Possessed with high density, high hardness, low wear, good seismic stability and good corrosion resistance, the products are the most ideal medium for grinding glaze, blank and mineral powder processing, and are used as the grinding medium of ball mill in ceramics, cement, paint, refractory.
Specification:
> Appearance : Faint Yellow,
> Al2o3 : 67.9 %,
> Bulk Density : 2.96g/cm3,
> Self Wearing (Within 24hrs) : 0.04%,
> Water Absorption : 0.008%,
> Use Raw Material : Fining High bauxite,
> Temperature : 1400-1600 C
Ball clay, or plastic clay as it is also known, is an extremely rare mineral, only found at a handful of locations around the world. It is a kaolinitic clay that commonly consists of 20 - 80% kaolinite, 10 - 25% mica, 6 - 65% quartz as well as organic matter. Ball clay is formed from the weathering and transportation by water of parent rocks which are deposited in ancient river basins from where it is extracted. Applications: - Ball clays are prized for the production of traditional ceramics such as sanitaryware, tableware, wall and floor tiles as well as for technical ceramics and electrical porcelains. Ball Clay products are immensely used in the manufacturing of Ceramics, Sanitaryware, Vitrified Tiles, Glazes and Engobes ultramarine and in various other purposes. As per requirement Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. BRIGHTNESS: - 96+ AS PER REQUIREMENT Index Compound Result 1. Silica - (SiO2) 50 - 65 % 2. Alumina - (AI2O3) 20 - 35 % 3. Iron - (Fe2O3) 0.33 - 2 % 4. Titanium - (TiO2) 0.31 - 3 % 5. Potash - (K2O) 0.19 - 2 % 6. L Value 60 - 88 %
Supplier: Refractory alumina products like bricks, castables and mortars from 30 up to 95% alumina, refractory magnesia products like ramming, gunning, spray mass, back filling and magnesia carbon bricks, silica ramming mass, mineral raw materials, including refractory calcined kaolin (37 41% alumina), sanitary ware chamotte (36 40% alumina), calcined dolomite (50 60% cao & 30 35% mgo), calcined lime (80 90% cao), ball clay (25 30 alumina), scrap crushed of alumina and magnesia spinel bricks, synthetic fluorspar (caf2), black carbon
Services: Installation services
Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20
Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for manyapplications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 66 68 2. Alumina - (AI2O3) % 17 18 3. Iron - (Fe2O3) % 0.03 0.06 4. Titanium - (TiO2) % 0.03 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 3 8. Potash - (K2O) % 10 12 9. Loss on Ignition - (LOI) % 0.10 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 â?? 72 2. Alumina - (AI2O3) % 17 18 3. Iron - (Fe2O3) % 0.10 0.15 4. Titanium - (TiO2) % 0.03 0.06 5. Calcium - (Cao) % 0.05 0.20 6. Magnesium - (MgO) % 0.10 0.15 7. Soda - (Na2O) % 9 10 8. Potash - (K2O) % 0.50 0.20 9. Loss on Ignition - (LOI) % 0.10 0.20
GGBFS Ground granulated blast furnace slag (GGBFS) The ground granulated blast furnace slag (GGBFS) is a by-product of iron manufacturing which when added to concrete improves its properties such as workability, strength and durability. This material is obtained by the heating of iron ore, limestone and coke at a temperature about 1500 degree Celsius. The process is carried out in a blast furnace. The formation of GGBFS is not direct. The by-product of iron manufacturing is a molten slag and molten iron. The molten slag consists of alumina and silica, also with the certain amount of oxides. This slag is later granulated by cooling it. For this, it is allowed to pass through a high-pressure water jet. This result in quenching of the particles which results in granules of size lesser than 5mm in diameter. The main constituents of blast furnace slag are CaO, SiO2, Al2O3 and MgO. These are the minerals that are found in most of the cementitious substances. The particles are further dried and ground in a rotating ball mill to form a fine powder, known as ground granulated blast furnace slag cement. Now different methods can be employed to perform the main process called as the quenching. Applications & Benefits of GGBFS: In concrete: The incorporation of ground granulated blast furnace slag in concrete manufacture gains many advantages which are mentioned below: GGBFS in concrete increases the strength and durability of the concrete structure. It reduces voids in concrete hence reducing permeability GGBFS gives a workable mix. It possesses good pumpable and compaction characteristics The structure made of GGBFS constituents help in increasing sulphate attack resistance. The penetration of chloride can be decreased. The heat of hydration is less compared to conventional mix hydration. The alkali-silica reaction is resisted highly. These make the concrete more chemically stable. Gives good surface finish and improves aesthetics. The color is more even and light. Lower chances of efflorescence. The maintenance and repair cost of structures are reduced thus increasing the life cycle of concrete structures. Unlike cement, GGBFS does not produce carbon dioxide, sulphur dioxide or nitrogen oxides. White Cement: White Portland Cement is of high quality, whiteness and strength, it essentially has the same properties and characteristics as gray cement, except for color. It is widely used in numerous applications such as precast concrete, cast-in-place concrete, terrazzo, median barriers, curbs, tile grout, paint, masonry units, swimming pools, glass fibre reinforced surface bonding mortars.
Product: 99% alumina ball Chemical composition: Sio2 0.15-0.2 Mgo 0.03-0.05. Al2o3 99-99.2 Cao 0.04-0.07. Fe2o3 0.05-0.2 K2o 0.1-0.15 Tio2 0.15-0.2 Na2o 0.2-0.25 Soluble fe:
Mineral Raw and Calcined Materials including - Calcined Kaolin (37-41% Alumina) - Sanitary Ware Chamotte (36-40% Alumina) - Calcined Dolomite (50-60% Cao & 30-35% Mgo) - Calcined Lime (80-90% Cao) - Ball Clay (25-30 Alumina) - Scrap Crushed of Alumina and Magnesia-Spinel Bricks - Synthetic Fluorspar (Fluorite) (Calcium Fluoride) (CaF2) - Black Carbon Key Specificartions - we can supply also Mineral Raw and Calcined Materials that can be used as raw materials in some industries like Refractory industry, Sanitaryware industry, white Cement industry, Steel industry, ....etc
We have carved a niche in the industry as the Exporter and Supplier of Activated Alumina Balls from Gujarat, India. The Alumina Balls offered by us are highly appreciated by customers in both domestic and international markets. To ensure customer satisfaction, we conduct various tests on the Alumina Balls before approving them for dispatch. We are offering high-grade Activated Alumina Balls to customers at modest rates.
Alumina balls with the advanced production facilities, high technology, and abundant production experience. The alumina content could be 75%, 90%, 92%, 99%. The main production processing is super-fine powder grinding, cool- 90% microcrystal alumina lining bricks 75% alumina ball(cip) 75% alumina ball(rolling) 75% alumina beads for chemical industry 99% alumina ball for chemical industry 90% microcrystal alumina liner
