Eps Hot Melt Ingots

4-Hydroxybenzoic acid Chemical Name:4-Hydroxybenzoic acid Trade Name:p-oxybenzoic acid Molecular Formula:C7H6O3 Molecular Weight:138.12 CAS No.:99-96-7 Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone, slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46 Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate Specification Item Specification Polymer Grade Technical Grade Appearance white crystal powder white crystal powder Purity(on dry base) % 99.6 99.0 Melting Point 214-217 212-216 Odor odorless odorless Solubility Clear and transparent clear and transparent Loss on Drying % 0.20 0.50 Color(Pt-Co) 10 40 Ash % 0.02 0.15 Sulfate(SO42-) 0.01 0.05 Chloride(Cl-) % 0.005 0.02 Phe% 0.01 0.10 Salicylic Acid % 0.02 0.10 4-Hydroxyisophthalic Acid(HIPA) ppm 500 / Insolubles in Metha ppm 50 / Potassium(K+) ppm 5 / Sodium (Na+) ppm 5 / Iron (Fe) ppm 5 / Ca2++Mg2+ppm 5 /

1. Chemical Name: Sodium Pyrophosphate 2. Formula: Na4P2O7, Na4P2O7, 10H2O 3. Molecular weight: 265.90, 446.06 4. Specificity: Colorless or white crystals, crystalline or granular powder. It is easily soluble in water, but is insoluble in alcohol. Density: 2.45, relative density: 2.45, melting point: 890? . The decahydrate effloresces slightly in dry air. pH of 1% solution is about 10. 5. Quality Standard: 6. Usage: It is mainly used as detergent, electroplating . ctFor food grade it is mainly used as emulsifier, buffer, nutrient, sequestrant, texturizer 7. Packing: 25kgs net paper or plastic woven bags. 8. Storage and Transport: It should be stored in a dry, ventilative and clean warehouse kept away from moisture and hot, Furthermore, it should be stored separately from poisonous Substances.

English Name : Ethylene diamine tetraacetic acid (EDTA) Molecular Fomula : C10H16N2O8 Molecular Weight : M=292.24 CASNo. : 60-00-4 Properties : white crystal powder melting point 240(decomposition) insoluble in cold water ,alcohol and general organic solvent, slightly soluble in hot water, but soluble in sodium hydroxide, sodium carbonate and ammonia solution. An agent for complexation, EDTA is mainly used for water treatment, as an additive to detergent, a chemical for photography, paper-making and oil-field. It is also used as detergent for boiler cleaning and reagent in chemical analysis. 1. High molecular chemical industry: EDTA is used as polymetization activator for butyl bezene latex, and polyreaction terminator in acrylic fibre production. 2.Daily chemicals: EDTA is used as additive to detergent, skin cream and hair-conditioner. 3.Paper-making: EDTA is used for treating the steamed fibre. It will promote the whiteness of paper and reduce the incrustation in the steamer. 4.Pharmaceutical industry: Through cyclopolymerization with methyl amide, EDTA is made into ethyl amide, a remedy for psoriasis. It is also a stablizer for some vaccines and an antihaemoagglutinin. 5. Textile dyeing and printing: EDTA will promote colour ability of the dyestuff and brightness of the dyed fabric. Package of Disodium edta zinc chelated Packing: 25KG/bag , Pearly membrane compound bag, with PE inside or according to the customers demand. Storage: Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down.

1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc. 2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products. 3.Polyethylene glycol series products can be used as raw materials for ester surfactants. 4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry. 5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface. 6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler. 7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity. 8.PEG-4000 and PEG-6000 . 9.PEG8000 .

4-Chloro-3,5-dimethyl is a white crystalline powder. Melting point 115-116 C, boiling point 246 C. At 20 C, 1g can be dissolved in 3L water, 1 part of 95% alcohol, ether, benzene, terpenes, non-volatile oils. It has a slight smell and can volatilize with water vapor. Stable in hot water.