Please click here to check who's online and chat with them.

Double Studded Adapterdsa)

Supplier From China
Apr-06-20

Description:
Double Studded Adapter Flange (DSAF) or Double Studded Adapter (DSA) is a flange with a through bore and a ring groove on each side, drilled and tapped bolt hole sets on both sides and tapped end studs complete with nuts fitted on both sides. Unlike a spacer, the two sides are usually different in size and/or pressure rating. Double studded adapter flanges are commonly utilized to connect and adapt flanges with different nominal sizes, pressure ratings, and configurations. We also produce and supply other types API 6A flanges, such as threaded flanges, spacer spool flanges, blind flanges, companion flanges, target flanges, test flanges, and adapter spools for all cli


Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Double Studded Adapterdsa)

Dec-31-19
 
Double Studded Adapter Flange (DSAF) or Double Studded Adapter (DSA) is a flange with a through bore and a ring groove on each side, drilled and tapped bolt hole sets on both sides and tapped end studs complete with nuts fitted on both sides. Unlike a spacer, the two sides are usually different in size and/or pressure rating. Double studded adapter flanges are commonly utilized to connect and adapt flanges with different nominal sizes, pressure ratings, and configurations. We also produce and supply other types API 6A flanges, such as threaded flanges, spacer spool flanges, blind flanges, companion flanges, target flanges, test flanges, and adapter spools for all client needs
Dec-06-05
Supplier From Rajkot, Gujarat, India
Apr-17-19
 
YT round circle self-fluorescent double sided road stud with reflective film
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.


Product Code

YF05

Product name



YT round circle self-fluorescent double sided road stud with reflective film

Material

ABS+reflective film+Nano-fluorescent material

Color

white/ yellow/ red/ green/ black

Size

Ï?100mmÃ?11mm

Weight

88g

Application

reflective panel, road stud, delineator, speed humb, etc,

Feature

light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application

Payment terms

T/T, L/C, Western union, Trade Assurance

YF05 (6)YF05 (2)YF05 (5)YF05 (6)YF05 (1)YF05 YF05 (2)YF self-luminating series

table of brightnessYetong road studplastic road stud_application

Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
Nov-03-22
Supplier From Delhi, Delhi, India
Apr-17-19
 
YT Nano-fluorescent self-luminous cat eye road stud delineator with glass beads
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.


Product Code

YF10

Product name

YT Nano-fluorescent self-luminous cat eye road stud delineator with glass beads

Material

ABS+glass beads+Nano-fluorescent material

Color

white/ yellow/ red/ green/ black

Size

110mmÃ?110mmÃ?66mm

Weight

138g

Application

reflective panel, road stud, delineator, speed humb, etc,

Feature

light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application

Payment terms

T/T, L/C, Western union, Trade Assurance

YF10 (2)YF10 (3)YF10 (5)YF10 (4)YF10 (1)YF10 (1)YF10 (3)YF self-luminating series

table of brightnessYetong road studplastic road stud_application

Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
Apr-17-19
 
YT transparent self-luminous ABS road stud delineator as a traffic signal
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.


Product Code

YF14

Product name

YT transparent self-luminous ABS road stud delineator as a traffic signal

Material

ABS+PMMA+Nano-fluorescent material

Color

white/ yellow/ red/ green/ black

Size

180mmÃ?48mmÃ?40mm

Weight

120g

Application

reflective panel, road stud, delineator, speed humb, etc,

Feature

light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application

Payment terms

T/T, L/C, Western union, Trade Assurance

YF14 (6)_YF14 (1)_YF14 (6)YF14 (1)YF14 (1)_YF14 (1)YF14 (2)YF self-luminating series



table of brightnessYetong road studplastic road stud_application

Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
Apr-17-19
 
YT hangzhou energy storaged square self-luminous road stud with cat eyes
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.


Product Code

YF01

Product name

YT hangzhou energy storaged square self-luminous road stud with cat eyes

Material

ABS+glass beads+Nano-fluorescent material

Color

white/ yellow/ red/ green/ black

Size

130mmÃ?110mmÃ?15mm

Weight

150g

Application

reflective panel, road stud, delineator, speed humb, etc,

Feature

light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application

Payment terms

T/T, L/C, Western union, Trade Assurance

YF01 YF01 YF01 (4)YF01 (1)YF01 (5)YF01 (5)YF01 (3)YF self-luminating series





table of brightnessYetong road studplastic road stud_application

Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
Apr-17-19
 
YT yellow shell self-luminous rectangle reflector road studs with cat eye
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.


Product Code

YF03

Product name

YT yellow shell self-luminous rectangle reflector road studs with cat eye

Material

ABS+glass beads+Nano-fluorescent material

Color

white/ yellow/ red/ green/ black

Size

130mmÃ?110mmÃ?15mm

Weight

165g

Application

reflective panel, road stud, delineator, speed humb, etc,

Feature

light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application

Payment terms

T/T, L/C, Western union, Trade Assurance

yf03_YF03 (1)YF03 (9)YF03(8)YF03 (7)YF03 (4)YF04 YF03 (3)_YF self-luminating series
table of brightnessYetong road studplastic road stud_application

Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
Apr-17-19
 
YT square self-fluorescent traffic safety cat eye road stud with crystal beads
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.




Product Code

YF02

Product name

YT square self-fluorescent traffic safety cat eye road stud with crystal beads

Material

ABS+glass beads+Nano-fluorescent material

Color

white/ yellow/ red/ green/ black

Size

130mmÃ?110mmÃ?15mm

Weight

165g

Application

reflective panel, road stud, delineator, speed humb, etc,

Feature

light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application

Payment terms

T/T, L/C, Western union, Trade Assurance

YF02YF023 (6)_YF01 YF02 YF03 YF04 (1)YF01 YF02 YF03 YF04 (1)_YF self-luminating series



table of brightnessYetong road studplastic road stud_application

Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.

Verification Status