I.Introduction
The air driven-liquid booster system is controlled by PLC and outputs a liquid pressure of 0-64MPa according to requirements. Equipped with OGD80 gas drive liquid pump, low pressure pressure gauge, high pressure holding pressure switch, unloading switch, push-button start switch, PLC touch screen control system, can set the upper and lower pressure, and the holding time, if the holding pressure is lower than The lower limit pressure indicates failure, and the buzzer alarms. If it does not fall below the lower limit pressure, it indicates that the test is qualified.
Equipment functions
1. Pressurize the pressurized medium water or oil, and the supercharged pressure is controlled within the allowable division;
2.1 ~ 64MPa liquid test: compressed air controls the driving pressure through the pressure reducing valve, and the compressed air drives the supercharger to perform pressure conversion to output high-pressure liquid;
3. The test pressure can be set within the range of the test. When the test is achieved, the test can be automatically stopped and the alarm beep completed.
4. During the test, if there is a leak or the pressure is too high, it can automatically stop and alarm;The test bench is equipped with an emergency button. In case of an accident, you can press the power to immediately unload and stop the test.
II.Equipment performance parameters
III.Test bench structure
IV.Layout of Machine for reference.
V.Technical Parameter of MLS-OGD80WAir driven liquid booster pump
Supplier: Air compressors, automation equipment, bearings, cables, diesel engines and generators & machinery spare parts, filters, electrical equipment's, electric motors and gear motors, panel boards and & much more.
Services: Logistics, customer clearance and much more.
Buyer: Air compressors, automation equipment, bearings, cables, diesel engines and generators & machinery spare parts, filters, electrical equipment's, electric motors and gear motors, panel boards and & much more.
Supplier: Air conditioner spare parts , compressors , gases and motors.
Buyer: Air conditioner spare parts , compressors , gases and motors.
Screw type air compressor (Used) Capacity :28.12 cu.m/min RPM:1741 Discharge pressure 7.03 kgf/su.cm.G Volts:440v MFG Date:2010.11 very nice (Super) condition
Air Compressors for all commercial vehicles
Air Compressor
Air Compressor
We can produce various pneumo-hydraulic pressurization systems according to customers requirements. These systems can be used for pressure tensioning, hydraulic drive and control, hydraulic test, etc. The maximum pressure can be up to 6400bar. ODMT Pneumo-hydraulic Pressurization System has compact structure and is easy to operate. What the users need to do is only to lead the drive air to the liquid port, then adjust the pressure regulating valve of the drive circuit to reach the needed working pressure. Typical liquid pressurization operation: Typical applications: Static and burst test for valves, pipe fittings, etc. Test for automobile brake system and nozzles. Chemical reagent injection into pipelines or reaction kettles. Putting coolant into jars. Providing force for clamping, forming, drilling, shearing and stamping machines. Providing buffer and lift force to protect molds when large presses overload. Static and dynamic test for aviation accessories. Performance test and calibration for instruments. High pressure cleaning and water injection of waterjet cutting equipment. Injecting oil into lubrication system of mechanical equipment. Providing clamping force for valve test. Providing press force for shaft sleeve and cylinder liner. Controlling ground and underground safety valves.
Air Conditional and Fridge Compressor Scrap
Supplier: Air compressor (screw type air compressor, piston air compressor, centrifugal air compressor), Compressed air dryer, refrigerated air dryer, desiccant/absorption air dryer, absorbic air dryer, regenerative air dryer, (compressed) air filter, filter separator, oil water serapator, filter element, air cooler, air chiller, air condenser, Industrial water-cooling set, and relative spare parts
Services: Engineering consultant, model choosing suggestion, installation project, after-service
