Applications
- UV nail polish
- UV varnish or UV inks for paper
- UV undercoat for furniture
- UV coatings for PVC/wood floor
***
Principal Properties
- Curing fast, curing rate is close to the stander epoxy acrylate
- The firm with toughness and hardness after curing
- Cost-effective
- Yellowing resistance is not require
Liquid Ethyl Acetate: Ethyl Acetate is an ester of Ethanol and Acetic Acid, (systematically Ethyl Ethanoate, commonly abbreviated EtoAc or EA) an organic compound having formula CH3COOCH2CH3. Liquid Ethyl Acetate is a colorless solvent has a characteristic sweet / fruity smell. We are a distinguished Liquid Ethyl Acetate Exporter based in India. Liquid Ethyl Acetate, offered by us, is perfect in formulation is well-tested. Further, we welcome bulk orders for Liquid Ethyl Acetate with complete sense of responsibility. Applications: - Ethyl Acetate is used in a variety of coating formulations such as epoxies, urethanes, cellulosic, acrylics and vinyl’s. - Applications for these coatings are numerous wood furniture and fixtures, agricultural, construction and mining equipment, auto refinishing, and maintenance and marine uses. - Ethyl Acetate has applications as a solvent in inks for flexographic and rotogravure printing. - It is used as an extraction solvent in the production of pharmaceuticals and food, and as a carrier solvent for herbicides. - High purity product can be used as a viscosity reducer for resins used in photoresist formulations in the electronics industry.
Crude PGMEA (40- 60 %) + PGMEE (40 - 60 %), moisture 1% max Crude PGMEA, S.G- 0.94, moisture 3% max Toluene (60%) and hexane and other mixtures (40%), moisture 1% max (refer attached GC report) Hexane (70% min) and Kerosene (30% Max), Moisture 1% max Thinner-HPL (refer attached GC report) Methylene Chloride, moisture 1% max Methanol (70% min), Moisture 5% max (refer GC report) MTBE (90% min). moisture 1% max MTBE (60 % min), Kerosene (40% Max), moisture 1% max Surplus and tank bottom materials 2 Ehyl Hexanol ( Octanol) - Refer GC attached 2 Ethyl Hehyl acrylate ( Refer GC attaced) Aromatic Naptha MTBE 90% ,Thinner Hpl. Methylene Chloride
Applications - UV Top Coating for Vacuum Plating; - Plastic UV Coating; PVC UV Top Coating; - Metal UV Coating; - UV ink; - Polish,Harden UV Coating for Wood Flooring and Cabinet Panels; Principal Properties - Solvent Resistance; - Scratch Resistant;Abrasion Resistant; High Hardness; - Curing Fast; - Yellow Resistance ;
Applications - UV Primer for Wood; - UV Varnish /Ink for Plastic/Paper Substrate; *** Principal Properties - Medium Molecular Weight; The Film have Good Flexibility
What is Dimethyl sulfoxide? Dimethyl sulfoxide (DMSO) is an organosulfur compound with the formula (CH3 )2SO. It is an important polar aprotic solvent that dissolves both polar and nonpolar compounds and is miscible in a wide range of organic solvents as well as water. It has a relatively high boiling point. DMSO is widely used in chlorofluoroaniline, acrylic and aromatics extraction, and externally applied agent, inositol nicotinate,antioxidant 1010, synthesis of berberine, esterification accelerator, waterborne paint antifreeze, capacitor, paint remover,trifluoronitrobenzene, sucrose esters of stearic acid, polyvinyl chloride fiber, paraffin refining, alpine region automobile antifreeze, kettle cleaning agent, and pesticide synergist, etc
Dimethyl sulfoxide (DMSO) is an organosulfur compound with the formula (CH3)2SO. This colorless liquid is an important polar aprotic solvent that dissolves both polar and nonpolar compounds and is miscible in a wide range of organic solvents as well as water. It has a relatively high boiling point. DMSO has the unusual property that many individuals perceive a garlic-like taste in the mouth after contact with the skin. In terms of chemical structure, the molecule has idealized Cs symmetry. It has a trigonal pyramidal molecular geometry consistent with other three-coordinate S(IV) compounds, with a nonbonded electron pair on the approximately tetrahedral sulfur atom. Application 1. Used for aromatic extraction, resin and dye reaction medium, acrylic polymerization and solvent extraction. 2. Organic solvents, reactive media and organic synthesis intermediates. 3. Used as analytical reagent and gas chromatographic stationary liquid, and also used as solvent during uv spectrum analysis. 4. Transdermal accelerator. 5. Antifreeze Function 1.DMSO is colorless, odorless and transparent liquid at room temperature. 2.DMSO is a kind of moisture absorption combustible liquid. 3.DMSO has characteristics of high polarity, high boiling point, non-proton, mixed with water, low toxicity and good heat stability. 4.DMSO is soluble in ethanol, propanol,and many organic matters. It was known as"Omnipotent Solvent"
Supplier: Barite , salt , bentonite , meg , deg , butyl glycol , methanol , ethyl acetate , sulfur , vam, butyl acrylate , acrylic acid , caustic soda , waste butanol , waste ethyl acetate , pi gas , c6 , c8 ..........
Services:
Buyer: Glycerine, nitric acid , polymers ,pmi , citric acid , soda ash
HS Code : 29153100 Brief Description: ; Ethyl acetate (also known as ethyl ethanoate) is an organic ester compound. It is a colourless liquid with a fruity characteristic odour that is commonly recognised in glues and nail polish remover. Ethyl acetate is extremely flammable with a flashpoint of -4�° C and a flammability rating of 3 and is also highly miscible with all common organic solvents (alcohols, ketones, glycols, esters) but only slightly miscibility in water. Main Uses/ Industry : " Used in variety of coating formulations such as epoxies, urethanes, cellulosics, acrylics and vinyls. Important solvent for nitrocellulose lacquers Solvent based flexographic and rotogravure inks For production of glues Treatment of aluminum foils In the manufacture of polyester films and BOPP films Flexographic & rotogravure printing on flexible packagings Used in the manufacture of cleaning fluids, nail-polish removers and silk, coated papers, artificial leather, photographic films & plates." Approvals : "ISO 9001:2015 ISO 14001:2015" Cas No : 141-78-6
Polyfunctional aziridine crosslinker sac-100 Crosslinker sac-100 is a 100% active, polyfunctional aziridine liquid crosslinker. Additional of 1-3% to water based acrylic emulsions or urethane dispersion produces a marked improvement in water, chemical, abrasion and humidity resistance and enhances adhesion to specific substrates. Crosslinker sac-100 is room temperature reactive and therefore can be used under air and forced drying conditions. Typical properties Type polyfunctional aziridine crosslinker Appearance clear yellowish liquid Total solids (w/w %) >99 Viscosity brookfield (25) 200mpa.S Ph (25) 8-9 Density (20) 1.08kg/l Stability (20) 6 months Water tolerance (%) >100 Solubility complete in acetone, xylene, isopropanol n-butyl acetate, carbitol, butyl carbitol Recommendations for end-use -in water based parquet lacquers to improve water, alcohol, detergent, chemical and abrasion resistance. -in water based industrial wood-, plastic- and metal coatings to increase water, alcohol and block resistance. -in vinyl coatings to reduce plasticizer migration and improve stain resistance. -in water based concrete sealers to improve abrasion resistance. -generally, to improve adhesion of water based systems to non-polar substrates. -in solvent based polymers to increase resistance properties. -in water based printing inks to improve water and detergent resistance. Lott:25kg/pel
