The plate heat exchanger is composed of a set of corrugated metal plates with four corner holes for the passage of two liquids for heat transfer. The metal sheet is mounted in a frame having a fixed plate and a movable pressing plate on one side and clamped by a clamp bolt. A gasket is placed over the plate to seal the fluid passages and direct fluid flow alternately into the respective passages to form a heat exchange.
The flow, physical properties, pressure drop and temperature difference of the fluid determine the number and size of the plates. The corrugation of the plate not only increases the degree of turbulence but also forms a number of support points sufficient to withstand the pressure difference between the media.
The metal plate and the movable compression plate are suspended on the upper guide bar and positioned by the lower guide bar, while the rod end is fixed on the support. On the column, but if one or both of the liquids pass through the heat exchanger more than once, the interface should be on the fixed plate and the movable compression plate. In most cases, one-way is used, and all the pipes are connected to the fixed platen. On, check the shoes to open the heat exchanger without disassembling the pipe.
Plates & Gaskets For Heat Exchanger 1.Raw material purchases from the same factory with famous brands like Alfa Laval, GEA, Funke etc. 2.Plates produced by precision molds and advanced press machine that detect & correct regularly. 3.Adpot same production and technology with Gislaved Gummi to ensure gasket quality. Plates material: SS304, SS316, SS316L, Titanium, Ti-Pd, Hastelloy-C276, Nickel, 254 SMO, 904L. Plates thickness: 0.5mm - 1.2mm Gaskets material: NBR, EPDM, HNBR, HT-NBR, HEPDM, VITON/FKM, FDA sanitary Hanging method: Glued, Hang on, Clip on, Snap in, Paraclip, Sonderlock. *Other materials may be available on request.
Plate heat exchanger
Working Temperature - +200'C ~ - 200'C Max Pressure - up to 45 Bar Thickness - 0.3 mm SS316L, Cu - 99%; SS304 - optional
Brief introduction: Plate heat exchanger is a new type of high efficiency heat exchanger which is made of a series of corrugated metal sheets. A thin rectangular channel is formed between the plates, through which the heat exchange between liquid, liquid and vapor can be achieved. Advantages of plate heat exchangers compared with tube heat exchangers: 1. Efficient and energy-saving: its heat transfer coefficient is 3000-4500kcal/m2* h, which is 3-5 times higher than that of shell-and-tube heat exchangers. 2. Compact structure: plate heat exchanger with the same area and heat exchange is only 1/5 of shell and tube heat exchanger. 3. Easy to clean, easy to assemble and disassemble. 4. Long service life: Plate heat exchanger is pressed by stainless steel or titanium alloy plates, which can resist various corrosion media, and the rubber pad can be replaced at will. 5. Strong adaptability: Plate heat exchanger plate is an independent component, can be added or subtracted according to the requirements, can be applied to a variety of different, process requirements. 6. No liquid crossing: The sealing groove of the plate heat exchanger is equipped with a discharge channel, and all kinds of medium will not be in collusion.
Beijing Huaaixin Energy Saving Equipment Co., Ltd. established in 2003, is a professional manufacturer of heat exchanger. Our products are widely applied in petro-chemical, food, ships, nuclear power, pharmaceutical, Residential Heating System , electricity generating station, Industrial heating exchange system and other fields. Our products list include Plate heat exchanger, All welded plate heat exchange, Brazing heat exchanger, Heat exchanger unit, Fully automatic water processor, full integrated water processor, HX series electronic water processor, Enamel steel plate combined water tank.
Not only can we provide you with plate heat exchanger , but also we can help you to choose suitable one according to the parameter offered. We engage in design, development, manufacture and consulting service. Our plate heat exchanger can be used in the field of air-conditioner, electric power, petroleum chemicals, boats and ships, food and drinks, iron and steel , recycling of the heat. We dedicate ourselves to the design, manufacture and service of the phe, providing a solution and high-quality products and service for clients according to different fields and conditions.
A spiral heat exchanger refers to a pair of flat surfaces that are coiled to form the two channels in a counter-flow arrangement. Each of the two channels has one long curved path. The main advantage of this device is its highly efficient use of space.
Plate heat exchanger is an ideal equipment for heat transmitting of liquid and air, suitable for various types of drinks and industry liquid in the produce of heating, sterilization, cooling, vapouring, condensation and heat recovery. It is widely applied in the light industry, food, medicine, textile, chemical air conditioning and heating. Model BR0.05-1.0-0.5~5-ES-IIBJ(Z) Series: Plate Dimension: 490¡Á170¡Á4.7mm Heat Exchanger are Single Piece(m2): 0.05 Angel Hole Diameter: ¦µ38mm Exchange Area per Set (m2): 0.5~5 Max. Working Pressure: 1Mpa Max. Working Temp.: 120~150(¡æ).
Plate heat exchanger
Brazed plate heat exchanger Bl14 n means number of plates Length (mm): 206 Width (mm): 76 Thickness (mm): 10+2.3n Weight (kg): 0.7+0.06n Channel volume (l): 0.010(n-2) Exchange area (m2): 0.014(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc Bl14a n means number of plates Length (mm): 190 Width (mm): 80 Thickness (mm): 10+2.3n Weight (kg): 0.9+0.06n Channel volume (l): 0.010(n-2) Exchange area (m2): 0.014(n-2) Working pressure: 3.0mpa Testing pressure: 4.5mpa Working pressure: -160grc ~ 225grc
