Gas Oil D2

Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS

Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS

Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS

Origin: Kazakhstan MOQ: 50,000 MT/mth x 12 mths Max. Quantity: 900,000 MT/mth x 12 mths

GOST 305 - 82

D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude oil, and can be used without reformers and additives. So, the first engines used D2 as fuel before petrol cars as we know them today was invented. That is because the engine invented by a German called Diesel, requires no spark plugs. The diesel engine will ignite and combust when the pressure increases so that the heated plug makes it explode. Here we get the name Diesel since the same principles are used in diesel engines today. However, automotive diesel that you fill has additives that the refinery will add to make the engine more efficient and also easier to start in the winter. Diesel changes flash point in the winter. It also has additives to absorb water that condense. If you use summer diesel in the winter, you will get better mileage, but your fuel pipes may freeze and can also burst, and the wax makes the diesel flow thicker.

KAZAKHSTAN DIESEL GAS D2 OIL GOST 305-82 Quantity: 50,000-500,000 Metric Tons CIF Price: Gross $420USD per Metric Ton / Net $410USD per Metric Ton. FOB Price: Gross $410USD per Metric Ton / Net $405USD per Metric Ton COMMISSION: $5 SELLER SIDE / $5 BUYER SIDE TERMS & OPERATIONAL PROCEDURE: C.I.F 1. Buyer issues ICPO must be with buyer company letterhead and buyer banking information. 2. Seller issues Draft Contract (open for any amendments) to Buyer. Buyer signs, seals and returns the Draft Contract to Seller for final endorsement with letter of acceptance. Seller gives Partial proof of products. (A) Certificate of Origin (B) Product quality passport (Analysis test Report) By KAZAKHSTAN standard gost R (C) Commercial Invoice (D) Statement of availability of product 3. Within 7 banking days, Buyers bank sends Transferable SBLC, DLC, BG via MT760/MT700 Letter Credit according to sellers fiduciary bank verbiage to seller nominated fiduciary offshore bank account for first month shipment, should buyer fail to issue payment instrument within 7 banking days, buyer will make cash deposit of $ 400,000 by TT wire transfer for security guarantee to enable seller charter vessel and commence shipment, and this payment will be deducted from the total cost of product after inspection at discharge port, Sellers Bank issues Full POP Documents to the Buyers Bank alongside with the 2% Performance Bond (PB) a) Copy of license to export, issued by the department of the Ministry of Energy, KAZAKHSTAN Federation. b) Copy of Approval to Export, issued by the Ministry of Justice, KAZAKHSTAN Federation. c) Copy of statement of availability of the product. d) Copy of the refinery commitment to produce the product. e) Copy of Transnet contract to transport the product to the loading port. f) Copy of the port storage agreement. g) Copy of the charter party agreement to transport the product to discharge port h) Copy of Vessel Questionnaire 88. i) Copy of Bill of Lading. j) SGS Report at loading port. k) Dip test Authorization (DTA) & ATB l) NOR /ETA m) Certificate of Ownership Transfer n) Allocation Transaction Passport Code Certificate (ATPCC) by Ministry of Energy Shipment commences as per signed contract delivery schedule and the shipment should arrive at Buyers discharge port within 5- 25 days. The SGS inspection will be borne by the Seller at the loading seaport and Buyer at the unloading seaport. 4. Buyer releases payment to Seller by TT/MT103 upon receipt of the shipping documents and confirmation of the Q & Q by SGS/CIQ at destination port. 5. Seller pays commission within 48 hours by swift MT103 to all intermediaries as signed NCNDA/IMPFA.