loose ball valve 45 elbow reducing ring external thread plug flange copper inner wire elbow quick joint Y filter glue 1 Fittings used for connecting pipes are flange loose joint pipe hoop clamp sleeve throat hoop etc 2 Fittings change the direction of the pipe elbow bend pipe 3 Fittings change the diameter of the pipe reducing diameter reducing pipe reducing elbow branch pipe reinforcing pipe 4 Fittings increase the pipe branch tee crossing 5 Fittings for pipe sealing gasket raw material belt thread hemp flange blind plate pipe plug blind plate head welding plug 6 Fittings for pipe fixing clamp ring tow hook hanging ring bracket bracket pipe clamp etc Fittings Outter Size OD15OD600mm  Pressure 06MPa25Mpa