AUTOCLAVED AERATED CONCRETE PANELï¼?AACï¼? ALC/AAC panel
1. Light weight: Bulk density 425ï½?625kg/m³, Only for 1/4 concrete, 1/3 Clay brick, The weight of the building can be greatly reduced, and the design value is reduced too.
2. Fire resistance: 125mm AAC panel fire resistance can reach more than 4 hours, It is real fire prevention material in Grade A.50mm AAC panel can be met the fire protection requirements of steel structural members.
3. Anti crack: The shrinkage value of natural state is smaller than that of the clay brick, and the special technology is adopted to solve the problem of the quality of the slab cracks.
4. Thermal insulation: thermal insulation is only 0.11ï¼?B04ï¼?, It is a new type of building material that can meet the building energy saving more than 65% by a single wall.
5. Seismic resistance: Allowable inter layer deflection angle 1/150, When the special node is used to achieve 1/120, In the case of all the nodes, the panel will not fall off when the 1/20 is changed in the layerï¼?So that the anti-seismic effect is excellent.
6. Environmental protection: No radiation, Both the internal and external illumination coefficient are less than 0.1, is 1/4 of Fly ash board, Excellent sound insulation performance, 100mm AAC panelï¼?Double sides puttyï¼?could reach 40.8dB, The sound insulation effect of is similar with 200mm fly ash brick wall.
7. Bearing capacity of Autoclaved Aerated Concrete Panel: The plates are equipped with internal double layers, two-way mesh reinforcement, can produce wall panels, partition wall, floor decking, roof board, decorative board etc..
8. economical: Using AAC board as the wall material, can effectively improve the use of the building area, reduce the use of energy consumption, to achieve the national building energy efficiency standards. Under the same sound insulation and fire protection requirements, AAC plate thickness is the smallest, and don't required the tie column, waist beam and other auxiliary components, This can reduce the wall load, thereby reducing the cost of construction.
9. Extensive: Can be used for concrete structure, steel structure residential buildings, office buildings, building internal and external wall body, floor slab, roof panel, firewall, explosion-proof wall, structural steel beams and columns fire maintenance, soundproof walls, old buildings and renovation.
10. Convenience: Eliminating the traditional building blocks in the process of the type of work, such as Mixing, masonry, plastering, reinforcement, formwork and concrete etc. Just the plate installation workers can do all the work, Avoid the conflict of work and mutual restraint.
Special Aeration Liner longitudinal panel with zonal aeration system with aeration zonal pipe throughout the floor Body Film P.E 140, 150 & 170 Micron a. Rear End loading spout and vent spout b. Rear End bottom rectangular discharge spout c. For discharge spout membrane juta strap sewn d. Rear Bulk Head with P.E sleeve sewn at top and bottom of the discharge window cut area e. Front End Batten pocket with bar locking attachment f. Ceiling disk + Rubber band
Raw Materials: Cement, Quartz Sand, Fiber Size: 1220*2440mm / 1200*2400mm Thickness: 4.5mm~25mm Density: 1350±10~1550±10 g/cm3 Fire Resistance:Incombustibility A1 Class Color: Grey/White/Black/Yellow/Light Green/Red Certificate: ISO9001,CE,COC,SONCAP Application: Partition System, Suspended System
Supplier: ALC wall panel, alc decking panel, aac block, supper lighweight autoclaved airated concrete
Services: Export
Concrete Wall Panel Extrusion Machine Concrete Wall Panel Extrusion Machine Description A concrete wall panel extrusion machine is a specialized piece of equipment used in the construction industry to produce concrete wall panels through the extrusion process. It is designed to automate the manufacturing of precast concrete wall panels with consistent dimensions and high-quality surface finishes. The working principle of a concrete wall panel extrusion machine involves the following steps: Concrete mixing: The machine is equipped with a concrete mixing system that combines cement, aggregates, water, and any necessary additives or admixtures. The ingredients are mixed thoroughly to achieve a homogeneous concrete mixture. Formwork preparation: The machine has a formwork system that consists of a set of molds or templates. These molds are designed to shape the concrete into the desired dimensions and surface textures of the wall panels. The formwork is prepared by applying release agents or other treatments to facilitate easy removal of the panels later. Extrusion process: The concrete mixture is fed into a hopper or a conveyor system that transfers it to an extrusion chamber or a specially designed die. The extrusion chamber applies pressure to the