Working Principle: when the host tilts or falls, the ball inside the anti-dump switch is tilted and displaced along with the housing under the action of gravity. The tablet is restored to its original position due to the detachment of the ball, and the switch is instantly disconnected, thereby reach the purpose of cutting off the power or circuit.
Rating voltage: DC5V
Output signal: High or low voltage
Size: Φ15.5
Title angle: 30±5°
Reset angle: 70±5°
Response angle: 360°
Life time: 50,000h
Installation: Horizontal
Material: PC
Application:
electric heaters;
oil heaters;
electrical fans;
electrical irons;
air conditions;
air purifiers;
physiotherapy equipment;
sports equipment;
other electrical appliances and equipment that need anti-fall protection.
Technical specification: Rated voltage AC110-220V (50/60Hz)/DC24V Operating Temperature -20 °C ~ +50 °C Operating power 800W Installation Method Ceiling mounted Detecting angle 360 degree Contacting way input 220VAC, output 220VAC Lux range 5 Lux ~ 500Lux ± 20% ajustable Delay range 16~1000 Secs ± 30% Detector destance 8 M
When the host tilts or falls, the ball inside the anti-dump switch is tilted and displaced along with the housing under the action of gravity. The tablet is restored to its original position due to the detachment of the ball, and the switch is instantly disconnected, thereby reach the purpose of cutting off the power or circuit TS-IR01 High Sensitive Horizontal Tilt Switch is a inclination switch produced by EPT Sensor. With a measurement range is +/- 90, the output cable turns to closed (or disconnected) in case the measured inclination is larger than alarm threshold value, if otherwise, the output cable is normally open (or closed) if the measured inclination does not reach alarm threshold value. Users are required to purchase an extra relay since low voltage. It is characterized by its small size, high consistency and stability. As a highly cost-effective inclination switch, it is able to work under an industrial range of temperature from -40~85.
Product type: ts-1134 Category: touch switch Dimensions: w6.2xd2.5xh3.5 Welding method: reflow soldering Installation: sink plate type Operation intensity: a: 100 b: 180 c: 260 Mode of operation: side operation Packing: a: bag b: package Life: d1: 10 million times Waterproof: Type of travel: 0.15� 0.05mm Height from mounting surface (mm): 3.5
The float switch is application in all those cases where it is necessary to control the level of non-aggressive liquids, both in civil and industrial facilities (wells, cisterns, cesspools, sewers). Has a high resistance to most acids and bases mineral up to 10% concentration. The housing of the float is made of polypropylene copolymer: it is impact resistant, suitable for contact with food and nickable by solvents at room temperature. Degree of protection to "CEI 64-8" - IP 67 (immersion up to 20 meters). Maximum operating temperature: 70 C. The neoprene cable H07 RN-F 3 1 mm is IMQ and T V approved. Buy Float Switch 2 Mtr online in India at wholesale rates. If you have been looking for Float Switch 2 Mtr dealers, your search ends here as you can get the best Float Switch 2 Mtr distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Float Switch 2 Mtr of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Float Switch 2 Mtr prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Float Switch 2 Mtr rates and quality assured products only from the best of brands with exclusive brand discounts you wont find anywhere else. Procure Float Switch 2 Mtr today and avail the best offers on your purchase.
round water fluid level controller float switch place of origin : Zhejiang Province ,China (Mainland) brand name : NIN model number : XK-15-1 rated voltage : 250V(380V) rated current : 10A(3A) operating temperature : 0 degrees Celsius ~ 80degrees Celsius mechanical life : more than 100000 times electrical life : more than 80000 times protection degree : IP68CS
water level controller float ball switch place of origin : Zhejiang Province,China(Mainland) brand name : NIN model number : XK-15-4 rated voltage : 250V(380V) rated current : 10A(3A) operating temperature : 0 degrees Celsius ~ 80degrees Celsius mechanical life : more than 100000 hours electrical life : more than 80000 hours protection degree : IP68CS
APT-103M22CC Optical media module 1.According with ieee802.3 ieee802.3u ieee802.3x Ieee802.1q 100base-tx 100base-tx 100base-fx standard. 2.Afford tcp/ip, pppoe, dhcp, icmp, nat protocol. 3.Flow control:full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard. 4.Electric port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5.Port supply auto-mdi/mdix automatic reverse. 6.Support storage transmit mode. 7.Support electric port's 10m 100m mode and self-adapt mode to switch. 8.Afford the state indicator, external power(output 5v~50hz 1a) 9.Interface:electric port:rj-45 fiber port:sc 10.Twisted-pair:cat5 cat6 11.Multimode fiber: 50/125, 62.5/125um 12.Working temperature:0~50 degree 13.Storage temperature:-20~70 degree 14.Humidity:5%~90%(noncondensing) Connect type: sc Fiber type: multimode Wavelength: 1300nm Typical distance: 2km Min tx pwr: -19.0dbm Max tx pwr:-14.0dbm Sensitivity:-31.0dbm Link budget:12.0dbm
Technical parameter 1. According with IEEE802.3ab/z, IEEE 802.3u, IEEE 802.3X, IEEE802.1Q, 10BASE-T, 100B ASE-TX, 1000BASE-TX, 1000Base-SX, 1000Base-LX standard. 2. Support TCP/IP, PPPOE, DHCP, ICMP, NAT protocol. 3. Flow control: Full-duplex adopt IEEE802.3X, half-duplex adopt Backpressure standard. 4. Electricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed. 5. Port supply Auto-MDI/MDIX automatic reverse. 6. Support storage transmit mode, cashe capability is 256K. 7. Support electricity port's 1000M mode or self-adapt mode's switch. 8. Support state indicator, external power(output 5V~50Hz 1A) 9. Interface: Electricity port: RJ-45 fiber: SC 10. Twisted-pair: Cat. 5 Cat. 6 11. Singlemode fiber: 8/125, 8.3/125, 9/125um 12. Working temperature: 0~50 degree 13. Storage temperature: -20~70 degree 14. Humidity: 5%~90% 15. Size: 32*128*158mm (H*W*L) Specification Connect type: SC Fiber type: Singlemode Wavelength: 1310/1550nm Typical distance: 20KM Min TX PWR: -6.0dBm Max TX PWR: 0.0dBm Sensitivity: < -22dBm Link budget: 16.0dBm Size: 32*128*158mm (H*W*L) 1KG/pair
Tact Switch MT 1101 SE is applied to low current circuit tactile switch for electronic equipment. Storage temperature range 96 hours maximum for continuous storage over a range The standard test conditions shall be 5 ~ 35 degree Celsius in temperature.