concrete, forcing it through the die. As the concrete passes through the die, it takes on the shape and dimensions of the wall panel, with the desired surface patterns or textures imprinted onto it. Reinforcement and embedding: Depending on the design requirements, the machine may incorporate reinforcement elements such as steel bars or mesh into the extruded concrete. These reinforcements enhance the strength and structural integrity of the wall panels. Other embedded elements like electrical conduits or insulation materials may also be included during the extrusion process. Curing and finishing: Once the wall panels are extruded, they need to be cured to achieve the desired strength. Curing methods can include steam curing, thermal blankets, or other techniques. After curing, the panels may undergo finishing processes such as surface treatments, polishing, or the application of protective coatings to enhance their appearance and durability. Panel cutting and handling: Once the panels have achieved the required strength, they are cut to the desired lengths using cutting mechanisms integrated into the machine. The cut panels are then removed from the formwork and prepared for transportation and installation at the construction site. If you have needs, please choose Lingfeng
3 Layer Shuttering Panel Wood: Chinese Fir Structure: Three crosswise glued layers Thickness: 27mm 21mm Width: 500mm Length: 970, 1000, 1500, 1970, 2000, 2500, 3000mm Glue: Water-repellent of melamine or WBP glue Packing: package prepared for loading with a forklift Number of layers : three layers Process of edges: waterproof of paint pallet
Three Layer Shuttering Panel Wood: Chinese Fir Structure: Three crosswise glued layers Thickness: 27mm 21mm Width: 500mm Length: 970, 1000, 1500, 1970, 2000, 2500, 3000mm Glue: Water-repellent of melamine or WBP glue Packing: package prepared for loading with a forklift Number of layers : three layers Process of edges: waterproof of paint pallet
PVC SANDWICH WALL PANEL board with high impact strength and moisture and fire resistant properties Krs PVC SANDWICH WALL PANEL is the perfect choice for building board applications such as wall cladding, wall partitioning and decorative walling. The types of buildings that are suitable for krs board applications are residential, commercial and industrial buildings as well as schools and hospitals; especially where speedy construction, cleanliness and hygiene is of high importance. Benefits of krsPVC SANDWICH WALL PANEL: weather resistant immune to water damage fire resistant provides sound insulation shatter resistant low shrinkage flexible high degree of workability termite resistant Matching the demands of modern applications PVC SANDWICH WALL PANEL is a non-asbestos fibre-cement product composed of portland cement, cellulose fibre and refined sand. Using a special manufacturing process called autoclave, fiber cement board acquires the strength, durability of cement and easy workability of wood as well as dimensional stability. A non-combustible multi-purpose application fibre-cement flat board, fiber cement board comes with various thicknesses which are suitable for various applications; ceiling, wall, and floor. It can be used for both exterior and interior applications. Krs boards can perfectly be calibrated and then laminated or coated with other materials, such as eg. Wood veneer.
Ubest three ply shuttering panel: Glue: muf glue Material: fir Packing: in pallet prepared for forklift. Thickness: 27mm, 21mm, Width: 500mm Length: 970, 1000, 1500, 1970, 2000, 2500, 3000, 4000, 5000, 6000mm. Tolerance on length and width (mm: -/+3); +/-0.5 Moisture content: less than 10% Abrasive: less than 0.1g/100r Elasticity: more than 5500mpa Static bend: more than 28mpa Thickness swelling (72 hours in water): less than 6% Density: 425kgs/m3 H.S code: 44129499.90 Depending to the quantity and thickness and size
Temploc is a thermal laminate panel designed to provide comfort by conserving the ambient temperature within a space. A new generation of composite thermal panels with high insulation. Temploc is composed of a gypsum board, fiber cement board, or a hybrid board glued to an insulation backing made of expanded polystyrene (EPS) or extruded polystyrene (XPS). Advantages: The thermal boards are composite panels made of two shells: your choice of Gypsum/Fiber cement/Hybrid boards and Inulation material Whether the temperature inside the envelope increases or decreases, Temploc's thermal insulation uses the energy of the medium at a temperature lower than indoors and higher than outdoors Temploc panels are installed using the dot and dab method, a dry lining method designed for easy and fast mounting of panels to concrete or masonry blocks. No metal frames needed Edge Types: Squared Tapered